+44 (0)1903 788287
Filtered (41)

  • CT701-Firmware: Eccentric Material Processing

    Features

    • MC700 is a universal motion controller for 1 to 4 axis, programmable for multiple motion applications by simple download of the corresponding function firmware
    • With the use of Matona's CT701 firmware, this unit provides excellent solutions with all kinds of guillotine cutters and rotary eccentric shears needing a cosine-compensated speed profile during the penetration of the tool
    • Extremely smooth motion  to protect  mechanical solution, by self-optimizing polynomial speed transitions
    • High cutting accuracy, even during line acceleration and at high speeds
    • Programmable cosine-compensated speed profile
    • Special torque control features to master the impact load when cutting hard materials like stainless steel etc.
    • Special profile features to avoid deadlock between tool and material
    • Embedded virtual master axis (selectable)
    • Black-box unit for cabinet mounting
    • Remote control and communication facilities via external operator terminal, serial PC communication, PROFIBUS or optional via CANBUS (MC700/CI) etc.
    Details

  • CT803-Firmware: Rotating Cross Cutters

    Features

    • 2 pulse inputs with format  A, /A, B, /B, Z, /Z [HTL, RS422]
    • With an input frequency of up to 2 MHz
    • 2 control inputs with format  SIN+, SIN-, COS+, COS- [1 Vss] with an input frequency of up to 400 kHz
    • 2 SSI inputs with format  DATA+, DATA-, CLOCK+, CLOCK- up to 25 Bit, with SSI switching frequency of 100 Hz ... 1 MHz
    • 2 scalable 14-bit analog inputs for ±10 V or 0/4 ... 20 mA
    • 4 control inputs for PNP / NPN signals [10 ... 30 VDC]
    • 4 fast interrupt inputs for PNP / NPN signals [10 ... 30 VDC]
    • 1 pulse output with format  A, /A, B, /B, Z, /Z [RS422]
    • 4 control outputs with push-pull characteristic, short-circuit-proof [5 ... 30 VDC]
    • 2 scalable 14-bit analog outputs for ±10 V or 0/4 ... 20 mA
    • Loop time approx. 250 µs
    • Power supply 18 ... 35 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • OnBoard interfaces: Ethernet / IP, RS232 / RS485, USB 2.0, CANopen, Modbus RTU
    • Optional Ethernet interfaces: EtherCAT, Ethernet / IP, Modbus TCP, Powerlink, PROFINET, SERCOS III
    • Optional Fieldbus interfaces (slave): CC-Link, DeviceNet, PROFIBUS
    • Operates with all 4-Q-drive systems, equipped with a standardized drive communication bus (e. g. SERCOS-II). Alternatively, ±10 V setpoint can be used
    • The controllers can be setup by an external operator terminal as well as HMI’s via standardized factory communication bus e.g. PROFINET
    • Setup via Windows operator software (free of charge)
    Details
  • Encoder Technology 15S Standard Shaft Incremental Encoder

    Encoder Technology 15S Standard Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—less than 25.4 mm height and 38 mm diameter
    • Extended temperature operating ranges available
    • Up to 12-pole commutation optional (for brushless motor control)
    Details
  • Encoder Technology 25SF Standard Shaft Incremental Encoder

    Encoder Technology 25SF Standard Shaft Incremental Encoder

    Features

    • Standard Size 25 package (63.5mm x 63.5mm)
    • Optical technology for high accuracy
    • Resolutions from 1 to 65,536 PPR (262,144 quadrature counts)
    • Servo and flange mounting
    • IP67 sealing available
    Details
  • Encoder Technology 702 Standard Shaft Incremental Encoder

    Encoder Technology 702 Standard Shaft Incremental Encoder

    Features

    • Standard Size 20 package (50.8mm x 50.8mm)
    • Flange and servo mounting
    • Up to 30,000 PPR
    • 35Kg maximum axial and radial shaft loading
    • IP67 sealing available
    Details
  • Encoder Technology 711 716 Standard Shaft Incremental Encoder

    Encoder Technology 711 & 716 Standard Shaft Incremental Encoder

    Features

    • The original industry-standard cube
    • Five versatile housing styles
    • Single or Quadrature output
    • New resolutions available to 10,000 PPR
    Details
  • Encoder Technology 725 Standard Shaft Incremental Encoder

    Encoder Technology 725 Standard Shaft Incremental Encoder

    Features

    • Standard Size 25 package (63.5 x 63.5)
    • Up to 30,000 PPR
    • Standard and industrial housings
    • Servo and flange mounting
    • IP67 sealing available
    Details
  • Encoder Technology 744 Standard Shaft Incremental Encoder

    Encoder Technology 744 Standard Shaft Incremental Encoders

    Features

    • Standard "444" Style, 115mm Diameter
    • Up to 30,000 PPR
    • Choice of Shaft Sizes
    • IP64 Sealing Available
    Details
  • Encoder Technology 755RG Standard Shaft Incremental Encoder

