Skip to content
[email protected]
+44 (0)1903 788287
We offer same day delivery to the UK
and next day delivery to USA and Europe
Enquire Now
Home
Manufacturers
Deva Electronic Controls
Encoder Technology
Heidenhain
Motrona
MTL
Nemicon
Posital Fraba
Tamagawa Seiki
TWK
Products
Encoders
Absolute Encoders
Single Turn Hollow Shaft Encoders
Single Turn Standard Shaft
Multi Turn Hollow Shaft Encoders
Multi Turn Standard Shaft Encoders
Incremental Encoders
Angle Encoders
Blind Hollow Shaft Encoders
Linear Encoders
Linear Scales
Stainless Steel Encoders
Standard Shaft Encoders
Through Hollow Shaft Encoders
Special Designs
Resolvers
Tamagawa Seiki + Resolvers
Accessories
Converters/Interfaces
Counters
Indicators
Stocklist
Case Studies
Contact us
Search for:
Home
Manufacturers
Deva Electronic Controls
Encoder Technology
Heidenhain
Motrona
MTL
Nemicon
Posital Fraba
Tamagawa Seiki
TWK
Products
Encoders
Absolute Encoders
Single Turn Hollow Shaft Encoders
Single Turn Standard Shaft
Multi Turn Hollow Shaft Encoders
Multi Turn Standard Shaft Encoders
Incremental Encoders
Angle Encoders
Blind Hollow Shaft Encoders
Linear Encoders
Linear Scales
Stainless Steel Encoders
Standard Shaft Encoders
Through Hollow Shaft Encoders
Special Designs
Resolvers
Tamagawa Seiki + Resolvers
Accessories
Converters/Interfaces
Counters
Indicators
Stocklist
Case Studies
Contact us
Search for:
Reset all
×
Incremental Standard Shaft Encoders
×
Speed Monitors
×
Filtered (29)
Encoder Technology 15S Standard Shaft Incremental Encoder
Features
Very high-performance economical encoder
Low profile—less than 25.4 mm height and 38 mm diameter
Extended temperature operating ranges available
Up to 12-pole commutation optional (for brushless motor control)
Details
Encoder Technology 25SF Standard Shaft Incremental Encoder
Features
Standard Size 25 package (63.5mm x 63.5mm)
Optical technology for high accuracy
Resolutions from 1 to 65,536 PPR (262,144 quadrature counts)
Servo and flange mounting
IP67 sealing available
Details
Encoder Technology 702 Standard Shaft Incremental Encoder
Features
Standard Size 20 package (50.8mm x 50.8mm)
Flange and servo mounting
Up to 30,000 PPR
35Kg maximum axial and radial shaft loading
IP67 sealing available
Details
Encoder Technology 711 & 716 Standard Shaft Incremental Encoder
Features
The original industry-standard cube
Five versatile housing styles
Single or Quadrature output
New resolutions available to 10,000 PPR
Details
Encoder Technology 725 Standard Shaft Incremental Encoder
Features
Standard Size 25 package (63.5 x 63.5)
Up to 30,000 PPR
Standard and industrial housings
Servo and flange mounting
IP67 sealing available
Details
Encoder Technology 744 Standard Shaft Incremental Encoders
Features
Standard "444" Style, 115mm Diameter
Up to 30,000 PPR
Choice of Shaft Sizes
IP64 Sealing Available
Details
Encoder Technology 755RG Standard Shaft Incremental Encoders
Features
Miniature size (38.1mm diameter)
Up to 30,000 PPR
Servo or flange mounting
1 MHz frequency response available
Extended temperature operating range available
Details
Encoder Technology 758 Standard Shaft Incremental Encoders
Features
Standard Size 58 mounting (58 mm diameter)
Up to 30,000 PPR
36 Kg max. Axial and radial shaft loading
High-temperature option (100° C)
IP65 sealing available
Details
Encoder Technology 7RP Standard Shaft Incremental Encoder
Features
Extra Heavy Duty Mechanical Assembly
Single Ended or Double Ended Shaft
Reversible Face Fixing Option
Incorporates Opto-ASIC Technology
Details
Encoder Technology 86A Standard Shaft Incremental Encoder
Features
Standard 68mm Diameter Package
Up to 30000 PPR, Opto-Asic Technology
Square Flange Mounting
IP65 Double O-ring Sealed
Details
Encoder Technology 86F Standard Shaft Incremental Encoder
Features
Transverse Slotted Shaft
Up to 30000 PPR, Opto-Asic Technology
90mm Round Flange with 3 x 4.5mm Dia Fixing Holes at 120° Apart on a 82mm PCD
Double O-ring Sealed
Details
Encoder Technology A28 Standard Shaft Incremental Encoder
Features
Type: Photoelectric rotary encoder (converts rotational movement into electrical signals)
Function: Incremental (tracks changes in rotation rather than absolute position)
