+44 (0)1903 788287
Filtered (21)

  • Motrona CI800: CANopen Interface Module

    Features

    • Internal power supply 3,3 V
    • Ambient temperature 0° C ... +60° C / 32° F ... 140° F (operating), -40° C ... +70° C / -40° F ... 158° F (storage)
    • 10, 20, 50, 100, 125, 250, 500, 800 und 1000 kbps Baud rates
    • SUB-D-9-pin male, galvanically isolated
    Details

  • Motrona CK232: Connectivity Kit USB / RS232

    Features

    • USB to RS232 converter (compatible with all existing Windows versions)
    • Serial RS232 cable (for connection between the converter and motrona unit)
    • One connector Sub-D-9 (male)
    • One connector Sub-D-9 (female)
    • Length 3 m (approx. 10 feet)
    • Windows driver CD enclosed
    Details

  • Motrona DB009: Sub-D-connector 9-position (female)

    Features

    • Solder connection
    • Metallised plastic enclosure
    • Mounting screws included
    Details

  • Motrona DB025: Sub-D-Connector 25-position (female)

    Features

    • Solder connection
    • Metallised plastic enclosure
    • Mounting screws included
    Details

  • Motrona DS009: Sub-D-connector 9-position (male)

    Features

    • Solder connection
    • Metallised plastic enclosure
    • Mounting screws included
    Details

  • Motrona DS025: Sub-D-Connector 25-position (male)

    Features

    • Solder connection
    • Metallised plastic enclosure
    • Mounting screws included
    Details

  • Motrona FK470: Ribbon cable

    Features

    • Sub-D-9 connectors (male) on both sides
    • cable length 10 cm (approx. 3.4")
    Details

  • Motrona GI210: Switch between 2 SSI Encoders and a target device

    Features

    • Control input with format [HTL]
    • 2 SSI inputs with format [RS422]
    • Cutt-off frequency 100 kHz ... 1 MHz
    • 2 encoder inputs, short-circuit-proof
    • 1 SSI output with format [RS422]
    • Power supply 12 ... 30 V DC
    • Current consumption (unloaded) 50 mA
    • Encoder supply 2 x 125mA (Vin – 2 V) short-circuit-proof
    • Delay / Output / Input100 ns
    • Operation temperature : 0 ... 45 °C (32 ... 113 °F)
    • SSI pause time min. 25 ns
    • Switching time is synchronized automatically with the next SSI break
    • Cascadable for more SSI encoders
    • All connections via pluggable screw terminal block
    • Snap-on housing for top-hat rail (according to EN 60715)
    • LEDs for indication of the input pulses
    • Dimension W x H x D = 22,5 x 121 x 112 mm (8.86 x 47.64 x 44.09'')
    • Plastic housing incl. plug
    Details

  • Motrona IO220: Signal Converter Analog >>> IO-Link

    Features

    • 4 analog inputs for ±10 V or 0/4 ... 20 mA (2x current / 2x voltage)
    • optionally 3 control inputs for PNP signals [10 ... 30 VDC]
    • IO link interface
    • Power supply 12 ... 30 VDC
    • Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
    Details

  • Motrona IO223: Signal Converter SSI >>> IO-Link

    Features

    • 1 SSI input (10 … 32 bit)
    • for single-turn and multiturn encoders
    • optionally 3 control inputs for PNP signals [10 ... 30 VDC]
    • IO link interface
    • Power supply 12 ... 30 VDC
    • Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
    Details

  • Motrona IP210: Signal Converter SSI >>> Parallel

    Features

    • SSI input  with format DATA+, DATA-, CLOCK+, CLOCK- up to 32 Bit
    • Impulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
    • 3 control inputs (Hold) for PNP signals [10 ... 30 VDC]
    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • Input frequency up to 1 MHz
    • 25-bit parallel output push-pull in BCD, binary or Gray code format
    • Power supply 18 ... 30 VDC
    • Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
    Details

  • Motrona IV210: Signal Converter SSI >>> Analog / Serial RS232/RS485

    Features

    • SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
    • SSI clock frequency up to 1 MHz
    • Analog output ±10 V or 0/4 ... 20 mA, 16 Bit
    • Power supply 18 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Setup via operator software OS6.0
    • Serial RS232- / RS485 interface
    • Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • USB interface and RS232/RS485 interface for configuration and serial readout
    Details

  • Motrona LW213: Fiber Optic (Send-)Module for RS422 / HTL Signals (3000 m)

    Features

    • 4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single-channel
    • 4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
    • Maximum input frequency 1 MHz
    • Very short conversion time < 300 ns
    • Optical wavelength 1300 nm
    • Transmission distance up to 3000 meters
    • Power supply 5 VDC (for LW213)
    • Power supply 10 ... 30 VDC (for LW213-1, LW213-2, LW213-3)
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Pre-configured optical fibres are available
    Details

  • Motrona PB800: Profibus DPV1 Interface Module

    Features

    • Internal power supply 3,3 V
    • Ambient temperature 0° C ... +60° C / 32° F ... 140° F (operating), -40° C ... +70° C / -40 ... 158° F (storage)
    • 9600 Bit/s ... 12 MBit/s Baud rates
    • SUB-D-9-pin female, galvanically isolated
    Details

  • Motrona PN800: Profinet Interface Modul

    Features

    • Internal power supply 3,3 V
    • Ambient temperature 0° C ... +60° C (operating), -40° C ... +70° C (storage)
    • 100 MBit/s Vollduplex
    • 2 Ethernet-Ports RJ45 with integrated switch, galvanically isolated
    Details

  • Motrona PR210: Signal Converter Parallel >>> Serial RS232 / RS485

    Features

    • 20-bit parallel input  with format  BCD, binary or Gray-Code
    • Input frequency: fast encoder 5 kHz, auto-transmit / data logging 0.5 kHz
    • 4 status outputs, with push-pull characteristics, short-circuit-proof  [5 ... 30 VDC]
    • Power supply 10 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Serial RS232 / RS485 interface
    Details

  • Motrona SK232: RS232 cable

    Features

    • 1 connector Sub-D-9 (male)
    • 1 connector Sub-D-9 (female)
    • cable length 3 m (approx. 10 feet)
     
    Details

  • Motrona SV211: Sine-Cosine Signal Splitter for 4 SinCos Outputs

    Features

    • 1 encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
    • Maximum sinus input frequency 500 kHz with max. 200 ns conversion time
    • 4 signal outputs with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
    • Power supply 17 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    Details

  • Motrona USBAA: USB 2.0 cable

    Features

    • USB cable for connection between PC and the Motrona unit UZ210
    • Both connectors are type A
    • Cable length 2 m (approx. 6.5 feet)
    Details

  • Motrona USBAB: USB cable for motrona DS series

    Features

    • USB cable for connection between PC operator software and Motrona DS device
    • USB connector type A on type B
    • Length 1,8 m
    Details

  • Motrona USBAMiniB: USB 2.0 cable

    Features

    • USB cable for connection between PC and Motrona devices of the series IV/FU/PV/ZU210 and IP/FP/PP/ZP210
    • USB connector type A on type Mini B
    • Length 1,8 m
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top