+44 (0)1903 788287

f/U Converter and Signal Converter Frequency >>> Analog / Serial / Parallel / IO-Link

The devices shown here are used to convert frequencies into analogue standard signals (V or mA) or parallel signals (BCD, binary or grey code) and also represent the converted values ​​via a serial output interface. The signal converters, that are provided for installation in a control cabinet, typify high reliability, easy operation, precise conversion and high-frequency ranges. Numerous programmable additional functions round off the respective functional range. The snap-on housing for the top hat rail (according to EN60715) allows a quick and easy assembly.

Further possibilities for converting frequencies into analogue signals and/or serial formats are also available with our indicators of the DX series (see tachometers).

Filters

  • Motrona FP210: Signal Converter Frequency >>> Parallel

    Features

    • Frequency inputs A, B [HTL], A, / A, B, / B [RS422, HTL]
    • 3 control inputs (hold) for PNP signals [10 ... 30 VDC]
    • SSI input in the format DATA +, DATA-, CLOCK +, CLOCK- up to 32 bits
    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • Input frequency up to 1 MHz
    • 25-bit parallel output push-pull in BCD, binary or Gray code format
    • Power supply 18 ... 30 VDC
    • Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
    Details

  • Motrona FU210: Signal Converter Frequency >>> Analog / Serial RS232/RS485

    Features

    • Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
    • Input frequency up to 1 MHz [RS422], 200 kHz [HTL]
    • Analog output ±10 V or 0/4 ... 20 mA, 16 Bit
    • Power supply 18 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Setup via operator software OS6.0
    • Serial RS232- / RS485 interface
    • SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • USB interface and RS232/RS485 interface for configuration and serial readout
    Details

  • Motrona IO222: Signal Converter Incremental >>> IO-Link

    Features

    • 1 incremental input (A, /A, B, /B)
    • for HTL/TTL/RS422 for NPN/PNP/NAMUR encoders and sensors
    • optionally 3 control inputs for PNP signals [10 ... 30 VDC]
    • IO link interface
    • Power supply 12 ... 30 VDC
    • Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top