+44 (0)1903 788287
Filtered (69)
  • 011-3INC-PCI 3 Axis PCI Incremental Encoder Interface

    Deva Electronic Controls 3 Axis PCI Incremental Encoder Interface

    Features

    • 3 x 32-bit 10MHz position registers
    • Marker input for each channel
    • Fully featured, Renishaw probe input
    • Synchronisation and triggering facilities
    • 48 configurable digital IO
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • ±5v& ±12v fused encoder supplies
    • 32-bit PCI 2.2 Plug 'n' Play compatible
    • Support & demonstration software
    **We can offer same day delivery within the UK. Next day delivery to many European countries and the USA.
    Details
  • 037-3INC-REN-USB 3 Axis USB Incremental Encoder Interface

    Deva Electronic Controls 3 Axis USB Incremental Encoder Interface

    Features

    • 3 x 32 bit 10Mhz position registers
    • Marker input for each channel
    • Fully featured Renishaw probe input
    • Dual input optical edge detector system
    • Differential or single ended inputs
    • 3 stage digital input filters
    • USB 2.0 plug and play compatible
    • Comprehensive user manual
    • Support & demonstration software on USB
    • Windows XP/7/8/10 32 and 64 bit
    **We can offer same day delivery within the UK. Next day delivery to many European countries and the USA.
    Details
  • Deva Electronics 037-3INC-REN-USB-E1 3 Axis USB Incremental Encoder Interface with power supply

    Deva Electronic Controls 3 Axis USB Incremental Encoder Interface with power supply

    Features

    • 3 x 32 bit 10Mhz position registers
    • Marker input for each channel
    • Fully featured Renishaw probe input
    • Dual input optical edge detector system
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • USB 2.0 plug-and-play compatible
    • Comprehensive user manual
    • Support & demonstration software on USB
    • Windows XP/7/8/10 32 and 64-bit
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
    Details

  • Deva Electronic Controls 3 Axis USB Incremental Encoder Interface without power supply

    Features

    • 3 x 32 bit 10Mhz position registers
    • Marker input for each channel
    • Fully featured Renishaw probe input
    • Dual input optical edge detector system
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • USB 2.0 plug-and-play compatible
    • Comprehensive user manual
    • Support & demonstration software on USB
    • Windows XP/7/8/10 32 and 64-bit
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
    Details
  • 001-4SSI-IO-PCIE 4 Axis PCI Express Absolute SSI Encoder Interface

    Deva Electronic Controls 4 Axis PCI Express Absolute SSI Encoder Interface

    Features

    • 4 x 32-bit position registers
    • Programmable data & scan rates
    • Programmable bit length
    • Synchronisation and triggering facilities
    • 48 configurable digital IO
    • Power fail/parity detection
    • Gray/binary formats
    • ±5v & ±12v fused encoder supplies
    • x1 PCIe 2.0 Plug 'n' Play compatible
    • Support & demonstration software USB
    **We can offer same day delivery within the UK. Next day delivery to many European countries and the USA.
    Details
  • 001-3SSI-PCI 3 Axis PCI Absolute SSI Encoder Interface

    Deva Electronic Controls 4 Axis PCI Express Incremental Encoder Interface

    Features

    • 4 x 32 40Mhz position registers
    • Marker input for each channel
    • Fully featured, Renishaw probe input
    • Synchronisation and triggering facilities
    • 48 configurable digital IO
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • ±5v& ±12v fused encoder supplies
    • x1 PCIe 2.0 plug-and-play compatible
    • Comprehensive user manual
    • Support & demonstration software
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
    Details
  • 018-1SIN Single Axis Sinewave Interpolator

    Deva Electronic Controls Single Axis Sinewave Interpolator

    Features:

    • Selectable interpolation factor 10, 25, 50, 100
    • Accepts 11µA or 1vpp or 2Vpp signals
    • Handles marker/index channel
    • Maximum input frequency 125kHz
    • Maximum output frequency 5MHz
    • Extremely small form factor
    • RS422 line driver output
    • Fully synchronous operation
    • +5v operation
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
    Details

