+44 (0)1903 788287
Filtered (26)
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15H Blind Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15T Through Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Features

    • 5mm Opto-ASIC encoder with a low profile (50.8mm)
    • Imperial bore sizes range from 0.625” to 1.125”
    • Metric bore sizes ranging from 6 mm to 28 mm
    • Single replacement solution for 50.8mm to 88.9mm encoders
    • Resolutions to 10,000 PPR, frequencies to 1 MHz
    • Versatile flexible mounting options
    • RoHS compliant
    • Corrosion-Resistant Option
    Details
  • Encoder Technology 260 Through hollow shaft Incremental encoder

    Encoder Technology 260 Through Hollow Shaft Incremental Encoder

    Features

    • Low profile 30.3mm
    • Up to 12 pole commutation
    • Thru-bore and hollow-bore (blind) styles
    • Simple, innovative flexible mounting system
    • Incorporates Opto-ASIC technology
    Details
  • Encoder Technology 75HA Through HolIow Shaft Incremental Encoder

    Encoder Technology 75HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 2Ncm (typical)
    • Inertia: 100gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 75HS-Hollow shaft incremental Encoder

    Encoder Technology 75HS Through Hollow Shaft Incremental Encoder

    Features

    • Body: Stainless Steel (316)
    • Cover: Stainless Steel (316)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing + Single lip seal
    • Rear: Single lip seal on the rear of the cover
    • Protection: (IP66 / IP67)
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM
    • Torque: 4Ncm (typical)
    • Inertia: 200gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Features

    • Size 25 / 63.5mm Diameter (Hollow Shaft)
    • Up to 12 Pole Commutation Available
    • Thru Bore and Blind Bore Options
    • Simple, Innovative Flexible Mounting System
    • Incorporates Opto-ASIC Technology
     
    Details
  • Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Features

    • Thru-bore design for easy mounting
    • Bore options to 1.375" and 32mm
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • 100° C operating temperature available
    Details
  • Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Features

    • Slim profile—only 34.5mm in depth
    • Thru-bore design for easy mounting
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • Bore options to 1.875" and 43mm
    Details
  • Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing
    • Rear: Single lip seal on the rear of the cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 3Ncm (typical)
    • Inertia: 600gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology A102H Large Bore Encoder

    Encoder Technology A102H Large Bore Through Hollow Shaft Encoder

    Features

    • Number of output pulses per revolution 5.000 - 500.000 ppr
    • Line number on disc (z) 5.000
    • Maximum shaft speed 8000 rpm
    • The permissible motion of the shaft - axial: ± 1.00 mm - radial: 0.02 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
    • Starting torque at 20°C ≤ 0.01 Nm
    • Rotor moment of inertia < 20x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.8 kg
    • Operating temperature -20...+70°C
    • Storage temperature -30...+85°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (11 ms) ≤ 300m/s²
    Details
  • Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Features

    • Number of output pulses per revolution 100-108000 ppr
    • Maximum shaft speed 10000 rpm
    • The permissible motion of the shaft - axial: ± 0.5 mm - radial: ± 0.05 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
    • Starting torque at 20°C ≤ 0.025 Nm
    • Rotor moment of inertia < 1.5x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.3 kg
    • Operating temperature -10...+70°C
    • Storage temperature -30...+80°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (5 ms) ≤ 1000 m/s²
    Details
  • Motrona ZA330 Dual Differential Counter 8 digit with Analog Output

    Motrona ZA330 8-digit double/difference counter with analogue output

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 … 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZA340: 6-digit double/difference counter with analogue output

    Motrona ZA340: 6-digit double/difference counter with analogue output

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 … 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardised switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -199999 ... 999999 with 6 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZA630: 8-digit preset counter with analogue output

    Motrona ZA630: 8-digit preset counter with analogue output

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 ... 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZA634: 8-digit preset counter with analogue output and 4 preset switches

    Motrona ZA634: 8-digit preset counter with analogue output and 4 preset switches

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • Scalable 14-bit analogue output ±10 V or 0/4 ... 20 mA
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 4 preselector switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD330 Dual Differential-Counter 8 digit

    Motrona ZD330 Double/difference counter 8 digits

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZD340: Dual/difference counter

    Motrona ZD340: Dual/difference counter, 6 digits

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardised switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -199999 ... 999999 with 6 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 48 x 140 mm
    Details
  • Motrona ZD630: 8-digit preset counter

    Motrona ZD630: 8-digit preset counter (96 x 96 mm)

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD632: 8-digit preset counter with 2 preset switches on the front

    Motrona ZD632: 8-digit preset counter with 2 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 2 pre-selection switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD634 Preselect Counter 8 digits with 4 front-mounted Thumbwheel Switches

    Motrona ZD634: 8-digit preset counter with 4 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 8 decades with 10 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 4 preselector switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD640 Preselect Counter 6 digits

    Motrona ZD640: 6-digit preset counter

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD642 Preselect Counter 6 digits with 2 front-mounted Thumbwheel Switches

    Motrona ZD642: 6-digit preset counter with 2 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 2 pre-selection switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZD644: 6-digit preset counter with 4 preset switches on the front

    Motrona ZD644: 6-digit preset counter with 4 preset switches on the front

    Features

    • 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
    • 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 1MHz
    • 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
    • 4 output relays with potential-free changeover contact
    • 4 programmable limits
    • Power supply 24 VAC and 17 ... 40 VDC
    • Standardized switch panel housing
    • LED display 6 decades with 15 mm digit height
    • Display range -19999999 ... 99999999 with 8 decades
    • 4 preselector switches on the front
    • Serial RS232 interface
    • Dimensions W x H x D = 96 x 96 x 140 mm
    Details
  • Motrona ZX020 Small-sized Position- and Event Counter

    Motrona ZX020 Miniature counter for positions and events

    Features

    • Pulse input in format A, B, 90° [HTL]
    • Static Input for Set / Reset [HTL]
    • Input frequency up to 20 kHz
    • Power supply 24 VDC
    • Standardised miniature switch panel housing with the dimensions 48 x 24 x 59 mm
    • 6 decades LED display with 8 mm digit height
    • Display range -199999 ... 999999
    • Counting frequency 15 ... 60 kHz, depending on the operating mode
    • Programmable counting function (A with B as direction specification, sum A + B, difference A - B, position A / B with 90° phase offset)
    • Switchable pulse multiplication (x2, x4) as well as adjustable multiplier and divider 0.0001 ... 99.9999
    • Actual value memory (10 years)
    • Simple parameterisation via 2 front keys and menu navigation
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top