+44 (0)1903 788287
Filtered (17)
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15H Blind Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15T Through Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Features

    • 5mm Opto-ASIC encoder with a low profile (50.8mm)
    • Imperial bore sizes range from 0.625” to 1.125”
    • Metric bore sizes ranging from 6 mm to 28 mm
    • Single replacement solution for 50.8mm to 88.9mm encoders
    • Resolutions to 10,000 PPR, frequencies to 1 MHz
    • Versatile flexible mounting options
    • RoHS compliant
    • Corrosion-Resistant Option
    Details
  • Encoder Technology 260 Through hollow shaft Incremental encoder

    Encoder Technology 260 Through Hollow Shaft Incremental Encoder

    Features

    • Low profile 30.3mm
    • Up to 12 pole commutation
    • Thru-bore and hollow-bore (blind) styles
    • Simple, innovative flexible mounting system
    • Incorporates Opto-ASIC technology
    Details
  • Encoder Technology 75HA Through HolIow Shaft Incremental Encoder

    Encoder Technology 75HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 2Ncm (typical)
    • Inertia: 100gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 75HS-Hollow shaft incremental Encoder

    Encoder Technology 75HS Through Hollow Shaft Incremental Encoder

    Features

    • Body: Stainless Steel (316)
    • Cover: Stainless Steel (316)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing + Single lip seal
    • Rear: Single lip seal on the rear of the cover
    • Protection: (IP66 / IP67)
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM
    • Torque: 4Ncm (typical)
    • Inertia: 200gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Features

    • Size 25 / 63.5mm Diameter (Hollow Shaft)
    • Up to 12 Pole Commutation Available
    • Thru Bore and Blind Bore Options
    • Simple, Innovative Flexible Mounting System
    • Incorporates Opto-ASIC Technology
     
    Details
  • Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Features

    • Thru-bore design for easy mounting
    • Bore options to 1.375" and 32mm
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • 100° C operating temperature available
    Details
  • Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Features

    • Slim profile—only 34.5mm in depth
    • Thru-bore design for easy mounting
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • Bore options to 1.875" and 43mm
    Details
  • Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing
    • Rear: Single lip seal on the rear of the cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 3Ncm (typical)
    • Inertia: 600gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology A102H Large Bore Encoder

    Encoder Technology A102H Large Bore Through Hollow Shaft Encoder

    Features

    • Number of output pulses per revolution 5.000 - 500.000 ppr
    • Line number on disc (z) 5.000
    • Maximum shaft speed 8000 rpm
    • The permissible motion of the shaft - axial: ± 1.00 mm - radial: 0.02 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
    • Starting torque at 20°C ≤ 0.01 Nm
    • Rotor moment of inertia < 20x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.8 kg
    • Operating temperature -20...+70°C
    • Storage temperature -30...+85°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (11 ms) ≤ 300m/s²
    Details
  • Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Features

    • Number of output pulses per revolution 100-108000 ppr
    • Maximum shaft speed 10000 rpm
    • The permissible motion of the shaft - axial: ± 0.5 mm - radial: ± 0.05 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
    • Starting torque at 20°C ≤ 0.025 Nm
    • Rotor moment of inertia < 1.5x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.3 kg
    • Operating temperature -10...+70°C
    • Storage temperature -30...+80°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (5 ms) ≤ 1000 m/s²
    Details

  • Motrona IX350: touchMATRIX® Combi Indicator Absolute Position / Speed

    Features

    • SSI input with format DATA+, DATA-, CLOCK+, CLOCK-
    • SSI clock frequencies up to 1 MHz
    • Master or Slave operation
    • For single-turn and multi-turn encoders with 10 … 32 Bit
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • 24 V auxiliary output for encoder supply
    • 3.78 x 1.89-inch norm panel housing and IP65 protection
    • Bright and high-contrast display with event-dependent color variations
    • Emulation of a 7-segment display inclusively icons and units
    • Intuitive and easy parameterization by plain text and touchscreen
    • Operating modes such as scaling and bit blanking
    • Linearization with 24 control points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputsOptions can be combined.
    Details

  • Motrona IX355: touchMATRIX® Combi Indicator Absolute Position / Speed

    Features

    • SSI input with format DATA+, DATA-, CLOCK+, CLOCK-
    • SSI clock frequencies up to 1 MHz
    • Master or Slave operation
    • For single-turn and multi-turn encoders with 10 … 32 Bit
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • 5 / 24 V auxiliary output for encoder supply
    • 3.78 x 1.89-inch norm panel housing and IP65 protection
    • Bright and high-contrast display with event-dependent color variations
    • Emulation of a 7-segment display inclusively icons and units
    • Intuitive and easy parameterization by plain text and touchscreen
    • Operating modes such as scaling, bit blanking and wire break monitoring
    • Linearization with 24 control points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    Options can be combined
    Details

  • Motrona MX350: touchMATRIX® Combi Indicator Speed / Length (Quantity)

    Features

    • Pulse input with format A, B, 90° [HTL], single channel as an option
    • HTL input for encoder and sensors with NPN / PNP or NAMUR switching characteristics
    • Input frequency up to 250 kHz
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • 24 V auxiliary output for encoder supply
    • 3.78 x 1.89-inch norm panel housing and IP65 protection
    • Bright and high-contrast display with event-dependent colour variations
    • Emulation of a 7-segment display inclusively icons and units
    • Intuitive and easy parameterization by plain text and touchscreen
    • Multi-function device for use as speedometer/tachometer, pulse counter/position indicator, number counter and total counter
    • Operating modes such as scaling, average filter, start-up suppression
    • Linearization with 24 control points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    Options can be combined.
    Details

  • Motrona MX355: touchMATRIX® Combi Indicator Speed / Length

    Features

    • Incremental input with format A, /A, B, /B
    • Differential, single-ended HTL / RS422
    • Input frequency up to 1 MHz
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • 24 V auxiliary output for encoder supply
    • 3.78 x 1.89-inch norm panel housing and IP65 protection
    • Bright and high-contrast display with event-dependent colour variations
    • Emulation of a 7-segment display inclusively icons and units
    • Intuitive and easy parameterization by plain text and touchscreen
    • Multi-function device for use as speedometer/tachometer, pulse counter/position indicator, number counter and total counter
    • Operating modes such as scaling, average filter, start-up suppression
    • Linearization with 24 control points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    Options can be combined.
    Details
  • Tamagawa Seiki Hollowshaft Encoder

    Tamagawa Hollowshaft Encoder OIH48 Series TS5207N530

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top