    Encoder Technology 755RG Standard Shaft Incremental Encoders

    Features

    • Miniature size (38.1mm diameter)
    • Up to 30,000 PPR
    • Servo or flange mounting
    • 1 MHz frequency response available
    • Extended temperature operating range available
    Details
  • 758 Standard Shaft Incremental Encoder

    Encoder Technology 758 Standard Shaft Incremental Encoders

    Features

    • Standard Size 58 mounting (58 mm diameter)
    • Up to 30,000 PPR
    • 36 Kg max. Axial and radial shaft loading
    • High-temperature option (100° C)
    • IP65 sealing available
    Details
  • Encoder Technology 7RP Extra heavy Duty Standard Shaft Incremental

    Encoder Technology 7RP Standard Shaft Incremental Encoder

    Features

    • Extra Heavy Duty Mechanical Assembly
    • Single Ended or Double Ended Shaft
    • Reversible Face Fixing Option
    • Incorporates Opto-ASIC Technology
    Details
  • 86A Standard Shaft Incremental Encoder

    Encoder Technology 86A Standard Shaft Incremental Encoder

    Features

    • Standard 68mm Diameter Package
    • Up to 30000 PPR, Opto-Asic Technology
    • Square Flange Mounting
    • IP65 Double O-ring Sealed
    Details
  • Encoder Technology 86F Extra Heavy Duty Standard Shaft Incremental

    Encoder Technology 86F Standard Shaft Incremental Encoder

    Features

    • Transverse Slotted Shaft
    • Up to 30000 PPR, Opto-Asic Technology
    • 90mm Round Flange with 3 x 4.5mm Dia Fixing Holes at 120° Apart on a 82mm PCD
    • Double O-ring Sealed
    Details
  • Encoder Technology A28 Standard Shaft Encoder

    Encoder Technology A28 Standard Shaft Incremental Encoder

    Features

    • Type: Photoelectric rotary encoder (converts rotational movement into electrical signals)
    • Function: Incremental (tracks changes in rotation rather than absolute position)
    • Diameter: Compact size of 28 mm
    • High resolution: Up to 25,000 output pulses per revolution (providing detailed rotational information)
    • Benefit: Well-suited for applications with limited space due to its small size
    Details
  • Encoder Technology 755RG Standard Shaft Incremental Encoder

    Encoder Technology E546 Standard Shaft Incremental Encoders

    Features

    • Miniature size (38.1mm diameter)
    • Up to 30,000 PPR
    • Servo or flange mounting
    • 1 MHz frequency response available
    • Extended temperature operating range available
    Details
  • 758 Standard Shaft Incremental Encoder

    Encoder Technology EB58 Standard Shaft Incremental Encoders

    Features

    • Standard Size 58 mounting (58 mm diameter)
    • Up to 30,000 PPR
    • 36 Kg max. Axial and radial shaft loading
    • High-temperature option (100° C)
    • IP65 sealing available
    Details
  • 758 Standard Shaft Incremental Encoder

    Encoder Technology EC58 Standard Shaft Incremental Encoders

    Features

    • Standard Size 58 mounting (58 mm diameter)
    • Up to 30,000 PPR
    • 36 Kg max. Axial and radial shaft loading
    • High temperature option (100° C)
    • IP65 sealing available
    Details
  • motrona-BG200

    Motrona BG200: Plug-in Display Unit

    Features

    • Individual scalable process or speed indicator
    • Dual channel frequency indicator for visualization of the encoder frequency
    • Display of alarm and error codes
    • Touch screen with intuitive menu guidance
    • 1.54" OLED Display (128 x 64 Pixel)
    • Dimension: 50 x 80 x 15 mm (1,97 x 3,15 x  0,59")
    Details

  • Motrona BG230: Plug-in Display and Programming Unit

    Features

    • Simple parameterization of motrona safety devices
    • Editing, saving and loading of parameters
    • Individual scalable process or speed indicator
    • Dual channel frequency indicator for visualization of the encoder frequency
    • Touch screen with intuitive menu guidance
    • 1.54" OLED Display (128 x 64 Pixel)
    • Dimension: 50 x 80 x 15 mm (1,97 x 3,15 x  0,59")
    Details

  • Motrona BY701-Firmware: Synchronization of Drives

    Features

    • MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
    • The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
    • Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
    • The number of successive axes can be extended arbitrarily via a cascading output.
    • MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
    • PROFIBUS connection possible via gateway PB251 (see accessories)
    Details
  • Motrona-DS230

    Motrona DS230: Certified Safety Monitor with Multifunctional Inputs for HTL-, RS422-, SinCos-Sensors and Signal Splitter

