+44 (0)1903 788287
Filtered (24)

  • Motrona DM350: touchMATRIX® Strain Gauge Indicator for force sensors (full bridge)

    Features

    • Strain gauge input, 6-wire connection
    • Input pt100 and thermocouples (J and K)
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • Adjustable bridge voltage 3 VDC to 10 VDC
    • 1 … 10 mV sensitivity
    • Standard installation housing with 96 x 48 mm and protection class IP65
    • Bright and high-contrast graphic display with event-dependent color variants
    • Emulation of a 7-segment display with symbols and units
    • Intuitive and simple parameterization through plain text and touchscreen
    • Numerous functions such as tare, filter, averaging
    • Linearization with 24 support points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    • Option IO: IO-Link Device V1.1
    Options can be combined.
    Details
  • motrona-DZ210

    Motrona DZ210: Direction and Standstill Monitor

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 500 kHz
    • 2 output relays with potential-free change-over contact (forward, reward and zero motion)
    • 2 transistor outputs with High-Side-Driver, short-circuit-proof
    • Power supply 17 ... 30 VDC
    • Snap-on housing for top hat rail (according to EN 60715)
    • DIL switch for setup of input characteristic and definition of standstill
    Details

  • Motrona DZ260: Speed Monitor with 3 Output Relays and Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • 14 Bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ261: Speed Monitor with 3 Transistor Outputs and Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 fast transistor switching outputs [PNP]
    • 14 bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ266: Speed Monitor with Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 14 bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ267: Speed Monitor with 3 Output Relays

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ269: Speed Monitor with 3 Output Relays

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details
  • Tamagawa Seiki Hollowshaft Encoder

    Tamagawa Hollowshaft Encoder OIH48 Series TS5207N356

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki Hollowshaft Encoder

    Tamagawa Hollowshaft Encoder OIH48 Series TS5207N500

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki Hollowshaft Encoder

    Tamagawa Hollowshaft Encoder OIH48 Series TS5207N530

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5208N305 Hollowshaft Encoder OIH48 Series

    Tamagawa Hollowshaft Encoder OIH48 Series TS5208N305

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5207N510 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki Hollowshaft Encoder OIH48 Series TS5207N510

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5207N510 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5207N510 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5208N530 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5208N530 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5208N530 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5208N530 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5212N397 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5212N397 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5212N510 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5212N510 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5213N530 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5213N530 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5213N550 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5213N550 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5213N551 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5213N551 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5213N551 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5214N510 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5214N530 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5214N530 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5217N530 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5217N530 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • TS5207N500 Tamagawa Hollowshaft Encoder OIH48 Series

    Tamagawa Seki TS5207N500 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top