+44 (0)1903 788287
Filtered (37)

  • Encoder Technology TBX50 Single Turn Standard Shaft Absolute Encoder

    Features

    • Robust aluminium or stainless steel housing (wall thicknesses up to 5 mm)
    • Stainless steel shaft and ball bearing - ball bearing with Simmer ring
    • Rotor with shaft and permanent magnet mounted in pre-chamber
    • Sensor circuit consisting of ASIC
    • Hall elements and interface electronics in enclosed main chamber
    • Housing protection type IP 69K additionally cast
    • Electrical connection via cable (open cable ends)
    Details

  • Motrona DP350: touchMATRIX® Indicator for transonic distance measurement

    Features

    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • Adjustable frequency of the init pulses from 62.5 Hz to 5 kHz
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • Auxiliary voltage output 24 VDC or 5 VDC for encoder supply
    • 8-decade LCD display (colour: red, green, yellow)
    • Resistive touchscreen
    • Standard housing with 96 x 48 mm and IP65 protection
    • Intuitive and easy parameterization by plain text and touchscreen
    • Numerous functions such as scaling, filter, zero offset, counting direction etc.
    • Linearization with 24 interpolation points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    Options can be combined.
    Details

  • Motrona IX350: touchMATRIX® Combi Indicator Absolute Position / Speed

    Features

    • SSI input with format DATA+, DATA-, CLOCK+, CLOCK-
    • SSI clock frequencies up to 1 MHz
    • Master or Slave operation
    • For single-turn and multi-turn encoders with 10 … 32 Bit
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • 24 V auxiliary output for encoder supply
    • 3.78 x 1.89-inch norm panel housing and IP65 protection
    • Bright and high-contrast display with event-dependent color variations
    • Emulation of a 7-segment display inclusively icons and units
    • Intuitive and easy parameterization by plain text and touchscreen
    • Operating modes such as scaling and bit blanking
    • Linearization with 24 control points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputsOptions can be combined.
    Details

  • Motrona IX355: touchMATRIX® Combi Indicator Absolute Position / Speed

    Features

    • SSI input with format DATA+, DATA-, CLOCK+, CLOCK-
    • SSI clock frequencies up to 1 MHz
    • Master or Slave operation
    • For single-turn and multi-turn encoders with 10 … 32 Bit
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • 5 / 24 V auxiliary output for encoder supply
    • 3.78 x 1.89-inch norm panel housing and IP65 protection
    • Bright and high-contrast display with event-dependent color variations
    • Emulation of a 7-segment display inclusively icons and units
    • Intuitive and easy parameterization by plain text and touchscreen
    • Operating modes such as scaling, bit blanking and wire break monitoring
    • Linearization with 24 control points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    Options can be combined
    Details
  • Nemicon 12SA Incremental Encoder

    Nemicon 12SA Incremental Encoder

    Features

    • Ultra Miniature Size
    • High reliability with mounting the Opt-ASIC (by components quantities decreased)
    • Low torque and low inertia
    • High signal accuracy
    • Type: 12SA
    • Pulse: 100-256
    • Outer Diameter: φ12
    • Ingress Protection: IP00
    Details
  • Nemicon 18M Incremental Encoder

    Nemicon 18M Incremental Encoder

    Features

    • Ultra Miniature Size
    • Shaft Diameter of 2.5mm available
    • Type: 18M
    • Pulse: 200-1600
    • Outer Diameter: φ18
    Details
  • Nemicon 18S Incremental Encoder

    Nemicon 18S Incremental Encoder

    Features

    • Ultra Miniature Size
    • A shaft Diameter of 2.5mm is available
    • Type: 18S
    • Pulse: 100-1600
    • Outer Diameter: φ18
    • Ingress Protection: IP50
    Details
  • Nemicon 38H Incremental Encoder

    Nemicon 38H Incremental Encoder

    Features

    • Compact size for general purpose
    • Type: 38H
    • Pulse: 100-4096
    • Outer Diameter: φ38
    • Ingress Protection: IP50
    Details
  • Nemicon 38S Incremental Encoder

    Nemicon 38S Incremental Encoder

    Features

    • Compact size for general purpose
    • Type: 38S
    • Pulse: 100-4096
    • Outer Diameter: φ38
    • Ingress Protection: IP50
    Details
  • Nemicon 38SG Incremental Encoder

    Nemicon 38SG Incremental Encoder

    Features

    • Compact size for general purpose
    • Type: 38SG
    • Pulse: 100-2048
    • Outer Diameter: φ38
    • Ingress Protection: IP50
    Details
  • Nemicon 7S Incremental Encoder

    Nemicon 7S Incremental Encoder

    Features

    • Ultra-miniature size
    • OD 7.2mm
    • Height 10.5mm
    • High Resolution
    • Up to 400 resolution
    • Pulse: 100～400
    • Type: 7s
    • Outer Diameter: φ7
    Details
  • Nemicon OEZ Incremental Encoder

    Nemicon OEZ Incremental Encoder

    Features

    • Compact high-speed type
    • Type: OEZ
    • Pulse: 36-1500
    • Outer Diameter: φ28
    • Ingress Protection: IP50
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top