• Features

    • Scalable 14-bit analog input for 0 ... 10 V or 0/4 ... 20 mA
    • Power supply 24 VDC
    • Miniature norm panel housing
    • 5 digits LED display with 8 mm height
    • Display range -19999 ... 99999, adjustable zero and full-scale value
    • Latch input to freeze the display, minimum/maximum record memory
    • Easy to set up with only two front keys and menu support
    • Delivery includes adapter frame for 50 x 25 mm cut out and label set with dimensions
    • Front dimension 48 x 24 x 59 mm (1.89 x 0.945 x 2.322")
  • Features

    • 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
    • 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 300 kHz
    • 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
    • 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
    • Loop time approx. 250 µs
    • Power supply 24 VAC and 17 … 40 VDC
    • Compact norm panel housing (according to EN 60715)
    • Top hat rail mounting by using SM300 support brackets (option)
    • Setup via keys or via PC by serial RS232 interface
    • PROFIBUS connection via Motrona gateway PB251
  • Features

    • 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
    • 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 300 kHz
    • 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
    • 4 potential-free changeover relay outputs
    • 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
    • Loop time approx. 250 µs
    • Power supply 24 VAC and 17 … 40 VDC
    • Compact norm panel housing (according to EN 60715)
    • Top hat rail mounting by using SM600 support brackets (option)
    • Setup via keys or via PC by serial RS232 interface
    • PROFIBUS connection via Motrona gateway PB251
  • Features

    • MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
    • The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
    • Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
    • The number of successive axes can be extended arbitrarily via a cascading output.
    • MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
    • PROFIBUS connection possible via gateway PB251 (see accessories)
  • Features

    • Power supply 10 ... 30 VDC
    • Compact norm panel housing
    • Preset range: 6 digits or 5 digits with sign
    • DIL-switch for set up of the transmission parameters
    • Dimension H x B x T = 96 x 48 x 140 mm (3.78 x 1.89 x 5.51 ")
  • Features

    Processor:
    • Siemens C515C operating at 10 MHz
    Power supply:
    • Using internal power of the motion controller
    CAN Communication:
    • DIN ISO 11898
    • CANopen (CiA DS301)
    Baud rates:
    • 10, 20, 50, 125, 250, 500, 1000 kBit/s (adjustable)
  • Features

    • 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
    • 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 300 kHz
    • 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
    • 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
    • Loop time approx. 250 µs
    • Cutting length specification via keyboard
    • Power supply 24 VAC and 17 … 40 VDC
    • Compact norm panel housing (according to EN 60715)
    • Top hat rail mounting by using SM300 support brackets (option)
    • Setup via keys or via PC by serial RS232 interface
    • PROFIBUS connection via Motrona gateway PB251
  • Features

    • 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
    • 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 300 kHz
    • 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
    • 4 potential-free changeover relay outputs
    • 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
    • Loop time approx. 250 µs
    • Cutting length specification via BCD decade switch on the front
    • Power supply 24 VAC and 17 … 40 VDC
    • Compact norm panel housing (according to EN 60715)
    • Top hat rail mounting by using SM600 support brackets (option)
    • Setup via keys or via PC by serial RS232 interface
    • PROFIBUS connection via Motrona gateway PB251
  • Features

    • 3 x 32-bit 10MHz position registers
    • Marker input for each channel
    • Fully featured, Renishaw probe input
    • Synchronisation and triggering facilities
    • 48 configurable digital IO
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • ±5v& ±12v fused encoder supplies
    • 32-bit PCI 2.2 Plug 'n' Play compatible
    • Support & demonstration software
    **We can offer same day delivery within the UK. Next day delivery to many European countries and the USA.
  • Features

    • 3 x 32 bit 10Mhz position registers
    • Marker input for each channel
    • Fully featured Renishaw probe input
    • Dual input optical edge detector system
    • Differential or single ended inputs
    • 3 stage digital input filters
    • USB 2.0 plug and play compatible
    • Comprehensive user manual
    • Support & demonstration software on USB
    • Windows XP/7/8/10 32 and 64 bit
    **We can offer same day delivery within the UK. Next day delivery to many European countries and the USA.
  • Features

    • 3 x 32 bit 10Mhz position registers
    • Marker input for each channel
    • Fully featured Renishaw probe input
    • Dual input optical edge detector system
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • USB 2.0 plug-and-play compatible
    • Comprehensive user manual
    • Support & demonstration software on USB
    • Windows XP/7/8/10 32 and 64-bit
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
  • Features

    • 3 x 32 bit 10Mhz position registers
    • Marker input for each channel
    • Fully featured Renishaw probe input
    • Dual input optical edge detector system
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • USB 2.0 plug-and-play compatible
    • Comprehensive user manual
    • Support & demonstration software on USB
    • Windows XP/7/8/10 32 and 64-bit
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
  • Features

    • 4 x 32-bit position registers
    • Programmable data & scan rates
    • Programmable bit length
    • Synchronisation and triggering facilities
    • 48 configurable digital IO
    • Power fail/parity detection
    • Gray/binary formats
    • ±5v & ±12v fused encoder supplies
    • x1 PCIe 2.0 Plug 'n' Play compatible
    • Support & demonstration software USB
    **We can offer same day delivery within the UK. Next day delivery to many European countries and the USA.
  • Features

