+44 (0)1903 788287
Filtered (27)
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15H Blind Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 15T Through Hollow shaft encoder

    Encoder Technology 15T Through Hollow Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—25.4 mm height and 38 mm diameter
    • Thru-bore with sizes up to 10 mm
    • Simple, innovative flex mounting system (Global Mounting Standards)
    • Up to 12 pole commutation optional for brushless motor control
    Details
  • Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Features

    • 5mm Opto-ASIC encoder with a low profile (50.8mm)
    • Imperial bore sizes range from 0.625” to 1.125”
    • Metric bore sizes ranging from 6 mm to 28 mm
    • Single replacement solution for 50.8mm to 88.9mm encoders
    • Resolutions to 10,000 PPR, frequencies to 1 MHz
    • Versatile flexible mounting options
    • RoHS compliant
    • Corrosion-Resistant Option
    Details
  • Encoder Technology 260 Through hollow shaft Incremental encoder

    Encoder Technology 260 Through Hollow Shaft Incremental Encoder

    Features

    • Low profile 30.3mm
    • Up to 12 pole commutation
    • Thru-bore and hollow-bore (blind) styles
    • Simple, innovative flexible mounting system
    • Incorporates Opto-ASIC technology
    Details
  • Encoder Technology 75HA Through HolIow Shaft Incremental Encoder

    Encoder Technology 75HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 2Ncm (typical)
    • Inertia: 100gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 75HS-Hollow shaft incremental Encoder

    Encoder Technology 75HS Through Hollow Shaft Incremental Encoder

    Features

    • Body: Stainless Steel (316)
    • Cover: Stainless Steel (316)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing + Single lip seal
    • Rear: Single lip seal on the rear of the cover
    • Protection: (IP66 / IP67)
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM
    • Torque: 4Ncm (typical)
    • Inertia: 200gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Features

    • Size 25 / 63.5mm Diameter (Hollow Shaft)
    • Up to 12 Pole Commutation Available
    • Thru Bore and Blind Bore Options
    • Simple, Innovative Flexible Mounting System
    • Incorporates Opto-ASIC Technology
     
    Details
  • Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Encoder Technology 775 Through Hollow Shaft Incremental Encoder

    Features

    • Thru-bore design for easy mounting
    • Bore options to 1.375" and 32mm
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • 100° C operating temperature available
    Details
  • Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Encoder Technology 776 Through Hollow Shaft Incremental Encoder

    Features

    • Slim profile—only 34.5mm in depth
    • Thru-bore design for easy mounting
    • Incorporates Opto-ASIC technology
    • Resolutions to 4096 PPR
    • Bore options to 1.875" and 43mm
    Details
  • Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Encoder Technology 90HA Through Hollow Shaft Incremental Encoder

    Features

    • Body: Precision Machined Aluminium
    • Cover: Precision Machined Aluminium (Powder Coated)
    • Shaft: Stainless Steel
    • Bearings: Ballraces
    • Shaft Sealing: Front: Sealed bearing
    • Rear: Single lip seal on the rear of the cover
    • Protection: IP65
    • Operating Temp: -20 to +60°C (Higher on request)
    • Maximum Speed: 3000 RPM (Higher on request)
    • Torque: 3Ncm (typical)
    • Inertia: 600gcm2 (typical)
    • Shaft Loading: Designed to support its weight
    • Cable: Screened, oil and salt waterproof
    • Impulse Frequency: Up to 300KHz (depending on model)
    • Current Consumption: 60mA (typical – without load)
    Details
  • Encoder Technology 925 Single Turn Standard Shaft Absoulte Encoder

    Encoder Technology 925 Single Turn Standard Shaft Absolute Encoder

    Features

    • Standard Size 25 package (2.5")
    • Resolutions up to 12-bit (4096 counts)
    • Incorporates Opto-ASIC technology
    • Industrial-grade, heavy-duty housing
    • Optional IP67 seal
    Details
  • Encoder Technology 960 Single Turn Hollow Shaft Absolute Encoder

    Encoder Technology 960 Single Turn Hollow Shaft Absolute Encoder

    Features

    • Low profile—40mm
    • Thru-bore or hollow-bore styles
    • Industrial-grade, heavy-duty housing
    • State-of-the-art Opto-ASIC circuitry
    Details
  • Encoder Technology A102H Large Bore Encoder

    Encoder Technology A102H Large Bore Through Hollow Shaft Encoder

    Features

    • Number of output pulses per revolution 5.000 - 500.000 ppr
    • Line number on disc (z) 5.000
    • Maximum shaft speed 8000 rpm
    • The permissible motion of the shaft - axial: ± 1.00 mm - radial: 0.02 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
    • Starting torque at 20°C ≤ 0.01 Nm
    • Rotor moment of inertia < 20x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.8 kg
    • Operating temperature -20...+70°C
    • Storage temperature -30...+85°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (11 ms) ≤ 300m/s²
    Details
  • Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Features

    • Number of output pulses per revolution 100-108000 ppr
    • Maximum shaft speed 10000 rpm
    • The permissible motion of the shaft - axial: ± 0.5 mm - radial: ± 0.05 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
    • Starting torque at 20°C ≤ 0.025 Nm
    • Rotor moment of inertia < 1.5x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.3 kg
    • Operating temperature -10...+70°C
    • Storage temperature -30...+80°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (5 ms) ≤ 1000 m/s²
    Details
  • Encoder Technology MA36H Muti-turn Hollowshaft Encoder

