Skip to content
[email protected]
+44 (0)1903 788287
We offer same day delivery to the UK
and next day delivery to USA and Europe
Enquire Now
Home
Manufacturers
Deva Electronic Controls
Encoder Technology
Heidenhain
Motrona
MTL
Nemicon
Posital Fraba
Tamagawa Seiki
TWK
Products
Encoders
Absolute Encoders
Single Turn Hollow Shaft Encoders
Single Turn Standard Shaft
Multi Turn Hollow Shaft Encoders
Multi Turn Standard Shaft Encoders
Incremental Encoders
Angle Encoders
Blind Hollow Shaft Encoders
Linear Encoders
Linear Scales
Stainless Steel Encoders
Standard Shaft Encoders
Through Hollow Shaft Encoders
Special Designs
Resolvers
Tamagawa Seiki + Resolvers
Accessories
Converters/Interfaces
Counters
Indicators
Stocklist
Case Studies
Contact us
Search for:
Home
Manufacturers
Deva Electronic Controls
Encoder Technology
Heidenhain
Motrona
MTL
Nemicon
Posital Fraba
Tamagawa Seiki
TWK
Products
Encoders
Absolute Encoders
Single Turn Hollow Shaft Encoders
Single Turn Standard Shaft
Multi Turn Hollow Shaft Encoders
Multi Turn Standard Shaft Encoders
Incremental Encoders
Angle Encoders
Blind Hollow Shaft Encoders
Linear Encoders
Linear Scales
Stainless Steel Encoders
Standard Shaft Encoders
Through Hollow Shaft Encoders
Special Designs
Resolvers
Tamagawa Seiki + Resolvers
Accessories
Converters/Interfaces
Counters
Indicators
Stocklist
Case Studies
Contact us
Search for:
Reset all
×
With Frequency-Input (HTL, TTL)
×
Speed Monitors
×
Sub-D-Connectors (without cable)
×
Filtered (13)
Motrona DB009: Sub-D-connector 9-position (female)
Features
Solder connection
Metallised plastic enclosure
Mounting screws included
Details
Motrona DB025: Sub-D-Connector 25-position (female)
Features
Solder connection
Metallised plastic enclosure
Mounting screws included
Details
Motrona DS009: Sub-D-connector 9-position (male)
Features
Solder connection
Metallised plastic enclosure
Mounting screws included
Details
Motrona DS025: Sub-D-Connector 25-position (male)
Features
Solder connection
Metallised plastic enclosure
Mounting screws included
Details
Motrona DZ210: Direction and Standstill Monitor
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 500 kHz
2 output relays with potential-free change-over contact (forward, reward and zero motion)
2 transistor outputs with High-Side-Driver, short-circuit-proof
Power supply 17 ... 30 VDC
Snap-on housing for top hat rail (according to EN 60715)
DIL switch for setup of input characteristic and definition of standstill
Details
Motrona DZ260: Speed Monitor with 3 Output Relays and Analog Output
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 1 MHz
3 output relays
14 Bit analog output for ±10 V or 0/4 ... 20 mA
Power supply 17 ... 30 VDC
Auxiliary voltage output +5 V for the supply of TTL encoders
Snap-on housing for top hat rail (according to EN 60715)
LCD display, backlighted
Setup via keys or via PC by serial RS232 interface
Details
Motrona DZ261: Speed Monitor with 3 Transistor Outputs and Analog Output
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 1 MHz
3 fast transistor switching outputs [PNP]
14 bit analog output for ±10 V or 0/4 ... 20 mA
Power supply 17 ... 30 VDC
Auxiliary voltage output +5 V for the supply of TTL encoders
Snap-on housing for top hat rail (according to EN 60715)
LCD display, backlighted
Setup via keys or via PC by serial RS232 interface
Details
Motrona DZ266: Speed Monitor with Analog Output
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 1 MHz
14 bit analog output for ±10 V or 0/4 ... 20 mA
Power supply 17 ... 30 VDC
Auxiliary voltage output +5 V for the supply of TTL encoders
Snap-on housing for top hat rail (according to EN 60715)
LCD display, backlighted
Setup via keys or via PC by serial RS232 interface
Details
Motrona DZ267: Speed Monitor with 3 Output Relays
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 1 MHz
3 output relays
Power supply 17 ... 30 VDC
Auxiliary voltage output +5 V for the supply of TTL encoders
Snap-on housing for top hat rail (according to EN 60715)
LCD display, backlighted
Setup via keys or via PC by serial RS232 interface
Details
Motrona DZ269: Speed Monitor with 3 Output Relays
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 1 MHz
3 output relays
Power supply 17 ... 30 VDC
Auxiliary voltage output +5 V for the supply of TTL encoders
Snap-on housing for top hat rail (according to EN 60715)
LCD display, backlighted
Setup via keys or via PC by serial RS232 interface
Details
Motrona FP210: Signal Converter Frequency >>> Parallel
Features
Frequency inputs A, B [HTL], A, / A, B, / B [RS422, HTL]
3 control inputs (hold) for PNP signals [10 ... 30 VDC]
SSI input in the format DATA +, DATA-, CLOCK +, CLOCK- up to 32 bits
Start-stop interface for absolute transducers and magnetostrictive sensors
Input frequency up to 1 MHz
25-bit parallel output push-pull in BCD, binary or Gray code format
Power supply 18 ... 30 VDC
Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
Details
Motrona FU210: Signal Converter Frequency >>> Analog / Serial RS232/RS485
Features
Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
Input frequency up to 1 MHz [RS422], 200 kHz [HTL]
Analog output ±10 V or 0/4 ... 20 mA, 16 Bit
Power supply 18 ... 30 VDC
Snap-on housing for top-hat rail (according to EN 60715)
Setup via operator software OS6.0
Serial RS232- / RS485 interface
SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
Start-stop interface for absolute transducers and magnetostrictive sensors
USB interface and RS232/RS485 interface for configuration and serial readout
Details
Motrona IO222: Signal Converter Incremental >>> IO-Link
Features
1 incremental input (A, /A, B, /B)
for HTL/TTL/RS422 for NPN/PNP/NAMUR encoders and sensors
optionally 3 control inputs for PNP signals [10 ... 30 VDC]
IO link interface
Power supply 12 ... 30 VDC
Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
Details
Close product quick view
×
Title
Page load link
Go to Top