+44 (0)1903 788287
Filtered (22)

  • Motrona BY701-Firmware: Synchronization of Drives

    Features

    • MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
    • The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
    • Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
    • The number of successive axes can be extended arbitrarily via a cascading output.
    • MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
    • PROFIBUS connection possible via gateway PB251 (see accessories)
    Details

  • Motrona CI800: CANopen Interface Module

    Features

    • Internal power supply 3,3 V
    • Ambient temperature 0° C ... +60° C / 32° F ... 140° F (operating), -40° C ... +70° C / -40° F ... 158° F (storage)
    • 10, 20, 50, 100, 125, 250, 500, 800 und 1000 kbps Baud rates
    • SUB-D-9-pin male, galvanically isolated
    Details

  • Motrona CK232: Connectivity Kit USB / RS232

    Features

    • USB to RS232 converter (compatible with all existing Windows versions)
    • Serial RS232 cable (for connection between the converter and motrona unit)
    • One connector Sub-D-9 (male)
    • One connector Sub-D-9 (female)
    • Length 3 m (approx. 10 feet)
    • Windows driver CD enclosed
    Details

  • Motrona DB009: Sub-D-connector 9-position (female)

    Features

    • Solder connection
    • Metallised plastic enclosure
    • Mounting screws included
    Details

  • Motrona DB025: Sub-D-Connector 25-position (female)

    Features

    • Solder connection
    • Metallised plastic enclosure
    • Mounting screws included
    Details

  • Motrona DS009: Sub-D-connector 9-position (male)

    Features

    • Solder connection
    • Metallised plastic enclosure
    • Mounting screws included
    Details

  • Motrona DS025: Sub-D-Connector 25-position (male)

    Features

    • Solder connection
    • Metallised plastic enclosure
    • Mounting screws included
    Details

  • Motrona FK470: Ribbon cable

    Features

    • Sub-D-9 connectors (male) on both sides
    • cable length 10 cm (approx. 3.4")
    Details

  • Motrona GV210: Dual Level Converter for HTL and RS422 / TTL

    Features

    • 2 pulse inputs with format  A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
    • Input frequency up to 250 kHz for asymmetrical and up to 1 MHz for symmetric signals
    • 2 control inputs for HTL / PNP signals [10 ... 30 VDC]
    • 2 output channels with format  A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422], each output adjustable separately
    • Power supply 12 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    Details

  • Motrona IO220: Signal Converter Analog >>> IO-Link

    Features

    • 4 analog inputs for ±10 V or 0/4 ... 20 mA (2x current / 2x voltage)
    • optionally 3 control inputs for PNP signals [10 ... 30 VDC]
    • IO link interface
    • Power supply 12 ... 30 VDC
    • Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
    Details

  • Motrona IT210: Level Converter, Directional Decoder and programmable Pulse Divider

    Features

    • Pulse input in format A, /A, B, /B, Z, /Z [RS422, HTL]
    • Pulse input in format A, B, Z [HTL]
    • Input frequency up to 1 MHz
    • Pulse output in format A, /A, B, /B, Z, /Z [RS422, HTL]
    • Pulse output in format A, B, Z [HTL]
    • Power supply 9 ... 30 VDC
    • Settings via DIL switches
    • Level conversion (RS422, HTL single-ended, HTL differential, TTL and vice versa)
    • Division of two-track A / B pulses with adjustable ratio 1: 1 to 1: 4096
    • Division of the Z pulse with adjustable ratio 1: 1 to 1: 256
    • External HTL signals for various functions
    • Implementation between the two types of representations for the direction of rotation (A / B 90 °, A/B Dir and vice versa, Division possible)
    • Snap-on housing for top-hat rail (acc. EN 60715)
    • Dimension (B x H X T) 22,5 x 102 x 102 mm
    Details

  • Motrona LW213: Fiber Optic (Send-)Module for RS422 / HTL Signals (3000 m)

