Encoder Technology is leading suppliers of Rotary, Absolute & Incremental Encoders and Resolvers.
Our success is down to our ability to listen to the needs of our customers and responding with both technical competence and speed, recommending the best Encoder for their need and budget.
We have nearly 45 years of experience in industrial sensing and control, so you can be assured that we have depth and breadth of knowledge to provide the best sensing solution to meet your technical and budgetary needs.
-
Features
- 5mm Opto-ASIC encoder with a low profile (50.8mm)
- Imperial bore sizes range from 0.625” to 1.125”
- Metric bore sizes ranging from 6 mm to 28 mm
- Single replacement solution for 50.8mm to 88.9mm encoders
- Resolutions to 10,000 PPR, frequencies to 1 MHz
- Versatile flexible mounting options
- RoHS compliant
- Corrosion-Resistant Option
-
Features
- 5mm Opto-ASIC encoder with a low profile (50.8mm)
- Imperial bore sizes range from 0.625” to 1.125”
- Metric bore sizes ranging from 6 mm to 28 mm
- Single replacement solution for 50.8mm to 88.9mm encoders
- Resolutions to 10,000 PPR, frequencies to 1 MHz
- Versatile flexible mounting options
- RoHS compliant
- Corrosion-Resistant Option
-
Features
- Body: Precision Machined Aluminium
- Cover: Precision Machined Aluminium (Powder Coated)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
- Protection: IP65
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM (Higher on request)
- Torque: 2Ncm (typical)
- Inertia: 100gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Body: Stainless Steel (316)
- Cover: Stainless Steel (316)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing + Single lip seal
- Rear: Single lip seal on the rear of the cover
- Protection: (IP66 / IP67)
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM
- Torque: 4Ncm (typical)
- Inertia: 200gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Body: Precision Machined Aluminium
- Cover: Precision Machined Aluminium (Powder Coated)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing
- Rear: Single lip seal on the rear of the cover
- Protection: IP65
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM (Higher on request)
- Torque: 3Ncm (typical)
- Inertia: 600gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Number of output pulses per revolution 5.000 - 500.000 ppr
- Line number on disc (z) 5.000
- Maximum shaft speed 8000 rpm
- The permissible motion of the shaft - axial: ± 1.00 mm - radial: 0.02 mm
- Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
- Starting torque at 20°C ≤ 0.01 Nm
- Rotor moment of inertia < 20x10-4 kgm2
- Protection (housing) (IEC 529) IP64
- Protection (shaft side) (IEC 529) IP64
- Maximum weight without cable 0.8 kg
- Operating temperature -20...+70°C
- Storage temperature -30...+85°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (11 ms) ≤ 300m/s²
-
Features
- Number of output pulses per revolution 18000-1800000 ppr
- Line number on disc (z) 18000
- Reference signal - standard: 1 per shaft revolution - distance coded: 36 per shaft revolution
- Maximum shaft speed 5000 rpm
- Maximum shaft load - radial: 10 N
- Accuracy ± 7.5 arc. sec; ± 5.0 arc. sec
- Starting torque at 20°C ≤ 0.01 Nm
- Rotor moment of inertia < 20x10-6 kgm2
- Protection (IEC 529) IP64
- Maximum weight without cable 0.7 kg
- Operating temperature 0...+50°C
- Storage temperature -30...+80°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (11 ms) ≤ 300m/s²
-
Features
- Number of output pulses per revolution 18000-1800000 ppr
- Line number on disc (z) 18000; 36000
- Reference signal - standard: 1 per shaft revolution - distance coded for z = 18000: 36 per shaft revolution - distance coded for z = 36000: 72 per shaft revolution
- Permissible mech. speed ≤ 1000 rpm
- Max. operating speed 300 to 500 rpm
- Accuracy ± 2.5 arc. sec
- Permissible shaft load - axial: ≤ 30 N - radial: ≤ 30 N
- Starting torque at 20°C ≤ 0.012 Nm
- Rotor moment of inertia < 3.7x10-4 kgm2
- Protection (IEC 529) IP64
- Maximum weight without cable 3.5 kg
- Operating temperature 0...+70°C
- Storage temperature -30...+85°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (11 ms) ≤ 300m/s²
-
Features
- Number of output pulses per revolution 18000-1800000 ppr
- Line number on disc (z) 18000; 36000
- Reference signal - standard: 1 per shaft revolution - distance coded for z = 18000: 36 per shaft revolution - distance coded for z = 36000: 72 per shaft revolution