  • Motrona AX020: Process Indicator for Analog Signals

    Features

    • Scalable 14-bit analog input for 0 ... 10 V or 0/4 ... 20 mA
    • Power supply 24 VDC
    • Miniature norm panel housing
    • 5 digits LED display with 8 mm height
    • Display range -19999 ... 99999, adjustable zero and full-scale value
    • Latch input to freeze the display, minimum/maximum record memory
    • Easy to set up with only two front keys and menu support
    • Delivery includes adapter frame for 50 x 25 mm cut out and label set with dimensions
    • Front dimension 48 x 24 x 59 mm (1.89 x 0.945 x 2.322")
    Details
  • Motrona TouchMatrix AX350 process display

    Motrona AX350: touchMATRIX® Process Indicator with two 16 bit Analog Inputs

    Features

    • 2 universal 16-bit analogue inputs for ±10 V or 0/4 … 20 mA
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • 24 V auxiliary output for encoder supply
    • High accuracy reference output 10 V for potentiometers > 1 kOhm
    • 3.78 x 1.89-inch norm panel housing and IP65 protection
    • Bright and high-contrast display with event-dependent color variations
    • Emulation of a 7-segment display inclusively icons and units
    • Intuitive and easy parameterization by plain text and touchscreen
    • Operating modes for visualization of INPUT 1, INPUT 2 or combinations of IN1 + IN2, IN1 - IN2, IN1 x IN2, IN1: IN2
    • Numerous features, e. g. tara, filters, averaging
    • Linearization with 24 control points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    • Option IO: IO-Link Device V1.1
    Details

  • Motrona CI700: CAN-Bus Interface

    Features

    Processor:
    • Siemens C515C operating at 10 MHz
    Power supply:
    • Using internal power of the motion controller
    CAN Communication:
    • DIN ISO 11898
    • CANopen (CiA DS301)
    Baud rates:
    • 10, 20, 50, 125, 250, 500, 1000 kBit/s (adjustable)
    Details

  • Motrona CI800: CANopen Interface Module

    Features

    • Internal power supply 3,3 V
    • Ambient temperature 0° C ... +60° C / 32° F ... 140° F (operating), -40° C ... +70° C / -40° F ... 158° F (storage)
    • 10, 20, 50, 100, 125, 250, 500, 800 und 1000 kbps Baud rates
    • SUB-D-9-pin male, galvanically isolated
    Details

  • Motrona DM221: Strain Gauge Amplifier >>> Analog

    Features

    • 6-wire connection for one strain gauge full bridge sensor
    • 4 control inputs [HTL/PNP]
    • 1 analog output ±10 V, 0/4 ... 20 mA, 16 bit
    • 4 control outputs for signalling different operation states
    • Power supply 18 ... 30 VDC
    • Functions for scaling and linking the sensor signals (e.g. A+B, A-B, ...)
    • Adjustable bridge voltage per sensor from 3 VDC ... 10 VDC
    • Sensitivity of the sensor inputs 1 ... 10 mV
    • Transmission of the sensor data via RS485
    • Programming via USB and the user interface OS (freeware)
    • Protection class IP20
    • Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
    Details

  • Motrona DM222: 2 channel Strain Gauge Amplifier >>> Analog

    Features

    • 6-wire connection for two independent strain gauge full bridge sensors
    • 4 control inputs [HTL/PNP]
    • 2 independent analog outputs ±10 V, 0/4 ... 20 mA, 16 bit
    • 4 control outputs for signalling different operation states
    • Power supply 18 ... 30 VDC
    • Functions for scaling and linking the sensor signals (e.g. A+B, A-B, ...)
    • Adjustable bridge voltage per sensor from 3 VDC ... 10 VDC
    • Sensitivity of the sensor inputs 1 ... 10 mV
    • Transmission of the sensor data via RS485
    • Programming via USB and the user interface OS (freeware)
    • Protection class IP20
    • Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
    Details
  • motrona-DZ210

    Motrona DZ210: Direction and Standstill Monitor

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 500 kHz
    • 2 output relays with potential-free change-over contact (forward, reward and zero motion)
    • 2 transistor outputs with High-Side-Driver, short-circuit-proof
    • Power supply 17 ... 30 VDC
    • Snap-on housing for top hat rail (according to EN 60715)
    • DIL switch for setup of input characteristic and definition of standstill
    Details

