+44 (0)1903 788287
Filtered (23)

  • CT701-Firmware: Eccentric Material Processing

    Features

    • MC700 is a universal motion controller for 1 to 4 axis, programmable for multiple motion applications by simple download of the corresponding function firmware
    • With the use of Matona's CT701 firmware, this unit provides excellent solutions with all kinds of guillotine cutters and rotary eccentric shears needing a cosine-compensated speed profile during the penetration of the tool
    • Extremely smooth motion  to protect  mechanical solution, by self-optimizing polynomial speed transitions
    • High cutting accuracy, even during line acceleration and at high speeds
    • Programmable cosine-compensated speed profile
    • Special torque control features to master the impact load when cutting hard materials like stainless steel etc.
    • Special profile features to avoid deadlock between tool and material
    • Embedded virtual master axis (selectable)
    • Black-box unit for cabinet mounting
    • Remote control and communication facilities via external operator terminal, serial PC communication, PROFIBUS or optional via CANBUS (MC700/CI) etc.
    Details

  • CT803-Firmware: Rotating Cross Cutters

    Features

    • 2 pulse inputs with format  A, /A, B, /B, Z, /Z [HTL, RS422]
    • With an input frequency of up to 2 MHz
    • 2 control inputs with format  SIN+, SIN-, COS+, COS- [1 Vss] with an input frequency of up to 400 kHz
    • 2 SSI inputs with format  DATA+, DATA-, CLOCK+, CLOCK- up to 25 Bit, with SSI switching frequency of 100 Hz ... 1 MHz
    • 2 scalable 14-bit analog inputs for ±10 V or 0/4 ... 20 mA
    • 4 control inputs for PNP / NPN signals [10 ... 30 VDC]
    • 4 fast interrupt inputs for PNP / NPN signals [10 ... 30 VDC]
    • 1 pulse output with format  A, /A, B, /B, Z, /Z [RS422]
    • 4 control outputs with push-pull characteristic, short-circuit-proof [5 ... 30 VDC]
    • 2 scalable 14-bit analog outputs for ±10 V or 0/4 ... 20 mA
    • Loop time approx. 250 µs
    • Power supply 18 ... 35 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • OnBoard interfaces: Ethernet / IP, RS232 / RS485, USB 2.0, CANopen, Modbus RTU
    • Optional Ethernet interfaces: EtherCAT, Ethernet / IP, Modbus TCP, Powerlink, PROFINET, SERCOS III
    • Optional Fieldbus interfaces (slave): CC-Link, DeviceNet, PROFIBUS
    • Operates with all 4-Q-drive systems, equipped with a standardized drive communication bus (e. g. SERCOS-II). Alternatively, ±10 V setpoint can be used
    • The controllers can be setup by an external operator terminal as well as HMI’s via standardized factory communication bus e.g. PROFINET
    • Setup via Windows operator software (free of charge)
    Details
  • Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Encoder Technology 25H Blind Hollow Shaft Incremental Encoder

    Features

    • 5mm Opto-ASIC encoder with a low profile (50.8mm)
    • Imperial bore sizes range from 0.625” to 1.125”
    • Metric bore sizes ranging from 6 mm to 28 mm
    • Single replacement solution for 50.8mm to 88.9mm encoders
    • Resolutions to 10,000 PPR, frequencies to 1 MHz
    • Versatile flexible mounting options
    • RoHS compliant
    • Corrosion-Resistant Option
    Details
  • Encoder Technology 58TF Blind Hollow Shaft Encoder

    Encoder Technology 58TF Blind Hollow Shaft Incremental Encoder

    Features

    • 58 mm package available in thru-bore or hollow bore
    • Resolutions from 1 to 65,536 PPR
    • 6 different output types to choose from
    • 32 different waveforms available
    • Standard and Metric Bore Sizes up to 5/8” and 15 mm
    • Several Flexible Mounting Options
    • IP67 Sealing Available
    Details
  • Encoder Technology 755HS Blind Holow Shaft Encoder

    Encoder Technology 755HS Blind Hollow Shaft Incremental Encoder

    Features

    • Miniature size (38.1mm diameter)
    • Up to 30,000 PPR
    • Flex mounting & large hollow bore option (Up to 14mm)
    • High-temperature option
    Details
  • Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Encoder Technology 760 Blind Hollow Shaft Incremental Encoder

