+44 (0)1903 788287
Filtered (65)
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15H Blind Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15T Through Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Features

    • 5mm Opto-ASIC encoder with a low profile (50.8mm)
    • Imperial bore sizes range from 0.625” to 1.125”
    • Metric bore sizes ranging from 6 mm to 28 mm
    • Single replacement solution for 50.8mm to 88.9mm encoders
    • Resolutions to 10,000 PPR, frequencies to 1 MHz
    • Versatile flexible mounting options
    • RoHS compliant
    • Corrosion-Resistant Option
    Details
  • Encoder Technology 260 Through hollow shaft Incremental encoder

    Encoder Technology 260 Through Hollow Shaft Incremental Encoder

    Features

    • Low profile 30.3mm
    • Up to 12 pole commutation
    • Thru-bore and hollow-bore (blind) styles
    • Simple, innovative flexible mounting system
    • Incorporates Opto-ASIC technology
    Details
  • Encoder Technology 75HA Through HolIow Shaft Incremental Encoder

    Encoder Technology 75HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 2Ncm (typical)
    • Inertia: 100gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 75HS-Hollow shaft incremental Encoder

    Encoder Technology 75HS Through Hollow Shaft Incremental Encoder

    Features

    • Body: Stainless Steel (316)
    • Cover: Stainless Steel (316)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing + Single lip seal
    • Rear: Single lip seal on the rear of the cover
    • Protection: (IP66 / IP67)
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM
    • Torque: 4Ncm (typical)
    • Inertia: 200gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Features

    • Size 25 / 63.5mm Diameter (Hollow Shaft)
    • Up to 12 Pole Commutation Available
    • Thru Bore and Blind Bore Options
    • Simple, Innovative Flexible Mounting System
    • Incorporates Opto-ASIC Technology
     
    Details
  • Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Features

    • Thru-bore design for easy mounting
    • Bore options to 1.375" and 32mm
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • 100° C operating temperature available
    Details
  • Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Features

    • Slim profile—only 34.5mm in depth
    • Thru-bore design for easy mounting
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • Bore options to 1.875" and 43mm
    Details
  • Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing
    • Rear: Single lip seal on the rear of the cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 3Ncm (typical)
    • Inertia: 600gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology A102H Large Bore Encoder

    Encoder Technology A102H Large Bore Through Hollow Shaft Encoder

    Features

    • Number of output pulses per revolution 5.000 - 500.000 ppr
    • Line number on disc (z) 5.000
    • Maximum shaft speed 8000 rpm
    • The permissible motion of the shaft - axial: ± 1.00 mm - radial: 0.02 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
    • Starting torque at 20°C ≤ 0.01 Nm
    • Rotor moment of inertia < 20x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.8 kg
    • Operating temperature -20...+70°C
    • Storage temperature -30...+85°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (11 ms) ≤ 300m/s²
    Details
  • Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Features

    • Number of output pulses per revolution 100-108000 ppr
    • Maximum shaft speed 10000 rpm
    • The permissible motion of the shaft - axial: ± 0.5 mm - radial: ± 0.05 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
    • Starting torque at 20°C ≤ 0.025 Nm
    • Rotor moment of inertia < 1.5x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.3 kg
    • Operating temperature -10...+70°C
    • Storage temperature -30...+80°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (5 ms) ≤ 1000 m/s²
    Details

  • Motrona BY340: Synchronous Controller for 1 Follower Axis

    Features

    • 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
    • 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 300 kHz
    • 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
    • 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
    • Loop time approx. 250 µs
    • Power supply 24 VAC and 17 … 40 VDC
    • Compact norm panel housing (according to EN 60715)
    • Top hat rail mounting by using SM300 support brackets (option)
    • Setup via keys or via PC by serial RS232 interface
    • PROFIBUS connection via Motrona gateway PB251
    Details

  • Motrona BY641: Master / Slave Synchronizers with 4 Relays

    Features

    • 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
    • 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 300 kHz
    • 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
    • 4 potential-free changeover relay outputs
    • 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
    • Loop time approx. 250 µs
    • Power supply 24 VAC and 17 … 40 VDC
    • Compact norm panel housing (according to EN 60715)
    • Top hat rail mounting by using SM600 support brackets (option)
    • Setup via keys or via PC by serial RS232 interface
    • PROFIBUS connection via Motrona gateway PB251
    Details

  • Motrona BY701-Firmware: Synchronization of Drives

    Features

    • MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
    • The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
    • Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
    • The number of successive axes can be extended arbitrarily via a cascading output.
    • MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
    • PROFIBUS connection possible via gateway PB251 (see accessories)
    Details

