+44 (0)1903 788287
Filtered (16)

  • CT701-Firmware: Eccentric Material Processing

    Features

    • MC700 is a universal motion controller for 1 to 4 axis, programmable for multiple motion applications by simple download of the corresponding function firmware
    • With the use of Matona's CT701 firmware, this unit provides excellent solutions with all kinds of guillotine cutters and rotary eccentric shears needing a cosine-compensated speed profile during the penetration of the tool
    • Extremely smooth motion  to protect  mechanical solution, by self-optimizing polynomial speed transitions
    • High cutting accuracy, even during line acceleration and at high speeds
    • Programmable cosine-compensated speed profile
    • Special torque control features to master the impact load when cutting hard materials like stainless steel etc.
    • Special profile features to avoid deadlock between tool and material
    • Embedded virtual master axis (selectable)
    • Black-box unit for cabinet mounting
    • Remote control and communication facilities via external operator terminal, serial PC communication, PROFIBUS or optional via CANBUS (MC700/CI) etc.
    Details

  • CT803-Firmware: Rotating Cross Cutters

    Features

    • 2 pulse inputs with format  A, /A, B, /B, Z, /Z [HTL, RS422]
    • With an input frequency of up to 2 MHz
    • 2 control inputs with format  SIN+, SIN-, COS+, COS- [1 Vss] with an input frequency of up to 400 kHz
    • 2 SSI inputs with format  DATA+, DATA-, CLOCK+, CLOCK- up to 25 Bit, with SSI switching frequency of 100 Hz ... 1 MHz
    • 2 scalable 14-bit analog inputs for ±10 V or 0/4 ... 20 mA
    • 4 control inputs for PNP / NPN signals [10 ... 30 VDC]
    • 4 fast interrupt inputs for PNP / NPN signals [10 ... 30 VDC]
    • 1 pulse output with format  A, /A, B, /B, Z, /Z [RS422]
    • 4 control outputs with push-pull characteristic, short-circuit-proof [5 ... 30 VDC]
    • 2 scalable 14-bit analog outputs for ±10 V or 0/4 ... 20 mA
    • Loop time approx. 250 µs
    • Power supply 18 ... 35 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • OnBoard interfaces: Ethernet / IP, RS232 / RS485, USB 2.0, CANopen, Modbus RTU
    • Optional Ethernet interfaces: EtherCAT, Ethernet / IP, Modbus TCP, Powerlink, PROFINET, SERCOS III
    • Optional Fieldbus interfaces (slave): CC-Link, DeviceNet, PROFIBUS
    • Operates with all 4-Q-drive systems, equipped with a standardized drive communication bus (e. g. SERCOS-II). Alternatively, ±10 V setpoint can be used
    • The controllers can be setup by an external operator terminal as well as HMI’s via standardized factory communication bus e.g. PROFINET
    • Setup via Windows operator software (free of charge)
    Details
  • Encoder Technolohy CMT Non Contact Magnetic Linear Scales

    Encoder Technology CMT Non contact magnetic linear encoder

    Features

    • Type: Non-contact magnetic linear encoder (measures displacement without physical contact)
    • Measuring length: Up to 50 meters
    • Function: Converts linear movements of machine components into electrical signals with information about:
      • Value: Distance travelled
      • Direction: Forward or backward movement
    • Durability: Designed for harsh industrial environments and resistant to various contaminants and physical impacts.
    • Components:
      • Metal-based magnetic band (MP): Stores the encoded information
      • Reading head: Detects the magnetic field variations on the band and converts them into electrical signals
      • Profile rail (PS) with protective band: Provides mounting and protects the reading head
    Details
  • Encoder Technology L18 Linear Scales

    Encoder Technology L18 Linear Scales

    Features

    • Type: Photoelectric linear displacement measuring device (measures changes in position)
    • Measuring length: Up to 2.040 mm
    • Grating period: Two options available: ±20 µm or ±40 µm (determines the smallest detectable movement)
    • Accuracy: Up to ±3 µm (indicates the encoder's closeness to the actual displacement)
    Details
  • Encoder Technology L18B Linear Scales

    Encoder Technology L18B Linear Scales

    Features

    • Measuring length: Up to 3.240 mm
    • Accuracy: Up to ±5 µm within any meter of its measuring length
    • Grating periods: Available in two options: ±20 µm and ±40 µm
    Details
  • Encoder Technology L18T Linear Scales