    Features

    • Size 25 / 63.5mm Diameter (Hollow Shaft)
    • Up to 12 Pole Commutation Available
    • Thru Bore and Blind Bore Options
    • Simple, Innovative Flexible Mounting System
    • Incorporates Opto-ASIC Technology
     
    Details
  • Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Encoder Technology A58HE1 Blind Hollow Shaft Incremental Encoder

    Features

    • Number of output pulses per revolution 100-108000 ppr
    • Maximum shaft speed 10000 rpm
    • Permissible motion of shaft - axial: ± 0.5 mm- radial: ± 0.05 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
    • Starting torque at 20°C ≤ 0.025 Nm
    • Rotor moment of inertia < 1.5x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.3 kg
    • Operating temperature -10...+70°C
    • Storage temperature -30...+80°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (5 ms) ≤ 1000 m/s²
    Details

  • Motrona BY701-Firmware: Synchronization of Drives

    Features

    • MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
    • The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
    • Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
    • The number of successive axes can be extended arbitrarily via a cascading output.
    • MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
    • PROFIBUS connection possible via gateway PB251 (see accessories)
    Details
  • Motrona ZA330 Dual Differential Counter 8 digit with Analog Output

    Motrona ZA330 8-digit double/difference counter with analogue output

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 … 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZA340: 6-digit double/difference counter with analogue output

    Motrona ZA340: 6-digit double/difference counter with analogue output

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 … 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardised switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -199999 ... 999999 with 6 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZA630: 8-digit preset counter with analogue output

    Motrona ZA630: 8-digit preset counter with analogue output

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 ... 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZA634: 8-digit preset counter with analogue output and 4 preset switches

    Motrona ZA634: 8-digit preset counter with analogue output and 4 preset switches

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 ... 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 4 preselector switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD330 Dual Differential-Counter 8 digit

    Motrona ZD330 Double/difference counter 8 digits

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZD340: Dual/difference counter

    Motrona ZD340: Dual/difference counter, 6 digits

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardised switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -199999 ... 999999 with 6 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZD630: 8-digit preset counter

    Motrona ZD630: 8-digit preset counter (96 x 96 mm)

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD632: 8-digit preset counter with 2 preset switches on the front

    Motrona ZD632: 8-digit preset counter with 2 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 2 pre-selection switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD634 Preselect Counter 8 digits with 4 front-mounted Thumbwheel Switches

    Motrona ZD634: 8-digit preset counter with 4 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 4 preselector switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD640 Preselect Counter 6 digits

    Motrona ZD640: 6-digit preset counter

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD642 Preselect Counter 6 digits with 2 front-mounted Thumbwheel Switches

    Motrona ZD642: 6-digit preset counter with 2 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 2 pre-selection switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD644: 6-digit preset counter with 4 preset switches on the front

    Motrona ZD644: 6-digit preset counter with 4 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 4 preselector switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZX020 Small-sized Position- and Event Counter

    Motrona ZX020 Miniature counter for positions and events

    Features

    • Pulse input in format A, B, 90° [HTL]
    • Static Input for Set / Reset [HTL]
    • Input frequency up to 20 kHz
    • Power supply 24 VDC
    • Standardised miniature switch panel housing with the dimensions 48 x 24 x 59 mm
    • 6 decades LED display with 8 mm digit height
    • Display range -199999 ... 999999
    • Counting frequency 15 ... 60 kHz, depending on the operating mode
    • Programmable counting function (A with B as direction specification, sum A + B, difference A - B, position A / B with 90° phase offset)
    • Switchable pulse multiplication (x2, x4) as well as adjustable multiplier and divider 0.0001 ... 99.9999
    • Actual value memory (10 years)
    • Simple parameterisation via 2 front keys and menu navigation
    Details
  • Tamagawa Seiki TS5208N305 Hollowshaft Encoder OIH48 Series

    Tamagawa Hollowshaft Encoder OIH48 Series TS5208N305

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5208N530 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5208N530 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top