Motrona’s displays and evaluation systems ensure precise monitoring of analogue, pulse and absolute value information. The significant parameters for rotating and linear processes are precisely monitored, evaluated and displayed.
These display devices can perform complex data manipulation such as summing, difference, filtering, linearization totalization and comparison between input variables. Additionally, the digital displays provide up to four preset values for relay and transistor outputs. The set-up procedures are straightforward, using an intuitive menu system for entry and adjustment of parameters. Display devices equipped with a serial interface also allow operation and configuration using our OS user software.
Application areas
The applications for our digital displays are numerous. Depending on the type of display, the following tasks can reliably be performed:
Piece/length detection
Speed/Tachometer
Processing time/Timer
Position/length/angle measurement
Determination of flow or mixing ratio
Determination of filling level and pressure
Speed Tachometer
Piece Counter
Position Measurement
A unique selling point is the simultaneous acquisition and display of values from different measurement methods. With the MX350, it is possible to measure a speed/frequency and a position/number at the same time. With this feature, Motrona’s MX350 is unique on the market.
In addition to the classic measurement and display tasks, our process displays can also be used with an anemometer. The term anemometer is made up of the Greek words anemos = wind and métron = measure.
With the RL option, the touchMATRIX® series is equipped with two relay outputs and can work as a wind warning device. The anemometers are used in the following areas:
Cranes
Windmills
Funiculars
Traffic meteorology
Building Technology
Overburden and open-cast excavators
Amusement parks
Floodgates
By operating two AX350/AO/RL in parallel, safe monitoring of the wind speed can be guaranteed. In addition to wind monitoring, the core competencies of measuring and displaying of Motrona’s wind detectors are reliably retained.
Display variations
The special feature of these display devices is the versatile touch screen. Thus the following representations are possible:
Two-line display without units
4 decades large display
Tachometer for simultaneous display of speed and position
Yellow display for quick start for enter preselection values
Green display with actual/minimum/maximum values of input 1 and input 2
Classic red display
All options can also be displayed in red, green and yellow.
The 4-decade large display ensures a better readability. even if the operator is far away. Our dual display with parameters allows, in combination with the MX350, the simultaneous measurement and display of two values from different measuring methods. For example, it is possible to measure and display a frequency and a position.
To filter products further, please head to our Stocklist page.
2 universal 16-bit analog inputs for ±10 V or 0/4 … 20 mA
3 control inputs for HTL / PNP signals
Power supply 18 ... 30 VDC
24 V auxiliary output for encoder supply
High accuracy reference output 10 V for potentiometers > 1 kOhm
3.78 x 1.89-inch norm panel housing and IP65 protection
Bright and high-contrast display with event-dependent color variations
Emulation of a 7-segment display inclusively icons and units
Intuitive and easy parameterization by plain text and touchscreen
Operating modes for visualization of INPUT 1, INPUT 2 or combinations of IN1 + IN2, IN1 - IN2, IN1 x IN2, IN1: IN2
Numerous features, e. g. Ttara, filters, averaging
Linearization with 24 control points
Option IO (= IO-Link Device)
Data transfer via COM3 (230,4 kBaud)
Cycle times < 3 msec
Process data IN 32 Byte (6 x process values from AX350):
- Analog value 1 (scaled / linearized) and unit
- Analog value 2 (scaled / linearized) and unit
- Analog value 1 (scaled / linearized) with totalisation and unit
- Analog value 2 (scaled / linearized) with totalisation and unit
- Shortcut analogue value 1 (scaled / linearized) with analogue value 2 (scaled / linearized) and unit
- Shortcut totalisator analogue value 1 (scaled / linearized) with totalisator analogue value 2 (scaled / linearized) and unit
Process data Out 8 Byte (2 x IO-Link process values to AX350):
- IOL process value Out 1 with scaling, adjustable decimal point and programmable units
- IOL process values Out 2 with scaling, adjustable decimal point and programmable units
Combinable with further options:
Option AC: Power supply 115 ... 230 VAC
Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
Option CO: 4 control outputs, serial RS232 interface
Option CR: 4 control outputs, serial RS485 interface