Skip to content
[email protected]
+44 (0)1903 788287
We offer same day delivery to the UK
and next day delivery to USA and Europe
Enquire Now
Home
Manufacturers
Deva Electronic Controls
Encoder Technology
Heidenhain
Motrona
MTL
Nemicon
Posital Fraba
Tamagawa Seiki
TWK
Products
Encoders
Absolute Encoders
Single Turn Hollow Shaft Encoders
Single Turn Standard Shaft
Multi Turn Hollow Shaft Encoders
Multi Turn Standard Shaft Encoders
Incremental Encoders
Angle Encoders
Blind Hollow Shaft Encoders
Linear Encoders
Linear Scales
Stainless Steel Encoders
Standard Shaft Encoders
Through Hollow Shaft Encoders
Special Designs
Resolvers
Tamagawa Seiki + Resolvers
Accessories
Converters/Interfaces
Counters
Indicators
Stocklist
Case Studies
Contact us
Search for:
Home
Manufacturers
Deva Electronic Controls
Encoder Technology
Heidenhain
Motrona
MTL
Nemicon
Posital Fraba
Tamagawa Seiki
TWK
Products
Encoders
Absolute Encoders
Single Turn Hollow Shaft Encoders
Single Turn Standard Shaft
Multi Turn Hollow Shaft Encoders
Multi Turn Standard Shaft Encoders
Incremental Encoders
Angle Encoders
Blind Hollow Shaft Encoders
Linear Encoders
Linear Scales
Stainless Steel Encoders
Standard Shaft Encoders
Through Hollow Shaft Encoders
Special Designs
Resolvers
Tamagawa Seiki + Resolvers
Accessories
Converters/Interfaces
Counters
Indicators
Stocklist
Case Studies
Contact us
Search for:
Reset all
×
Fiber Optic (HTL, TTL, SSI)
×
Fieldbus Indicators
×
Filtered (11)
Motrona CA306: Simple Preset Unit for CAN-Bus
Features
Power supply 10 ... 30 VDC
Compact norm panel housing
Preset range: 6 digits or 5 digits with sign
DIL-switch for set up of the transmission parameters
Dimension H x B x T = 96 x 48 x 140 mm (3.78 x 1.89 x 5.51 ")
Details
Motrona CA340: Fieldbus Indicator for CAN-Bus (SDO and PDO)
Features
Power supply 10 ... 30 VDC
Compact norm panel housing
6 digits LED display with 15 mm height
Display range -199999 ... 999999
DIL-switch for setup of the transmission parameters
Dimension H x B x T = 96 x 48 x 140 mm (3.78 x 1.89 x 5.12 ")
Details
Motrona EC350: touchMATRIX® EtherCAT Indicator
Features
EtherCAT interface
3 control inputs for remote release
Power supply 18 ... 30 VDC
Norm panel housing with 96 x 48 mm and protection class IP65
Bright and high-contrast graphic display with event-dependent color variants
Emulation of a 7-segment display with symbols, units and bargraph
Intuitive and simple parameterization through plain text and touchscreen
Details
Motrona EN350: touchMATRIX® EtherNET/IP Indicator
Features
EtherNET/IP interface
3 control inputs for remote release
Power supply 18 ... 30 VDC
Norm panel housing with 96 x 48 mm and protection class IP65
Bright and high-contrast graphic display with event-dependent color variants
Emulation of a 7-segment display with symbols, units and bargraph
Intuitive and simple parameterization through plain text and touchscreen
Details
Motrona LW213: Fiber Optic (Send-)Module for RS422 / HTL Signals (3000 m)
Features
4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single-channel
4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
Maximum input frequency 1 MHz
Very short conversion time < 300 ns
Optical wavelength 1300 nm
Transmission distance up to 3000 meters
Power supply 5 VDC (for LW213)
Power supply 10 ... 30 VDC (for LW213-1, LW213-2, LW213-3)
Snap-on housing for top-hat rail (according to EN 60715)
Pre-configured optical fibres are available
Details
Motrona LW214: Optical Fiber (Receiver-) Module with Incremental Output
Features
4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single channel
4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
Maximum input frequency 1 MHz
Very short conversion time < 300 ns
Optical wavelength 1300 nm
Transmission distances up to 3000 meters
Power supply 5 VDC (for LW214)
Power supply 10 ... 30 VDC (for LW214-1, LW214-2)
Snap-on housing for top-hat rail (according to EN 60715)
Pre-configured optical fibers are available
Details
Motrona LW215: Optical Fiber (Send-) Module for RS422 / HTL Signals (up to 2000 m)
Features
4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single channel
4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
Maximum input frequency 1 MHz
Very short conversion time < 300 ns
Optical wavelength 850 nm
Transmission distance up to 2000 meters
Power supply 5 VDC (for LW215)
Power supply 10 ... 30 VDC (for LW215-1, LW215-2, LW216-3)
Snap-on housing for top-hat rail (according to EN 60715)
Pre-configured optical fibers are available
Details
Motrona LW216: Optical Fiber (Receiver-)Module with Incremental Output
Features
4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single channel
4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
Maximum input frequency 1 MHz
Very short conversion time < 300 ns
Optical wavelength 850 nm
Transmission distance up to 2000 meters
Power supply 5 VDC (for LW216)
Power supply 10 ... 30 VDC (for LW216-1, LW216-2)
Snap-on housing for top-hat rail (according to EN 60715)
Pre-configured optical fibers are available
Details
Motrona LW217: Optical Fiber Send-Module for SSI Absolute Encoder
Features
1 SSI input / output channel [RS422] with format DATA+, DATA-, CLOCK+, CLOCK-
1 Error input (LW217) resp. 1 open-drain-output (LW218)
Maximum input frequency 1 MHz
Very short conversion time < 300 nsec.
Optical wavelength 850 nm
Transmission distance up to 2000 meters
Power supply 5 VDC (for LW217)
Power supply 10 ... 30 VDC (for LW217-1)
Free adjustable SSI resolution from 1 ... 99 bit
Snap-on housing for top-hat rail (according to EN 60715)
Pre-configured optical fibres are available
Details
Motrona LW218: Optical Fibre (Receive-) Module for SSI-Signals
Features
1 SSI input / output channel [RS422] with format DATA+, DATA-, CLOCK+, CLOCK-
1 open-drain-output (LW218)
Maximum input frequency 1 MHz
Very short conversion time < 300 ns
Optical wavelength 1300 nm
Transmission distance up to 2000 meters
Power supply 5 VDC (for LW218)
Power supply 10 ... 30 VDC (for LW218-1)
Free adjustable SSI resolution from 1 ... 99 bit
Snap-on housing for top-hat rail (according to EN 60715)
Glass fibre cables are available ready-assembled
Details
Motrona PN350: touchMATRIX® Profinet Indicator
Features
Profinet interface
3 control inputs for remote release
Power supply 18 ... 30 VDC
Norm panel housing with 96 x 48 mm and protection class IP65
Bright and high-contrast graphic display with event-dependent color variants
Emulation of a 7-segment display with symbols and units
Intuitive and simple parameterization through plain text and touchscreen
Details
Close product quick view
×
Title
Page load link
Go to Top