    Features

    • 4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single-channel
    • 4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
    • Maximum input frequency 1 MHz
    • Very short conversion time < 300 ns
    • Optical wavelength 1300 nm
    • Transmission distance up to 3000 meters
    • Power supply 5 VDC (for LW213)
    • Power supply 10 ... 30 VDC (for LW213-1, LW213-2, LW213-3)
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Pre-configured optical fibres are available
    Details

  • Motrona PB800: Profibus DPV1 Interface Module

    Features

    • Internal power supply 3,3 V
    • Ambient temperature 0° C ... +60° C / 32° F ... 140° F (operating), -40° C ... +70° C / -40 ... 158° F (storage)
    • 9600 Bit/s ... 12 MBit/s Baud rates
    • SUB-D-9-pin female, galvanically isolated
    Details

  • Motrona PN800: Profinet Interface Modul

    Features

    • Internal power supply 3,3 V
    • Ambient temperature 0° C ... +60° C (operating), -40° C ... +70° C (storage)
    • 100 MBit/s Vollduplex
    • 2 Ethernet-Ports RJ45 with integrated switch, galvanically isolated
    Details

  • Motrona PU202: Level Converter HTL >>> TTL / RS422

    Features

    • Pulse input with format A, B, Z [HTL] (10 ... 30 V)
    • Input frequency max. 200 kHz
    • Pulse output with format A, /A, B, /B, Z, /Z [RS422 / TTL]
    • Power supply 5 VDC
    • Converts HTL levels (A / B / Z) in TTL / RS422, incl. the inverted signals
    • Converts also static/separate directional information into a dual channel A / B signal with a 90° phase shift
    • Open print version with plastic snap-on housing for top-hat rail (according to EN 60715)
    Details

  • Motrona PU204: Level Converter TTL / RS422 >>> HTL

    Features

    • Pulse input with format A, /A, B, /B, Z, /Z [TTL / RS422]
    • Input frequency max. 200 kHz
    • Pulse output with format A, B, Z [HTL]
    • Power supply 10 ... 30 VDC
    • Converts TTL / RS422 signals (A, /A, B, /B, Z, /Z) in  HTL format with an output level of 10 ... 30 VDC
    • Generates additionally an A / B directional information with 90° phase shift‚ a static HIGH / LOW directional signal or separate directional pulses
    • Open print version with plastic snap-on housing for top-hat rail (according to EN 60715)
    Details

  • Motrona PU210: Universal Level Converter and Direction Decoder

    Features

    • 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
    • Input frequency up to 500 kHz
    • 1 pulse output with format A, /A, B, /B, Z, /Z [RS422, HTL]
    • Power supply 5 ... 30 VDC
    • Potential separation between input and output
    • Possibility to convert A, B / 90 ° directional information into static directional signal and vice versa
    • Connections on the input as well as on the output either via sub-D plugs or plug-in screw terminals (parallel connections)
    • Snap-on housing for top-hat rail (according to EN 60715)
    Details

  • Motrona SK232: RS232 cable

    Features

    • 1 connector Sub-D-9 (male)
    • 1 connector Sub-D-9 (female)
    • cable length 3 m (approx. 10 feet)
     
    Details

  • Motrona SV211: Sine-Cosine Signal Splitter for 4 SinCos Outputs

    Features

    • 1 encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
    • Maximum sinus input frequency 500 kHz with max. 200 ns conversion time
    • 4 signal outputs with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
    • Power supply 17 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    Details

  • Motrona USBAA: USB 2.0 cable

    Features

    • USB cable for connection between PC and the Motrona unit UZ210
    • Both connectors are type A
    • Cable length 2 m (approx. 6.5 feet)
    Details

  • Motrona USBAB: USB cable for motrona DS series

    Features

    • USB cable for connection between PC operator software and Motrona DS device
    • USB connector type A on type B
    • Length 1,8 m
    Details

  • Motrona USBAMiniB: USB 2.0 cable

    Features

    • USB cable for connection between PC and Motrona devices of the series IV/FU/PV/ZU210 and IP/FP/PP/ZP210
    • USB connector type A on type Mini B
    • Length 1,8 m
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top