    Features

    • SIL3 and PLe certification
    • Safety functions equivalent to EN 61800-5-2 (SS1, SS2, SOS, SLS, SDl, SSM, SLI, SBC, STO, SMS)
    • 2 encoder inputs with format SIN+, SIN-, COS+, COS- [1 Vss]
    • 2 pulse inputs with format A, /A, B, /B [RS422]
    • 2 pulse- or control inputs with format A, B, 90° [HTL / PNP] (for rotary encoder, proximity switches or commands)
    • Input frequency up to 500 kHz
    • Forced-guided redundant output relay (NO)
    • 4 control outputs with push-pull characteristic, short-circuit-proof, [HTL], each inverse and redundant
    • Safety related 14 bit analog output for 4 ... 20 mA (scalable)
    • With signal splitter
    • Power supply 18 ... 30 V
    • Compact housing for 35 mm mounting top hat rail
    • (according to EN 60715)
    • Setup via USB port by operator software or plug-in display and programming unit BG230 (accessories)
    Details

  • Motrona DS236: Certified Safety Monitor with Multifunctional Inputs for HTL-, RS422- and SinCos-Sensors, without Signal Splitter

    Features

    • SIL3 and PLe certification
    • Safety functions equivalent to EN 61800-5-2 (SS1, SS2, SOS, SLS, SDl, SSM, SLI, SBC, STO, SMS)
    • 2 encoder inputs with format SIN+, SIN-, COS+, COS- [1 Vss]
    • 2 pulse inputs with format A, /A, B, /B [RS422]
    • 2 pulse- or control inputs with format A, B, 90° [HTL / PNP] (for rotary encoder, proximity switches or commands)
    • Input frequency up to 500 kHz
    • Forced-guided redundant output relay (NO)
    • 4 control outputs with push-pull characteristics, short-circuit-proof, [HTL], each inverse and redundant
    • Safety-related 14-bit analogue output for 4 ... 20 mA (scalable)
    • Power supply 18 ... 30 V
    • Compact housing for 35 mm mounting top-hat rail (according to EN 60715)
    • Setup via USB port by operator software or plug-in display and programming unit BG230 (accessories)
    Details
  • motrona-ds240

    Motrona DS240: Certified Safety Monitors with SinCos Encoder and Signal Splitter

    Features

    • SIL3 and PLe certification
    • Safety functions equivalent to EN 61800-5-2 (SS1, SS2, SOS, SLS, SDl, SSM, SLI, SBC, STO, SMS)
    • 2 encoder input with format SIN+, SIN-, COS+, COS- [1 Vss]
    • 2 pulse- or control inputs with format A, B, 90° [HTL / PNP] (for rotary encoder, proximity switches or commands)
    • Input frequency up to 500 kHz
    • Forced-guided redundant output relay (NO)
    • 4 control outputs with push-pull characteristic, short-circuit-proof, [HTL], each inverse and redundant
    • Safety-related 14-bit analogue output for 4 ... 20 mA (scalable)
    • With signal splitter
    • Power supply 18 ... 30 V
    • Compact housing for 35 mm mounting top hat rail (according to EN 60715)
    • Setup via USB port by operator software or plug-in display and programming unit BG230
    Details
  • Motrona-DS246

    Motrona DS246: Certified Safety Monitors with SinCos Encoder without Signal Splitter

    Features

    • SIL3/PLe certification
    • Safety functions equivalent to EN 61800-5-2 (SS1, SS2, SOS, SLS, SDl, SSM, SLI, SBC, STO, SMS)
    • 2 encoder input with format SIN+, SIN-, COS+, COS- [1 Vss]
    • 2 pulse inputs with format A, /A, B, /B [RS422]
    • 2 pulse- or control inputs with format A, B, 90° [HTL / PNP] (for rotary encoder, proximity switches or commands)
    • Input frequency up to 500 kHz
    • Forced-guided redundant output relay (NO)
    • 4 control outputs with push-pull characteristic, short-circuit-proof, [HTL], each inverse and redundant
    • Safety-related 14-bit analog output for 4 ... 20 mA (scalable)
    • Power supply 18 ... 30 V
    • Compact housing for 35 mm mounting top hat rail (according to EN 60715)
    • Setup via USB port by operator software or plug-in display and programming unit BG230
    Details
  • Motrona-DS250

    Motrona DS250: Safety Speed Monitor for Incremental Encoders / Sensors

    Features

    • SIL3 and PLe certification
    • Safety functions equivalent to EN 61800-5-2 (SS1, SS2, SOS, SLS, SDl, SSM, SLI, SBC, STO, SMS)
    • 2 incremental encoder inputs with format A, /A, B, /B, Z, /Z [HTL differencial, HTL single ended, RS422]
    • 8 control inputs [HTL / PNP]
    • Input frequency up to 500 kHz
    • 2 relay outputs 5... 250 VAC / VDC (NO)
    • 4 x 2 control outputs with push-pull characteristic, short-circuit-proof, [HTL], antivalent or equivalent redundant or simply used
    • Safety related 14 bit analog output for 4 ... 20 mA (scalable)
    • Signal splitter
    • Power supply 18 ... 30 V
    • Wire monitoring of the sensor signals
    • Compact housing for 35 mm mounting top hat rail (according to EN 60715)
    • USB interface in combination with the user interface OS6.0 for the parameterization of the safety speed monitor
    • BG200 operator panel for easy parameterization and display (optional)
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top