  • Motrona DM221: Strain Gauge Amplifier >>> Analog

    Features

    • 6-wire connection for one strain gauge full bridge sensor
    • 4 control inputs [HTL/PNP]
    • 1 analog output ±10 V, 0/4 ... 20 mA, 16 bit
    • 4 control outputs for signalling different operation states
    • Power supply 18 ... 30 VDC
    • Functions for scaling and linking the sensor signals (e.g. A+B, A-B, ...)
    • Adjustable bridge voltage per sensor from 3 VDC ... 10 VDC
    • Sensitivity of the sensor inputs 1 ... 10 mV
    • Transmission of the sensor data via RS485
    • Programming via USB and the user interface OS (freeware)
    • Protection class IP20
    • Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
    Details

  • Motrona DM222: 2 channel Strain Gauge Amplifier >>> Analog

    Features

    • 6-wire connection for two independent strain gauge full bridge sensors
    • 4 control inputs [HTL/PNP]
    • 2 independent analog outputs ±10 V, 0/4 ... 20 mA, 16 bit
    • 4 control outputs for signalling different operation states
    • Power supply 18 ... 30 VDC
    • Functions for scaling and linking the sensor signals (e.g. A+B, A-B, ...)
    • Adjustable bridge voltage per sensor from 3 VDC ... 10 VDC
    • Sensitivity of the sensor inputs 1 ... 10 mV
    • Transmission of the sensor data via RS485
    • Programming via USB and the user interface OS (freeware)
    • Protection class IP20
    • Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
    Details

  • Motrona ET224: Expansion Module for GV series with Potential Separation, 4 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 4 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 34 x 118 x 140 mm (1,34 x 4,65 x 5,51")
    Details

  • Motrona ET228: Expansion Module for GV series with Potential Separation, 8 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 8 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 54 x 118 x 140 mm (2,13 x 4,65 x 5,51")
    Details

  • Motrona EV224: Expansion Module for GV series without Potential Separation, 4 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 4 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 34 x 118 x 140 mm (1,34 x 4,65 x 5,51")
    Details

  • Motrona EV228: Expansion Module for GV series without Potential Separation, 8 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 8 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 54 x 118 x 140 mm (2,13 x 4,65 x 5,51")
    Details

  • Motrona FM210: Frequency Multiplier / Frequency Divider

    Features

    • Pulse input with format A, B, Z [HTL single-ended, TTL single-ended] or A, /A, B, /B, Z, /Z [RS422, HTL differential]
    • 4 control inputs for HTL, PNP signals [10 ... 30 VDC]
    • Input and output frequency up to 1 MHz
    • 3 incremental outputs with format A, /A, B, /B, Z, /Z, Push-Pull, [8 … 29 VDC]
    • Power supply 9 ... 30 VDC
    • Snap-on housing for top-hat rail (acc. EN 60715)
    • Multiplier/divisor adjustable as quotient F1 / F2
    • Multiplication/division without cumulative residual errors
    • Additional functions such as jog, trim, offset and reference
    Details

  • Motrona FM260: Programmable Pulse and Frequency Multiplier

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B, Z, /Z [RS422]
    • 4 control inputs for PNP signals [10 ... 30 VDC]
    • Input and output frequency up to 1 MHz
    • Pulse output with format A, /A, B, /B, Z, /Z and push-pull characteristic, [5 ... 30 VDC]
    • Power supply 11 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • LCD backlighted
    • Setup via keys, RS232
    • The device multiplies an incoming frequency by a proportional factor F1 and a reciprocal factor F2. The two factors F1 and F2 are adjustable in the range of 0.0005 to 9.9999
    • All operation modes provide error-free frequency conversion, with full consideration of the A / B phase and direction of the quadrature signals, therefore no cumulative errors, even with continuous changes of directions and vibrations
    • Zero pulse generator: the frequency multiplier generates at the output an index signal with an adjustable pulse interval, which can be synchronized as needed with the zero pulse at the input
    Details

  • Motrona FP210: Signal Converter Frequency >>> Parallel

    Features

    • Frequency inputs A, B [HTL], A, / A, B, / B [RS422, HTL]
    • 3 control inputs (hold) for PNP signals [10 ... 30 VDC]
    • SSI input in the format DATA +, DATA-, CLOCK +, CLOCK- up to 32 bits
    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • Input frequency up to 1 MHz
    • 25-bit parallel output push-pull in BCD, binary or Gray code format
    • Power supply 18 ... 30 VDC
    • Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
    Details

  • Motrona FU210: Signal Converter Frequency >>> Analog / Serial RS232/RS485

    Features

    • Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
    • Input frequency up to 1 MHz [RS422], 200 kHz [HTL]
    • Analog output ±10 V or 0/4 ... 20 mA, 16 Bit
    • Power supply 18 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Setup via operator software OS6.0
    • Serial RS232- / RS485 interface
    • SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • USB interface and RS232/RS485 interface for configuration and serial readout
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top