+44 (0)1903 788287
Filtered (40)

  • Encoder Technology TBX50 Single Turn Standard Shaft Absolute Encoder

    Features

    • Robust aluminium or stainless steel housing (wall thicknesses up to 5 mm)
    • Stainless steel shaft and ball bearing - ball bearing with Simmer ring
    • Rotor with shaft and permanent magnet mounted in pre-chamber
    • Sensor circuit consisting of ASIC
    • Hall elements and interface electronics in enclosed main chamber
    • Housing protection type IP 69K additionally cast
    • Electrical connection via cable (open cable ends)
    Details
  • motrona-DZ210

    Motrona DZ210: Direction and Standstill Monitor

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 500 kHz
    • 2 output relays with potential-free change-over contact (forward, reward and zero motion)
    • 2 transistor outputs with High-Side-Driver, short-circuit-proof
    • Power supply 17 ... 30 VDC
    • Snap-on housing for top hat rail (according to EN 60715)
    • DIL switch for setup of input characteristic and definition of standstill
    Details

  • Motrona DZ260: Speed Monitor with 3 Output Relays and Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • 14 Bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ261: Speed Monitor with 3 Transistor Outputs and Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 fast transistor switching outputs [PNP]
    • 14 bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ266: Speed Monitor with Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 14 bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ267: Speed Monitor with 3 Output Relays

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ269: Speed Monitor with 3 Output Relays

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details
  • Nemicon 12SA Incremental Encoder

    Nemicon 12SA Incremental Encoder

    Features

    • Ultra Miniature Size
    • High reliability with mounting the Opt-ASIC (by components quantities decreased)
    • Low torque and low inertia
    • High signal accuracy
    • Type: 12SA
    • Pulse: 100-256
    • Outer Diameter: φ12
    • Ingress Protection: IP00
    Details
  • Nemicon 18M Incremental Encoder

    Nemicon 18M Incremental Encoder

    Features

    • Ultra Miniature Size
    • Shaft Diameter of 2.5mm available
    • Type: 18M
    • Pulse: 200-1600
    • Outer Diameter: φ18
    Details
  • Nemicon 18S Incremental Encoder

    Nemicon 18S Incremental Encoder

    Features

    • Ultra Miniature Size
    • A shaft Diameter of 2.5mm is available
    • Type: 18S
    • Pulse: 100-1600
    • Outer Diameter: φ18
    • Ingress Protection: IP50
    Details
  • Nemicon 38H Incremental Encoder

    Nemicon 38H Incremental Encoder

    Features

    • Compact size for general purpose
    • Type: 38H
    • Pulse: 100-4096
    • Outer Diameter: φ38
    • Ingress Protection: IP50
    Details
  • Nemicon 38S Incremental Encoder

    Nemicon 38S Incremental Encoder

    Features

    • Compact size for general purpose
    • Type: 38S
    • Pulse: 100-4096
    • Outer Diameter: φ38
    • Ingress Protection: IP50
    Details
  • Nemicon 38SG Incremental Encoder

    Nemicon 38SG Incremental Encoder

    Features

    • Compact size for general purpose
    • Type: 38SG
    • Pulse: 100-2048
    • Outer Diameter: φ38
    • Ingress Protection: IP50
    Details
  • Nemicon 7S Incremental Encoder

    Nemicon 7S Incremental Encoder

    Features

    • Ultra-miniature size
    • OD 7.2mm
    • Height 10.5mm
    • High Resolution
    • Up to 400 resolution
    • Pulse: 100～400
    • Type: 7s
    • Outer Diameter: φ7
    Details
  • Nemicon OEZ Incremental Encoder

    Nemicon OEZ Incremental Encoder

    Features

    • Compact high-speed type
    • Type: OEZ
    • Pulse: 36-1500
    • Outer Diameter: φ28
    • Ingress Protection: IP50
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top