+44 (0)1903 788287
Filtered (39)

  • CT701-Firmware: Eccentric Material Processing

    Features

    • MC700 is a universal motion controller for 1 to 4 axis, programmable for multiple motion applications by simple download of the corresponding function firmware
    • With the use of Matona's CT701 firmware, this unit provides excellent solutions with all kinds of guillotine cutters and rotary eccentric shears needing a cosine-compensated speed profile during the penetration of the tool
    • Extremely smooth motion  to protect  mechanical solution, by self-optimizing polynomial speed transitions
    • High cutting accuracy, even during line acceleration and at high speeds
    • Programmable cosine-compensated speed profile
    • Special torque control features to master the impact load when cutting hard materials like stainless steel etc.
    • Special profile features to avoid deadlock between tool and material
    • Embedded virtual master axis (selectable)
    • Black-box unit for cabinet mounting
    • Remote control and communication facilities via external operator terminal, serial PC communication, PROFIBUS or optional via CANBUS (MC700/CI) etc.
    Details

  • CT803-Firmware: Rotating Cross Cutters

    Features

    • 2 pulse inputs with format  A, /A, B, /B, Z, /Z [HTL, RS422]
    • With an input frequency of up to 2 MHz
    • 2 control inputs with format  SIN+, SIN-, COS+, COS- [1 Vss] with an input frequency of up to 400 kHz
    • 2 SSI inputs with format  DATA+, DATA-, CLOCK+, CLOCK- up to 25 Bit, with SSI switching frequency of 100 Hz ... 1 MHz
    • 2 scalable 14-bit analog inputs for ±10 V or 0/4 ... 20 mA
    • 4 control inputs for PNP / NPN signals [10 ... 30 VDC]
    • 4 fast interrupt inputs for PNP / NPN signals [10 ... 30 VDC]
    • 1 pulse output with format  A, /A, B, /B, Z, /Z [RS422]
    • 4 control outputs with push-pull characteristic, short-circuit-proof [5 ... 30 VDC]
    • 2 scalable 14-bit analog outputs for ±10 V or 0/4 ... 20 mA
    • Loop time approx. 250 µs
    • Power supply 18 ... 35 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • OnBoard interfaces: Ethernet / IP, RS232 / RS485, USB 2.0, CANopen, Modbus RTU
    • Optional Ethernet interfaces: EtherCAT, Ethernet / IP, Modbus TCP, Powerlink, PROFINET, SERCOS III
    • Optional Fieldbus interfaces (slave): CC-Link, DeviceNet, PROFIBUS
    • Operates with all 4-Q-drive systems, equipped with a standardized drive communication bus (e. g. SERCOS-II). Alternatively, ±10 V setpoint can be used
    • The controllers can be setup by an external operator terminal as well as HMI’s via standardized factory communication bus e.g. PROFINET
    • Setup via Windows operator software (free of charge)
    Details
  • Encoder Technology 15S Standard Shaft Incremental Encoder

    Encoder Technology 15S Standard Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—less than 25.4 mm height and 38 mm diameter
    • Extended temperature operating ranges available
    • Up to 12-pole commutation optional (for brushless motor control)
    Details
  • Encoder Technology 25SF Standard Shaft Incremental Encoder

    Encoder Technology 25SF Standard Shaft Incremental Encoder

    Features

    • Standard Size 25 package (63.5mm x 63.5mm)
    • Optical technology for high accuracy
    • Resolutions from 1 to 65,536 PPR (262,144 quadrature counts)
    • Servo and flange mounting
    • IP67 sealing available
    Details
  • Encoder Technology 702 Standard Shaft Incremental Encoder

    Encoder Technology 702 Standard Shaft Incremental Encoder

    Features

    • Standard Size 20 package (50.8mm x 50.8mm)
    • Flange and servo mounting
    • Up to 30,000 PPR
    • 35Kg maximum axial and radial shaft loading
    • IP67 sealing available
    Details
  • Encoder Technology 711 716 Standard Shaft Incremental Encoder

    Encoder Technology 711 & 716 Standard Shaft Incremental Encoder

    Features

    • The original industry-standard cube
    • Five versatile housing styles
    • Single or Quadrature output
    • New resolutions available to 10,000 PPR
    Details
  • Encoder Technology 725 Standard Shaft Incremental Encoder

    Encoder Technology 725 Standard Shaft Incremental Encoder

    Features

    • Standard Size 25 package (63.5 x 63.5)
    • Up to 30,000 PPR
    • Standard and industrial housings
    • Servo and flange mounting
    • IP67 sealing available
    Details
  • Encoder Technology 744 Standard Shaft Incremental Encoder

    Encoder Technology 744 Standard Shaft Incremental Encoders

    Features

    • Standard "444" Style, 115mm Diameter
    • Up to 30,000 PPR
    • Choice of Shaft Sizes
    • IP64 Sealing Available
    Details
  • Encoder Technology 755RG Standard Shaft Incremental Encoder

    Encoder Technology 755RG Standard Shaft Incremental Encoders

    Features

    • Miniature size (38.1mm diameter)
    • Up to 30,000 PPR
    • Servo or flange mounting
    • 1 MHz frequency response available
    • Extended temperature operating range available
    Details
  • 758 Standard Shaft Incremental Encoder

    Encoder Technology 758 Standard Shaft Incremental Encoders

    Features

    • Standard Size 58 mounting (58 mm diameter)
    • Up to 30,000 PPR
    • 36 Kg max. Axial and radial shaft loading
    • High-temperature option (100° C)
    • IP65 sealing available
    Details
  • Encoder Technology 7RP Extra heavy Duty Standard Shaft Incremental