Diameter: Compact size of 28 mm
High resolution: Up to 25,000 output pulses per revolution (providing detailed rotational information)
Benefit: Well-suited for applications with limited space due to its small size
Details
Encoder Technology E546 Standard Shaft Incremental Encoders
Features
Miniature size (38.1mm diameter)
Up to 30,000 PPR
Servo or flange mounting
1 MHz frequency response available
Extended temperature operating range available
Details
Encoder Technology EB58 Standard Shaft Incremental Encoders
Features
Standard Size 58 mounting (58 mm diameter)
Up to 30,000 PPR
36 Kg max. Axial and radial shaft loading
High-temperature option (100° C)
IP65 sealing available
Details
Encoder Technology EC58 Standard Shaft Incremental Encoders
Features
Standard Size 58 mounting (58 mm diameter)
Up to 30,000 PPR
36 Kg max. Axial and radial shaft loading
High temperature option (100° C)
IP65 sealing available
Details
Motrona DZ210: Direction and Standstill Monitor
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 500 kHz
2 output relays with potential-free change-over contact (forward, reward and zero motion)
2 transistor outputs with High-Side-Driver, short-circuit-proof
Power supply 17 ... 30 VDC
Snap-on housing for top hat rail (according to EN 60715)
DIL switch for setup of input characteristic and definition of standstill
Details
Motrona DZ260: Speed Monitor with 3 Output Relays and Analog Output
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 1 MHz
3 output relays
14 Bit analog output for ±10 V or 0/4 ... 20 mA
Power supply 17 ... 30 VDC
Auxiliary voltage output +5 V for the supply of TTL encoders
Snap-on housing for top hat rail (according to EN 60715)
LCD display, backlighted
Setup via keys or via PC by serial RS232 interface
Details
Motrona DZ261: Speed Monitor with 3 Transistor Outputs and Analog Output
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 1 MHz
3 fast transistor switching outputs [PNP]
14 bit analog output for ±10 V or 0/4 ... 20 mA
Power supply 17 ... 30 VDC
Auxiliary voltage output +5 V for the supply of TTL encoders
Snap-on housing for top hat rail (according to EN 60715)
LCD display, backlighted
Setup via keys or via PC by serial RS232 interface
Details
Motrona DZ266: Speed Monitor with Analog Output
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 1 MHz
14 bit analog output for ±10 V or 0/4 ... 20 mA
Power supply 17 ... 30 VDC
Auxiliary voltage output +5 V for the supply of TTL encoders
Snap-on housing for top hat rail (according to EN 60715)
LCD display, backlighted
Setup via keys or via PC by serial RS232 interface
Details
Motrona DZ267: Speed Monitor with 3 Output Relays
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 1 MHz
3 output relays
Power supply 17 ... 30 VDC
Auxiliary voltage output +5 V for the supply of TTL encoders
Snap-on housing for top hat rail (according to EN 60715)
LCD display, backlighted
Setup via keys or via PC by serial RS232 interface
Details
Motrona DZ269: Speed Monitor with 3 Output Relays
Features
Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
Input frequency up to 1 MHz
3 output relays
Power supply 17 ... 30 VDC
Auxiliary voltage output +5 V for the supply of TTL encoders
Snap-on housing for top hat rail (according to EN 60715)
LCD display, backlighted
Setup via keys or via PC by serial RS232 interface
Details
Nemicon 12SA Incremental Encoder
Features
Ultra Miniature Size
High reliability with mounting the Opt-ASIC (by components quantities decreased)
Low torque and low inertia
High signal accuracy
Type: 12SA
Pulse: 100-256
Outer Diameter: φ12
Ingress Protection: IP00
Details
Nemicon 18M Incremental Encoder
Features
Ultra Miniature Size
Shaft Diameter of 2.5mm available
Type: 18M
Pulse: 200-1600
Outer Diameter: φ18
Details
Nemicon 18S Incremental Encoder
Features
Ultra Miniature Size
A shaft Diameter of 2.5mm is available
Type: 18S
Pulse: 100-1600
Outer Diameter: φ18
Ingress Protection: IP50
Details
Nemicon 38H Incremental Encoder
Features
Compact size for general purpose
Type: 38H
Pulse: 100-4096
Outer Diameter: φ38
Ingress Protection: IP50
Details
1
2
Next
Close product quick view
×
Title
Page load link
Go to Top