  • Motrona DZ260: Speed Monitor with 3 Output Relays and Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • 14 Bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ261: Speed Monitor with 3 Transistor Outputs and Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 fast transistor switching outputs [PNP]
    • 14 bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ266: Speed Monitor with Analog Output

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 14 bit analog output for ±10 V or 0/4 ... 20 mA
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ267: Speed Monitor with 3 Output Relays

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona DZ269: Speed Monitor with 3 Output Relays

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
    • Input frequency up to 1 MHz
    • 3 output relays
    • Power supply 17 ... 30 VDC
    • Auxiliary voltage output +5 V for the supply of TTL encoders
    • Snap-on housing for top hat rail (according to EN 60715)
    • LCD display, backlighted
    • Setup via keys or via PC by serial RS232 interface
    Details

  • Motrona ET224: Expansion Module for GV series with Potential Separation, 4 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 4 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 34 x 118 x 140 mm (1,34 x 4,65 x 5,51")
    Details

  • Motrona ET228: Expansion Module for GV series with Potential Separation, 8 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 8 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 54 x 118 x 140 mm (2,13 x 4,65 x 5,51")
    Details

  • Motrona EV224: Expansion Module for GV series without Potential Separation, 4 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 4 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 34 x 118 x 140 mm (1,34 x 4,65 x 5,51")
    Details

  • Motrona EV228: Expansion Module for GV series without Potential Separation, 8 Outputs

    Features

    • Input frequency up to 500 kHz with HTL or 1 MHz with RS422 / TTL
    • 8 pulse outputs, formats correspond to those of the input signals, but with individual assignment of the output level for each output
    • BUS interface for quick and easy connection of the modules
    • Power supply 10 ... 30 VDC
    • Signal delay time 160 ns
    • Input level at RS422 / TTL (differential voltage > 0.5 V),
    • Input level at HTL differential (differential voltage > 2 V),
    • Input level at HTL asymmetric low: 0 ... 6 V, high: 8 ... 40 V
    • Input level at TTL (asymmetrical): LOW < 0.8 V, HIGH >2.0 V
    • Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
    • Dimensions W x H x D = 54 x 118 x 140 mm (2,13 x 4,65 x 5,51")
    Details

  • Motrona FM210: Frequency Multiplier / Frequency Divider

    Features

    • Pulse input with format A, B, Z [HTL single-ended, TTL single-ended] or A, /A, B, /B, Z, /Z [RS422, HTL differential]
    • 4 control inputs for HTL, PNP signals [10 ... 30 VDC]
    • Input and output frequency up to 1 MHz
    • 3 incremental outputs with format A, /A, B, /B, Z, /Z, Push-Pull, [8 … 29 VDC]
    • Power supply 9 ... 30 VDC
    • Snap-on housing for top-hat rail (acc. EN 60715)
    • Multiplier/divisor adjustable as quotient F1 / F2
    • Multiplication/division without cumulative residual errors
    • Additional functions such as jog, trim, offset and reference
    Details

  • Motrona FM260: Programmable Pulse and Frequency Multiplier

    Features

    • Pulse input with format A, B, 90° [HTL] or A, /A, B, /B, Z, /Z [RS422]
    • 4 control inputs for PNP signals [10 ... 30 VDC]
    • Input and output frequency up to 1 MHz
    • Pulse output with format A, /A, B, /B, Z, /Z and push-pull characteristic, [5 ... 30 VDC]
    • Power supply 11 ... 30 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • LCD backlighted
    • Setup via keys, RS232
    • The device multiplies an incoming frequency by a proportional factor F1 and a reciprocal factor F2. The two factors F1 and F2 are adjustable in the range of 0.0005 to 9.9999
    • All operation modes provide error-free frequency conversion, with full consideration of the A / B phase and direction of the quadrature signals, therefore no cumulative errors, even with continuous changes of directions and vibrations
    • Zero pulse generator: the frequency multiplier generates at the output an index signal with an adjustable pulse interval, which can be synchronized as needed with the zero pulse at the input
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top