    Encoder Technology 7RP Standard Shaft Incremental Encoder

    Features

    • Extra Heavy Duty Mechanical Assembly
    • Single Ended or Double Ended Shaft
    • Reversible Face Fixing Option
    • Incorporates Opto-ASIC Technology
    Details
  • 86A Standard Shaft Incremental Encoder

    Encoder Technology 86A Standard Shaft Incremental Encoder

    Features

    • Standard 68mm Diameter Package
    • Up to 30000 PPR, Opto-Asic Technology
    • Square Flange Mounting
    • IP65 Double O-ring Sealed
    Details
  • Encoder Technology 86F Extra Heavy Duty Standard Shaft Incremental

    Encoder Technology 86F Standard Shaft Incremental Encoder

    Features

    • Transverse Slotted Shaft
    • Up to 30000 PPR, Opto-Asic Technology
    • 90mm Round Flange with 3 x 4.5mm Dia Fixing Holes at 120° Apart on a 82mm PCD
    • Double O-ring Sealed
    Details
  • Encoder Technology A28 Standard Shaft Encoder

    Encoder Technology A28 Standard Shaft Incremental Encoder

    Features

    • Type: Photoelectric rotary encoder (converts rotational movement into electrical signals)
    • Function: Incremental (tracks changes in rotation rather than absolute position)
    • Diameter: Compact size of 28 mm
    • High resolution: Up to 25,000 output pulses per revolution (providing detailed rotational information)
    • Benefit: Well-suited for applications with limited space due to its small size
    Details
  • Encoder Technolohy CMT Non Contact Magnetic Linear Scales

    Encoder Technology CMT Non contact magnetic linear encoder

    Features

    • Type: Non-contact magnetic linear encoder (measures displacement without physical contact)
    • Measuring length: Up to 50 meters
    • Function: Converts linear movements of machine components into electrical signals with information about:
      • Value: Distance travelled
      • Direction: Forward or backward movement
    • Durability: Designed for harsh industrial environments and resistant to various contaminants and physical impacts.
    • Components:
      • Metal-based magnetic band (MP): Stores the encoded information
      • Reading head: Detects the magnetic field variations on the band and converts them into electrical signals
      • Profile rail (PS) with protective band: Provides mounting and protects the reading head
    Details
  • Encoder Technology 755RG Standard Shaft Incremental Encoder

    Encoder Technology E546 Standard Shaft Incremental Encoders

    Features

    • Miniature size (38.1mm diameter)
    • Up to 30,000 PPR
    • Servo or flange mounting
    • 1 MHz frequency response available
    • Extended temperature operating range available
    Details
  • 758 Standard Shaft Incremental Encoder

    Encoder Technology EB58 Standard Shaft Incremental Encoders

    Features

    • Standard Size 58 mounting (58 mm diameter)
    • Up to 30,000 PPR
    • 36 Kg max. Axial and radial shaft loading
    • High-temperature option (100° C)
    • IP65 sealing available
    Details
  • 758 Standard Shaft Incremental Encoder

    Encoder Technology EC58 Standard Shaft Incremental Encoders

    Features

    • Standard Size 58 mounting (58 mm diameter)
    • Up to 30,000 PPR
    • 36 Kg max. Axial and radial shaft loading
    • High temperature option (100° C)
    • IP65 sealing available
    Details
  • Encoder Technology L18 Linear Scales

    Encoder Technology L18 Linear Scales

    Features

    • Type: Photoelectric linear displacement measuring device (measures changes in position)
    • Measuring length: Up to 2.040 mm
    • Grating period: Two options available: ±20 µm or ±40 µm (determines the smallest detectable movement)
    • Accuracy: Up to ±3 µm (indicates the encoder's closeness to the actual displacement)
    Details
  • Encoder Technology L18B Linear Scales

    Encoder Technology L18B Linear Scales

    Features

    • Measuring length: Up to 3.240 mm
    • Accuracy: Up to ±5 µm within any meter of its measuring length
    • Grating periods: Available in two options: ±20 µm and ±40 µm
    Details
  • Encoder Technology L18T Linear Scales

    Encoder Technology L18T Linear Scales

    Features

    • Similar to the L18 series: Shares most functionalities and specifications with the L18 series encoders.
    • Different housing fixation: Requires distinct mounting methods compared to the L18 series.
    • Improved thermal behaviour: More stable performance under different temperatures.
    Details
  • Encoder Technology L23 Linear Scales

    Encoder Technology L23

    Features

    • Type: Photoelectric modular linear encoder
    • Measuring length:
      • Up to 20,000 mm (20 meters)
      • Can be even longer with special order
    • Accuracy: Up to ±3 µm
     
    Details
  • Encoder Technology L35 Linear Scales

    Encoder Technology L35 Linear Scales

    Features

    • Type: Incremental linear displacement measuring device (measures changes in position)
    • Measuring length: Up to 3.240 mm
    • Accuracy: Up to ±3 µm within any meter of its measuring length (accuracy scales with length)
    • Vibration resistance: More resistant to vibrations than the L18 series encoders
    Details
  • Encoder Technology L35T Linear Scales

    Encoder Technology L35T Linear Scales

    Features

    • Similar to the L35 series: Shares most functionalities and specifications with the L35 series encoders.
    • Different mounting parameters: Requires distinct mounting methods compared to the L35 series.
    • Measuring length: Up to 3.240 mm.
    • Enhanced vibration resistance: More resistant to vibrations than the L18 series encoders, making it suitable for applications with higher vibration levels.
     
    Details
  • Encoder Technology L37 Linear Scales

    Encoder Technology L37 Linear Scales

    Features

    • Type: Incremental encoder
    • Thermal behaviour: Reproducible, indicating stability under temperature changes
    • Reading head: Reversible for flexibility in installation
    • Measuring length: Up to 3.240 mm
    • Accuracy: Up to ±3 µm within the measuring length
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top