+44 (0)1903 788287
Filtered (27)
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15H Blind Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15T Through Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Features

    • 5mm Opto-ASIC encoder with a low profile (50.8mm)
    • Imperial bore sizes range from 0.625” to 1.125”
    • Metric bore sizes ranging from 6 mm to 28 mm
    • Single replacement solution for 50.8mm to 88.9mm encoders
    • Resolutions to 10,000 PPR, frequencies to 1 MHz
    • Versatile flexible mounting options
    • RoHS compliant
    • Corrosion-Resistant Option
    Details
  • Encoder Technology 260 Through hollow shaft Incremental encoder

    Encoder Technology 260 Through Hollow Shaft Incremental Encoder

    Features

    • Low profile 30.3mm
    • Up to 12 pole commutation
    • Thru-bore and hollow-bore (blind) styles
    • Simple, innovative flexible mounting system
    • Incorporates Opto-ASIC technology
    Details
  • Encoder Technology 75HA Through HolIow Shaft Incremental Encoder

    Encoder Technology 75HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 2Ncm (typical)
    • Inertia: 100gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 75HS-Hollow shaft incremental Encoder

    Encoder Technology 75HS Through Hollow Shaft Incremental Encoder

    Features

    • Body: Stainless Steel (316)
    • Cover: Stainless Steel (316)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing + Single lip seal
    • Rear: Single lip seal on the rear of the cover
    • Protection: (IP66 / IP67)
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM
    • Torque: 4Ncm (typical)
    • Inertia: 200gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Features

    • Size 25 / 63.5mm Diameter (Hollow Shaft)
    • Up to 12 Pole Commutation Available
    • Thru Bore and Blind Bore Options
    • Simple, Innovative Flexible Mounting System
    • Incorporates Opto-ASIC Technology
     
    Details
  • Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Features

    • Thru-bore design for easy mounting
    • Bore options to 1.375" and 32mm
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • 100° C operating temperature available
    Details
  • Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Features

    • Slim profile—only 34.5mm in depth
    • Thru-bore design for easy mounting
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • Bore options to 1.875" and 43mm
    Details
  • Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing
    • Rear: Single lip seal on the rear of the cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 3Ncm (typical)
    • Inertia: 600gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology A102H Large Bore Encoder

    Encoder Technology A102H Large Bore Through Hollow Shaft Encoder

    Features

    • Number of output pulses per revolution 5.000 - 500.000 ppr
    • Line number on disc (z) 5.000
    • Maximum shaft speed 8000 rpm
    • The permissible motion of the shaft - axial: ± 1.00 mm - radial: 0.02 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
    • Starting torque at 20°C ≤ 0.01 Nm
    • Rotor moment of inertia < 20x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.8 kg
    • Operating temperature -20...+70°C
    • Storage temperature -30...+85°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (11 ms) ≤ 300m/s²
    Details
  • Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Features

    • Number of output pulses per revolution 100-108000 ppr
    • Maximum shaft speed 10000 rpm
    • The permissible motion of the shaft - axial: ± 0.5 mm - radial: ± 0.05 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
    • Starting torque at 20°C ≤ 0.025 Nm
    • Rotor moment of inertia < 1.5x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.3 kg
    • Operating temperature -10...+70°C
    • Storage temperature -30...+80°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (5 ms) ≤ 1000 m/s²
    Details

  • Motrona BY701-Firmware: Synchronization of Drives

    Features

    • MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
    • The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
    • Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
    • The number of successive axes can be extended arbitrarily via a cascading output.
    • MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
    • PROFIBUS connection possible via gateway PB251 (see accessories)
    Details
  • Motrona ZA330 Dual Differential Counter 8 digit with Analog Output

    Motrona ZA330 8-digit double/difference counter with analogue output

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 … 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZA340: 6-digit double/difference counter with analogue output

    Motrona ZA340: 6-digit double/difference counter with analogue output

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 … 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardised switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -199999 ... 999999 with 6 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZA630: 8-digit preset counter with analogue output

    Motrona ZA630: 8-digit preset counter with analogue output

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 ... 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZA634: 8-digit preset counter with analogue output and 4 preset switches

    Motrona ZA634: 8-digit preset counter with analogue output and 4 preset switches

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 ... 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 4 preselector switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD330 Dual Differential-Counter 8 digit

    Motrona ZD330 Double/difference counter 8 digits

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZD340: Dual/difference counter

    Motrona ZD340: Dual/difference counter, 6 digits

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardised switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -199999 ... 999999 with 6 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZD630: 8-digit preset counter

    Motrona ZD630: 8-digit preset counter (96 x 96 mm)

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD632: 8-digit preset counter with 2 preset switches on the front

    Motrona ZD632: 8-digit preset counter with 2 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 2 pre-selection switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD634 Preselect Counter 8 digits with 4 front-mounted Thumbwheel Switches

    Motrona ZD634: 8-digit preset counter with 4 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 4 preselector switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD640 Preselect Counter 6 digits

    Motrona ZD640: 6-digit preset counter

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD642 Preselect Counter 6 digits with 2 front-mounted Thumbwheel Switches

    Motrona ZD642: 6-digit preset counter with 2 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 2 pre-selection switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD644: 6-digit preset counter with 4 preset switches on the front

    Motrona ZD644: 6-digit preset counter with 4 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 4 preselector switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top