    • 4 x 32 40Mhz position registers
    • Marker input for each channel
    • Fully featured, Renishaw probe input
    • Synchronisation and triggering facilities
    • 48 configurable digital IO
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • ±5v& ±12v fused encoder supplies
    • x1 PCIe 2.0 plug-and-play compatible
    • Comprehensive user manual
    • Support & demonstration software
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
  • Features:

    • Selectable interpolation factor 10, 25, 50, 100
    • Accepts 11µA or 1vpp or 2Vpp signals
    • Handles marker/index channel
    • Maximum input frequency 125kHz
    • Maximum output frequency 5MHz
    • Extremely small form factor
    • RS422 line driver output
    • Fully synchronous operation
    • +5v operation
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
  • Features

    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • Adjustable frequency of the init pulses from 62.5 Hz to 5 kHz
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • Auxiliary voltage output 24 VDC or 5 VDC for encoder supply
    • 8-decade LCD display (colour: red, green, yellow)
    • Resistive touchscreen
    • Standard housing with 96 x 48 mm and IP65 protection
    • Intuitive and easy parameterization by plain text and touchscreen
    • Numerous functions such as scaling, filter, zero offset, counting direction etc.
    • Linearization with 24 interpolation points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    Options can be combined.
  • Features

    • SIL3 and PLe certification
    • Safety functions equivalent to EN 61800-5-2 (SS1, SS2, SOS, SLS, SDl, SSM, SLI, SBC, STO, SMS)
    • 2 encoder inputs with format SIN+, SIN-, COS+, COS- [1 Vss]
    • 2 pulse inputs with format A, /A, B, /B [RS422]
    • 2 pulse- or control inputs with format A, B, 90° [HTL / PNP] (for rotary encoder, proximity switches or commands)
    • Input frequency up to 500 kHz
    • Forced-guided redundant output relay (NO)
    • 4 control outputs with push-pull characteristic, short-circuit-proof, [HTL], each inverse and redundant
    • Safety related 14 bit analog output for 4 ... 20 mA (scalable)
    • With signal splitter
    • Power supply 18 ... 30 V
    • Compact housing for 35 mm mounting top hat rail
    • (according to EN 60715)
    • Setup via USB port by operator software or plug-in display and programming unit BG230 (accessories)
  • Features

    • SIL3 and PLe certification
    • Safety functions equivalent to EN 61800-5-2 (SS1, SS2, SOS, SLS, SDl, SSM, SLI, SBC, STO, SMS)
    • 2 encoder input with format SIN+, SIN-, COS+, COS- [1 Vss]
    • 2 pulse- or control inputs with format A, B, 90° [HTL / PNP] (for rotary encoder, proximity switches or commands)
    • Input frequency up to 500 kHz
    • Forced-guided redundant output relay (NO)
    • 4 control outputs with push-pull characteristic, short-circuit-proof, [HTL], each inverse and redundant
    • Safety-related 14 bit analogue output for 4 ... 20 mA (scalable)
    • With signal splitter
    • Power supply 18 ... 30 V
    • Compact housing for 35 mm mounting top hat rail (according to EN 60715)
    • Setup via USB port by operator software or plug-in display and programming unit BG230 (accessories)
  • Features

    • Single channel pulse input [HTL]
    • Input frequency up to 20 kHz
    • Programmable input filter for mechanical input contacts
    • Power supply 24 VDC
    • Miniature norm panel housing
    • 6 digits LED display with 8 mm height
    • Display range  -199999 ... 999999
    • Dimension B x H x T = 48 x 24 x 59 mm (1.89 x 0.94 x 2.32 ")
  • Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
  • Features

    • Very high-performance economical encoder
    • Low profile—less than 25.4 mm height and 38 mm diameter
    • Extended temperature operating ranges available
    • Up to 12-pole commutation optional (for brushless motor control)
  • Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
  • Features

    • 5mm Opto-ASIC encoder with a low profile (50.8mm)
    • Imperial bore sizes range from 0.625” to 1.125”
    • Metric bore sizes ranging from 6 mm to 28 mm
    • Single replacement solution for 50.8mm to 88.9mm encoders
    • Resolutions to 10,000 PPR, frequencies to 1 MHz
    • Versatile flexible mounting options
    • RoHS compliant
    • Corrosion-Resistant Option
  • Features

    • Standard Size 25 package (63.5mm x 63.5mm)
    • Optical technology for high accuracy
    • Resolutions from 1 to 65,536 PPR (262,144 quadrature counts)
    • Servo and flange mounting
    • IP67 sealing available
  • Features

    • 5mm Opto-ASIC encoder with a low profile (50.8mm)
    • Imperial bore sizes range from 0.625” to 1.125”
    • Metric bore sizes ranging from 6 mm to 28 mm
    • Single replacement solution for 50.8mm to 88.9mm encoders
    • Resolutions to 10,000 PPR, frequencies to 1 MHz
    • Versatile flexible mounting options
    • RoHS compliant
    • Corrosion-Resistant Option

Title

Go to Top