    Encoder Technology MA36H

    Features

    • Standard Size 36mm package (1.42")
    • Durable magnetic technology
    • Multiturn absolute encoder (12-bit/39-bit)
    • SSI and CANopen communications
    • Proven new turns counting technology — no gears or batteries
    Details
  • Encoder Technology MA36S Muti-turn Standard Shaft Encoder

    Encoder Technology MA36S Muti-turn Standard Shaft Absolute Encoder

    Features

    • Standard Size 36mm package (1.42")
    • Durable magnetic technology
    • Multiturn absolute encoder (12-bit/39-bit)
    • SSI and CANopen communications
    • Proven new turns counting technology — no gears or batteries
    Details
  • Encoder Technology MA58H Series Multi Turn Hollowshaft Absolute

    Encoder Technology MA58H Series Multi Turn Hollowshaft Absolute Encoder

    Features

    • Multi-Turn Absolute Encoder (14 Bit/39 Bit)
    • SSI and CANopen Communications
    • 58 mm Diameter
    • Durable Magnetic Technology
    • Proven Turns Counting Technology – No Gears or Batteries
    • Retains Absolute Position After a Power Outage
    Details
  • Encoder Technology SA36H Single Turn Hollow Shaft Encoder

    Encoder Technology SA36H Single Turn Hollow Shaft Absolute Encoder

    Features

    • Standard Size 36mm package
    • Durable magnetic technology
    • Up to 14 bits of single-turn resolution
    • SSI and CANopen communications
    • Proven turns counting technology—no gears or batteries
    • Flex mount eliminates couplings and is ideal for motors or shafts
    Details
  • Encoder Technology SA36S Single Turn Standard Shaft Absolut

    Encoder Technology SA36S Single Turn Standard Shaft Absolute Encoder

    Features

    • Standard size 36 mm package (1.42")
    • Durable magnetic technology
    • Up to 14 bits of single-turn resolution
    • SSI and CANopen communications
    • Proven new turns counting technology — no gears or batteries
    Details
  • Encoder Technology SA58H Single Turn Hollow Shaft Absolute Encoder

    Encoder Technology SA58H Single Turn Hollow Shaft Absolute Encoder

    Features

    • Up to 14 Bits of Single-Turn Resolution
    • SSI and CANopen Communications
    • 58 mm Diameter
    • Durable Magnetic Technology
    • Retains Absolute Position After a Power Outage
    Details
  • Encoder Technology TBX36 Standard Shaft Absolute Encoder

    Encoder Technology TBX36 Single Turn Standard Shaft Absolute Encoders

    Features

    • Robust aluminium or stainless steel housing (wall thicknesses up to 5 mm)
    • Stainless steel shaft and ball bearing - ball bearing with Simmer ring
    • Rotor with shaft and permanent magnet mounted in pre-chamber
    • Sensor circuit consisting of ASIC
    • Hall elements and interface electronics in enclosed main chamber
    • Housing protection type IP 69K additionally cast
    • Electrical connection via cable (open cable ends)
    Details
  • Encoder Technology SA36S Single Turn Standard Shaft Absolut

    Encoder Technology TBX42 Single Turn Standard Shaft Absolute Encoder

    Features

    • Interface: SSI
    • Design: 42mm
    • Housing Material: Aluminium, stainless steel
    • Flange & Shaft: Synchroniser flange
    • Resolution: 4096 steps/360°<)
    • Code type: Binary, Gray (optional)
    • Electrical connection: Cable 1m
    • Electrical and/or mechanical variant: Basic version
    Details

  • Encoder Technology TBX50 Single Turn Standard Shaft Absolute Encoder

    Features

    • Robust aluminium or stainless steel housing (wall thicknesses up to 5 mm)
    • Stainless steel shaft and ball bearing - ball bearing with Simmer ring
    • Rotor with shaft and permanent magnet mounted in pre-chamber
    • Sensor circuit consisting of ASIC
    • Hall elements and interface electronics in enclosed main chamber
    • Housing protection type IP 69K additionally cast
    • Electrical connection via cable (open cable ends)
    Details

  • Motrona FM210: Frequency Multiplier / Frequency Divider

    Features

    • Pulse input with format A, B, Z [HTL single-ended, TTL single-ended] or A, /A, B, /B, Z, /Z [RS422, HTL differential]
    • 4 control inputs for HTL, PNP signals [10 ... 30 VDC]
    • Input and output frequency up to 1 MHz
    • 3 incremental outputs with format A, /A, B, /B, Z, /Z, Push-Pull, [8 … 29 VDC]
    • Power supply 9 ... 30 VDC
    • Snap-on housing for top-hat rail (acc. EN 60715)
    • Multiplier/divisor adjustable as quotient F1 / F2
    • Multiplication/division without cumulative residual errors
    • Additional functions such as jog, trim, offset and reference
    Details

  • Motrona FM260: Programmable Pulse and Frequency Multiplier

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B, Z, /Z [RS422]
    • 4 control inputs for PNP signals [10 ... 30 VDC]
    • Input and output frequency up to 1 MHz
    • Pulse output with format A, /A, B, /B, Z, /Z and push-pull characteristic, [5 ... 30 VDC]
    • Power supply 11 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • LCD backlighted
    • Setup via keys, RS232
    • The device multiplies an incoming frequency by a proportional factor F1 and a reciprocal factor F2. The two factors F1 and F2 are adjustable in the range of 0.0005 to 9.9999
    • All operation modes provide error-free frequency conversion, with full consideration of the A / B phase and direction of the quadrature signals, therefore no cumulative errors, even with continuous changes of directions and vibrations
    • Zero pulse generator: the frequency multiplier generates at the output an index signal with an adjustable pulse interval, which can be synchronized as needed with the zero pulse at the input
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top