+44 (0)1903 788287
Filtered (68)

  • Motrona MC800: Motion Controller

    Features

    • The MC800 hardware is a universal motion controller, which serves for sophisticated control tasks in today’s machine engineering and drive technology. This motion controller can cover a wide application range due to the function features and settings of the equipped control firmware.
    • Typical control applications are e.g. drive synchronization of a master and slave axis, index and print mark evaluation, rotating cross cutters, flying and eccentric shears, label printing machines and many more.
    • The unique feature of the MC800 is the integrated tandem drive controller. This enables to reach the acceleration requirements of heavy loads by splitting the necessary power to two independent drives.
    • Further features are the flexible and combinable input configuration for different types of encoders, measuring systems and sensors, the high frequency range up to 2 MHz and the adaptive interface architecture.
    • Due to an extremely short position loop time of 250 µs, a self-optimizing polynomial motion profile, and excellent accuracy - even at high line speeds, the MC800 ensures a very smooth motion with maximum protection of the mechanical parts.
    Details

  • Motrona PB800: Profibus DPV1 Interface Module

    Features

    • Internal power supply 3,3 V
    • Ambient temperature 0° C ... +60° C / 32° F ... 140° F (operating), -40° C ... +70° C / -40 ... 158° F (storage)
    • 9600 Bit/s ... 12 MBit/s Baud rates
    • SUB-D-9-pin female, galvanically isolated
    Details

  • Motrona PN800: Profinet Interface Modul

    Features

    • Internal power supply 3,3 V
    • Ambient temperature 0° C ... +60° C (operating), -40° C ... +70° C (storage)
    • 100 MBit/s Vollduplex
    • 2 Ethernet-Ports RJ45 with integrated switch, galvanically isolated
    Details

  • Motrona PP210: Signal Converter Transonic >>> Parallel

    Features

    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • SSI input in the format DATA +, DATA-, CLOCK +, CLOCK- up to 32 bits
    • 3 control inputs (hold) for PNP signals [10 ... 30 VDC]
    • Pulse inputs A, B [HTL], A, / A, B, / B [RS422, HTL]
    • Input frequency up to 1 MHz
    • 25-bit parallel output push-pull in BCD, binary or Gray code format
    • Power supply 18 ... 30 VDC
    • Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
    Details

  • Motrona PR210: Signal Converter Parallel >>> Serial RS232 / RS485

    Features

    • 20-bit parallel input  with format  BCD, binary or Gray-Code
    • Input frequency: fast encoder 5 kHz, auto-transmit / data logging 0.5 kHz
    • 4 status outputs, with push-pull characteristics, short-circuit-proof  [5 ... 30 VDC]
    • Power supply 10 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Serial RS232 / RS485 interface
    Details

  • Motrona PU202: Level Converter HTL >>> TTL / RS422

    Features

    • Pulse input with format A, B, Z [HTL] (10 ... 30 V)
    • Input frequency max. 200 kHz
    • Pulse output with format A, /A, B, /B, Z, /Z [RS422 / TTL]
    • Power supply 5 VDC
    • Converts HTL levels (A / B / Z) in TTL / RS422, incl. the inverted signals
    • Converts also static/separate directional information into a dual channel A / B signal with a 90° phase shift
    • Open print version with plastic snap-on housing for top-hat rail (according to EN 60715)
    Details

  • Motrona PU204: Level Converter TTL / RS422 >>> HTL

    Features

    • Pulse input with format A, /A, B, /B, Z, /Z [TTL / RS422]
    • Input frequency max. 200 kHz
    • Pulse output with format A, B, Z [HTL]
    • Power supply 10 ... 30 VDC
    • Converts TTL / RS422 signals (A, /A, B, /B, Z, /Z) in  HTL format with an output level of 10 ... 30 VDC
    • Generates additionally an A / B directional information with 90° phase shift‚ a static HIGH / LOW directional signal or separate directional pulses
    • Open print version with plastic snap-on housing for top-hat rail (according to EN 60715)
    Details

  • Motrona PU210: Universal Level Converter and Direction Decoder

    Features

    • 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
    • Input frequency up to 500 kHz
    • 1 pulse output with format A, /A, B, /B, Z, /Z [RS422, HTL]
    • Power supply 5 ... 30 VDC
    • Potential separation between input and output
    • Possibility to convert A, B / 90 ° directional information into static directional signal and vice versa
    • Connections on the input as well as on the output either via sub-D plugs or plug-in screw terminals (parallel connections)
    • Snap-on housing for top-hat rail (according to EN 60715)
    Details

  • Motrona PV210: Signal Converter Transonic >>> Analog / Serial RS232/RS485

    Features

    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • Adjustable frequency of the init pulses from 62.5 Hz to 5 kHz
    • Analog output ± 10 V, 0/4 ... 20 mA, 16 bit
    • Power supply 18 ... 30 VDC
    • Compact housing for mounting on a 35 mm top-hat rail (according to EN 60715)
    • Simple parameterization via the OS6.0 user interface
    • Serial RS232 / RS485 interface
    • Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
    • SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
    • USB interface and RS232/RS485 interface for configuration and serial readout
    Details

  • Motrona SI220: SinCos Interpolator with Incremental Output (HTL / RS422)