    Encoder Technology L18T Linear Scales

    Features

    • Similar to the L18 series: Shares most functionalities and specifications with the L18 series encoders.
    • Different housing fixation: Requires distinct mounting methods compared to the L18 series.
    • Improved thermal behaviour: More stable performance under different temperatures.
    Details
  • Encoder Technology L23 Linear Scales

    Encoder Technology L23

    Features

    • Type: Photoelectric modular linear encoder
    • Measuring length:
      • Up to 20,000 mm (20 meters)
      • Can be even longer with special order
    • Accuracy: Up to ±3 µm
     
    Details
  • Encoder Technology L35 Linear Scales

    Encoder Technology L35 Linear Scales

    Features

    • Type: Incremental linear displacement measuring device (measures changes in position)
    • Measuring length: Up to 3.240 mm
    • Accuracy: Up to ±3 µm within any meter of its measuring length (accuracy scales with length)
    • Vibration resistance: More resistant to vibrations than the L18 series encoders
    Details
  • Encoder Technology L35T Linear Scales

    Encoder Technology L35T Linear Scales

    Features

    • Similar to the L35 series: Shares most functionalities and specifications with the L35 series encoders.
    • Different mounting parameters: Requires distinct mounting methods compared to the L35 series.
    • Measuring length: Up to 3.240 mm.
    • Enhanced vibration resistance: More resistant to vibrations than the L18 series encoders, making it suitable for applications with higher vibration levels.
     
    Details
  • Encoder Technology L37 Linear Scales

    Encoder Technology L37 Linear Scales

    Features

    • Type: Incremental encoder
    • Thermal behaviour: Reproducible, indicating stability under temperature changes
    • Reading head: Reversible for flexibility in installation
    • Measuring length: Up to 3.240 mm
    • Accuracy: Up to ±3 µm within the measuring length
    Details
  • Encoder Technology L50 Linear Scales

    Encoder Technology L50 Linear Scales

    Features

    • Type: Incremental encoder
    • Measuring length: 3.240 mm to 30.040 mm
    • Grating period: 40 µm
    • Accuracy: Up to ±10 µm within the measuring length
    Details
  • Encoder Technology LK24 Linear Scales

    Encoder Technology LK24 Linear Scales

    Features

    • Type: Photoelectric absolute linear encoder (measures absolute position)
    • Measuring length: Up to 3.240 mm (customizable)
    • Interface: SSI or BiSS serial interface for digital communication
    • Accuracy: Up to ±1 µm high accuracy
    • Optional incremental track: Provides 1Vpp incremental signal for applications requiring both absolute and incremental position data.
    Details
  • Encoder Technology MK Magnetic Linear Encoder

    Encoder Technology MK Magnetic Linear Scales

    Features

    • Magnetic absolute linear encoder
    • MK has a measuring length of up to 50.000 mm
    • Accuracy can reach up to ±35 μm.
    • Encoder has two versions of serial interface - SSI or BiSS C
    • Optionally it can have 2 analog sinusoidal signals with phase shift 90°C and amplitude approx. 1Vpp.
    Details
  • Encoder Technology MT Magnetic Linear Scales

    Encoder Technology MT Magnetic Linear Scales

    Features

    • Measuring length: Up to 50,000 mm (50 meters)
    • Accuracy: Up to ±25 micrometres (μm)
    • Customizable: Other parameters can be modified to meet specific needs
    Details
  • Encoder Technology PCMT Linear Scales

    Encoder Technology PCMT Linear Encoder

    Features

    • Converts the movement of key machine parts into electrical signals.
    • Designed for harsh industrial environments and resistant to various physical and environmental factors.
    • Magnetic band length can reach up to 50 meters.
    • Allows for either user-defined reference marks or external zero signal actuator.
    • LED on the reading head confirms reference mark detection.
    • Compressed air can be used to clean the rail surface, improving accuracy.
    • Two output signal options:
      • PCMT-F: Square-wave with built-in interpolation electronics.
      • PCMT-AV: Sinusoidal signal requiring external interpolation.
    Details

  • Motrona BY701-Firmware: Synchronization of Drives

    Features

    • MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
    • The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
    • Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
    • The number of successive axes can be extended arbitrarily via a cascading output.
    • MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
    • PROFIBUS connection possible via gateway PB251 (see accessories)
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top