- Permissible mech. speed ≤ 1000 rpm
- Max. operating speed 300 to 500 rpm
- Accuracy ± 2.5 arc. sec
- Permissible shaft load - axial: 0.02 mm - radial: 0.02 mm
- Starting torque at 20°C ≤ 0.012 Nm
- Rotor moment of inertia < 3.7x10-4 kgm2
- Protection (IEC 529) IP64
- Maximum weight without cable 4.1 kg
- Operating temperature 0...+70°C
- Storage temperature -30...+85°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (11 ms) ≤ 300m/s²
-
Features
- Number of output pulses per revolution 3.600.000
- Line number on disc (z) 36000
- Reference signal - 1 per shaft revolution - 36 per shaft revolution - 72 per shaft revolution
- Permissible mech. speed ≤ 1000 rpm
- Max. operating speed 300 to 500 rpm
- Accuracy ± 2.0 arc. sec
- Permissible shaft load - axial: 0.02 mm - radial: 0.02 mm
- Starting torque at 20°C ≤ 0.5 Nm
- Rotor moment of inertia < 0.9x10-3 kgm2
- Protection (IEC 529) IP64
- Maximum weight without cable 4.5 kg
- Operating temperature 0...+70°C
- Storage temperature -30...+85°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (11 ms) ≤ 300m/s²
-
Features
- Type: Photoelectric rotary encoder (converts rotational movement into electrical signals)
- Function: Incremental (tracks changes in rotation rather than absolute position)
- Diameter: Compact size of 28 mm
- High resolution: Up to 25,000 output pulses per revolution (providing detailed rotational information)
- Benefit: Well-suited for applications with limited space due to its small size
-
Features
- Number of output pulses per revolution 100-108000 ppr
- Maximum shaft speed 10000 rpm
- Permissible motion of shaft - axial: ± 0.5 mm- radial: ± 0.05 mm
- Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
- Starting torque at 20°C ≤ 0.025 Nm
- Rotor moment of inertia < 1.5x10-4 kgm2
- Protection (housing) (IEC 529) IP64
- Protection (shaft side) (IEC 529) IP64
- Maximum weight without cable 0.3 kg
- Operating temperature -10...+70°C
- Storage temperature -30...+80°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (5 ms) ≤ 1000 m/s²
-
Features
- Number of output pulses per revolution 100-108000 ppr
- Maximum shaft speed 10000 rpm
- The permissible motion of the shaft - axial: ± 0.5 mm - radial: ± 0.05 mm
- Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
- Starting torque at 20°C ≤ 0.025 Nm
- Rotor moment of inertia < 1.5x10-4 kgm2
- Protection (housing) (IEC 529) IP64
- Protection (shaft side) (IEC 529) IP64
- Maximum weight without cable 0.3 kg
- Operating temperature -10...+70°C
- Storage temperature -30...+80°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (5 ms) ≤ 1000 m/s²
-
Features
- Type: Non-contact magnetic linear encoder (measures displacement without physical contact)
- Measuring length: Up to 50 meters
- Function: Converts linear movements of machine components into electrical signals with information about:
- Value: Distance travelled
- Direction: Forward or backward movement
- Durability: Designed for harsh industrial environments and resistant to various contaminants and physical impacts.
- Components:
- Metal-based magnetic band (MP): Stores the encoded information
- Reading head: Detects the magnetic field variations on the band and converts them into electrical signals
- Profile rail (PS) with protective band: Provides mounting and protects the reading head
-
Features
- Type: Photoelectric linear displacement measuring device (measures changes in position)
- Measuring length: Up to 2.040 mm
- Grating period: Two options available: ±20 µm or ±40 µm (determines the smallest detectable movement)
- Accuracy: Up to ±3 µm (indicates the encoder's closeness to the actual displacement)
-
Features
- Type: Incremental linear displacement measuring device (measures changes in position)
- Measuring length: Up to 3.240 mm
- Accuracy: Up to ±3 µm within any meter of its measuring length (accuracy scales with length)
- Vibration resistance: More resistant to vibrations than the L18 series encoders
-
Features
- Similar to the L35 series: Shares most functionalities and specifications with the L35 series encoders.
- Different mounting parameters: Requires distinct mounting methods compared to the L35 series.
- Measuring length: Up to 3.240 mm.
- Enhanced vibration resistance: More resistant to vibrations than the L18 series encoders, making it suitable for applications with higher vibration levels.