+44 (0)1903 788287
Filtered (35)
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15H Blind Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15T Through Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Features

    • 5mm Opto-ASIC encoder with a low profile (50.8mm)
    • Imperial bore sizes range from 0.625” to 1.125”
    • Metric bore sizes ranging from 6 mm to 28 mm
    • Single replacement solution for 50.8mm to 88.9mm encoders
    • Resolutions to 10,000 PPR, frequencies to 1 MHz
    • Versatile flexible mounting options
    • RoHS compliant
    • Corrosion-Resistant Option
    Details
  • Encoder Technology 260 Through hollow shaft Incremental encoder

    Encoder Technology 260 Through Hollow Shaft Incremental Encoder

    Features

    • Low profile 30.3mm
    • Up to 12 pole commutation
    • Thru-bore and hollow-bore (blind) styles
    • Simple, innovative flexible mounting system
    • Incorporates Opto-ASIC technology
    Details
  • Encoder Technology 75HA Through HolIow Shaft Incremental Encoder

    Encoder Technology 75HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 2Ncm (typical)
    • Inertia: 100gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 75HS-Hollow shaft incremental Encoder

    Encoder Technology 75HS Through Hollow Shaft Incremental Encoder

    Features

    • Body: Stainless Steel (316)
    • Cover: Stainless Steel (316)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing + Single lip seal
    • Rear: Single lip seal on the rear of the cover
    • Protection: (IP66 / IP67)
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM
    • Torque: 4Ncm (typical)
    • Inertia: 200gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Features

    • Size 25 / 63.5mm Diameter (Hollow Shaft)
    • Up to 12 Pole Commutation Available
    • Thru Bore and Blind Bore Options
    • Simple, Innovative Flexible Mounting System
    • Incorporates Opto-ASIC Technology
     
    Details
  • Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Features

    • Thru-bore design for easy mounting
    • Bore options to 1.375" and 32mm
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • 100° C operating temperature available
    Details
  • Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Features

    • Slim profile—only 34.5mm in depth
    • Thru-bore design for easy mounting
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • Bore options to 1.875" and 43mm
    Details
  • Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing
    • Rear: Single lip seal on the rear of the cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 3Ncm (typical)
    • Inertia: 600gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology A102H Large Bore Encoder

    Encoder Technology A102H Large Bore Through Hollow Shaft Encoder

    Features

    • Number of output pulses per revolution 5.000 - 500.000 ppr
    • Line number on disc (z) 5.000
    • Maximum shaft speed 8000 rpm
    • The permissible motion of the shaft - axial: ± 1.00 mm - radial: 0.02 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
    • Starting torque at 20°C ≤ 0.01 Nm
    • Rotor moment of inertia < 20x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.8 kg
    • Operating temperature -20...+70°C
    • Storage temperature -30...+85°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (11 ms) ≤ 300m/s²
    Details
  • Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Features

    • Number of output pulses per revolution 100-108000 ppr
    • Maximum shaft speed 10000 rpm
    • The permissible motion of the shaft - axial: ± 0.5 mm - radial: ± 0.05 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
    • Starting torque at 20°C ≤ 0.025 Nm
    • Rotor moment of inertia < 1.5x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.3 kg
    • Operating temperature -10...+70°C
    • Storage temperature -30...+80°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (5 ms) ≤ 1000 m/s²
    Details

  • Motrona BY701-Firmware: Synchronization of Drives

    Features

    • MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
    • The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
    • Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
    • The number of successive axes can be extended arbitrarily via a cascading output.
    • MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
    • PROFIBUS connection possible via gateway PB251 (see accessories)
    Details
  • motrona-DZ210

    Motrona DZ210: Direction and Standstill Monitor

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 500 kHz
    • 2 output relays with potential-free change-over contact (forward, reward and zero motion)
    • 2 transistor outputs with High-Side-Driver, short-circuit-proof
    • Power supply 17 ... 30 VDC
    • Snap-on housing for top hat rail (according to EN 60715)
    • DIL switch for setup of input characteristic and definition of standstill
    Details

  • Motrona DZ260: Speed Monitor with 3 Output Relays and Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • 14 Bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ261: Speed Monitor with 3 Transistor Outputs and Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 fast transistor switching outputs [PNP]
    • 14 bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ266: Speed Monitor with Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 14 bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ267: Speed Monitor with 3 Output Relays

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ269: Speed Monitor with 3 Output Relays

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona ET224: Expansion Module for GV series with Potential Separation, 4 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 4 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 34 x 118 x 140 mm (1,34 x 4,65 x 5,51")
    Details

  • Motrona ET228: Expansion Module for GV series with Potential Separation, 8 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 8 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 54 x 118 x 140 mm (2,13 x 4,65 x 5,51")
    Details

  • Motrona EV224: Expansion Module for GV series without Potential Separation, 4 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 4 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 34 x 118 x 140 mm (1,34 x 4,65 x 5,51")
    Details

  • Motrona EV228: Expansion Module for GV series without Potential Separation, 8 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 8 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 54 x 118 x 140 mm (2,13 x 4,65 x 5,51")
    Details

  • Motrona GS202: Encoder-Switch

    Features

    • 2 x 6 control outputs für HTL / PNP signals
    • Pulse inputs with format A, /A, B, /B, Z, /Z [RS422]
    • Input frequency up to 1 MHz
    • 2 encoder outputs, short-circuit-proof [TTL / RS422]
    • Power supply 12 ... 30 VDC
    • Current consumption (unloaded) 30 mA
    • Encoder supply 5 ... 35 VDC (extern connect to +VAUX)
    • Operation temperature: 0 ... 60 °C (32 ... 140°F)
    • Latency time < 250ns
    • Channel switching  < 1 ms
    • Open plastic housing for top-hat rail (according to EN 60715)
    • LEDs for indication of the input pulses
    Details

  • Motrona GT222: Signal Distributor for Incremental Encoder with Potential Separation, 2 Outputs

    Features

    • 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 2 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy expansion of the number of outputs
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 34 x 118 x 140 mm (1,34 x 4,65 x 5,51")
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top