    Features

    • Encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
    • Control input „Error Release“ for PNP signals [10 ... 30 VDC]
    • Input frequency up to 400 kHz
    • Pulse output with format A, /A, B, /B, Z, /Z [RS422] or with format A, B, 90° [HTL]
    • Output frequency up to 4 MHz [RS422]
    • Control output „Error“ with push-pull characteristic, short-circuit-proof, [5 ... 30 VDC]
    • Power supply 18 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Adjustable multiplier for interpolation rates from 1:5 to 1:50
    • Adjustable divider 1:1 – 1:255 to reduce the output frequency
    Details

  • Motrona SI251: SinCos Interpolator with Incremental Output (HTL / RS422)

    Features

    • Encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
    • Control input „Error Release“ for PNP signals [10 ... 30 VDC]
    • Input frequency up to 400 kHz
    • Pulse output with format A, /A, B, /B, Z, /Z [RS422]
    • Pulse output with format A, B, 90° [HTL]
    • Output frequency up to 100 kHz [HTL], up to 4 MHz [RS422]
    • Control output „Error“ with push-pull characteristic, short-circuit-proof, [5 ... 30 VDC]
    • Power supply 18 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Adjustable multiplier for interpolation rates from 1:5 to 1:50
    • Adjustable divider 1:1 – 1:128 to reduce the output frequency
    Details

  • Motrona SV210: Signal Converter SinCos >>> Incremental / SinCos Splitter

    Features

    • 1 encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
    • Maximum sinus input frequency 500 kHz with max. 200 ns conversion time
    • 2 signal outputs with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
    • 2 pulse outputs with format A, /A, B, /B, Z, /Z [RS422, TTL, HTL]
    • Power supply 17 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    Details

  • Motrona SV211: Sine-Cosine Signal Splitter for 4 SinCos Outputs

    Features

    • 1 encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
    • Maximum sinus input frequency 500 kHz with max. 200 ns conversion time
    • 4 signal outputs with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
    • Power supply 17 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    Details

  • Motrona UZ210: Encoder Simulator/ Frequency Generator

    Features

    • Scalable 14 bit analog input  for ±10 V or 0/4 ... 20 mA
    • 4 control inputs for PNP signals [10 ... 30 VDC]
    • Pulse output with format  A, B, 90° [HTL] or A, /A, B, /B, Z, /Z [RS422]
    • SSI output with format  DATA+, DATA-, CLOCK+, CLOCK- up to 25 bit
    • Power supply 12 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Various user modes: Programmable V / f characteristics,  programmable curves with optionally repeating curve cycles, additional control functions similar to a “motorized potentiometer”
    • USB, RS232 and RS485 interface for programming and serial readout of the conversion result and other internal registers
    • Adjustable filter functions as well as operator programmable linearization curves
    • Printer mode for automatic data transfer of internal registers to a data logger or PC
    Details

  • Motrona ZP210: Signal Converter Incremental >>> Parallel

    Features

    • Pulse inputs A, B [HTL], A, / A, B, / B [RS422, HTL]
    • SSI input in the format DATA +, DATA-, CLOCK +, CLOCK- up to 32 bits
    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • 3 control inputs (hold) for PNP signals [10 ... 30 VDC]
    • Input frequency up to 1 MHz
    • 25-bit parallel output push-pull in BCD, binary or Gray code format
    • Power supply 18 ... 30 VDC
    • Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
    Details

  • Motrona ZU210: Signal Converter Incremental >>> Analog / Serial RS232/RS485

    Features

    • Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
    • Input frequency up to 1 MHz [RS422], 200 kHz [HTL]
    • Analog output ±10 V or 0/4 ... 20 mA, 16 Bit
    • Power supply 18 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Setup via operator software OS6.0
    • Serial RS232- / RS485 interface
    • SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • USB interface and RS232/RS485 interface for configuration and serial readout
    Details
  • AU6802N1 Resolver / Digital converters (Smartcoder)

    Tamagawa Seiki AU6802N1 Digital converters (Smartcoder)

    Features

    • Adopts R/D conversion based on a proven digital tracking system.
    • Low cost, small size and lightweight.
    • Abnormality detection - Capable of detecting abnormal resolver signals, breaking of resolver signals, abnormal R/D conversion and abnormally high temperature of a IC
    • Built-in self-test - Conducts a self-test on R/D conversion and abnormality detection・Realization of system/cost reduction based on all-in-one concepts
    • Integrated with an excitation amplifier (Output current: 1 OmA rms/20mA rms)
    • Integrated with an operation clock
    • Enhancement of functions corresponding to various applications
    • Requires no phase adjustment to excitation signals (Allowable range: Within土45゜）
    • Variable setting of controlling bandwidth (fBW) (Selectable from 7 types of fixed values or automatic adjustment)
    • Capable of digital conversion of linear hall IC signals and R/D parallel connections to resolvers
    • Output redundancy (Triple redundancy-Parallel/Pulse/Serial output)
    Details
  • AU6803

    Tamagawa Seiki AU6803 Resolver / Digital converters (Smartcoder)

    Features

    • Compact size, Lightweight, Low cost
    • Package area :1/2 (compared to AU6802N1)
    • Advanced failure check functions
    • Enhanced error detection functions (Square sum, Wire cut, PLL unlock, Over-temp)
    • BIST Built-ln Self Test functions
    • Excitation Amp (currency controlled) incorporated
    • All-in-one concept to reduce total system cost
    • Can handle Sine/Cosine DC resolver signals
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top