+44 (0)1903 788287
Filtered (98)

  • CT701-Firmware: Eccentric Material Processing

    Features

    • MC700 is a universal motion controller for 1 to 4 axis, programmable for multiple motion applications by simple download of the corresponding function firmware
    • With the use of Matona's CT701 firmware, this unit provides excellent solutions with all kinds of guillotine cutters and rotary eccentric shears needing a cosine-compensated speed profile during the penetration of the tool
    • Extremely smooth motion  to protect  mechanical solution, by self-optimizing polynomial speed transitions
    • High cutting accuracy, even during line acceleration and at high speeds
    • Programmable cosine-compensated speed profile
    • Special torque control features to master the impact load when cutting hard materials like stainless steel etc.
    • Special profile features to avoid deadlock between tool and material
    • Embedded virtual master axis (selectable)
    • Black-box unit for cabinet mounting
    • Remote control and communication facilities via external operator terminal, serial PC communication, PROFIBUS or optional via CANBUS (MC700/CI) etc.
    Details

  • CT803-Firmware: Rotating Cross Cutters

    Features

    • 2 pulse inputs with format  A, /A, B, /B, Z, /Z [HTL, RS422]
    • With an input frequency of up to 2 MHz
    • 2 control inputs with format  SIN+, SIN-, COS+, COS- [1 Vss] with an input frequency of up to 400 kHz
    • 2 SSI inputs with format  DATA+, DATA-, CLOCK+, CLOCK- up to 25 Bit, with SSI switching frequency of 100 Hz ... 1 MHz
    • 2 scalable 14-bit analog inputs for ±10 V or 0/4 ... 20 mA
    • 4 control inputs for PNP / NPN signals [10 ... 30 VDC]
    • 4 fast interrupt inputs for PNP / NPN signals [10 ... 30 VDC]
    • 1 pulse output with format  A, /A, B, /B, Z, /Z [RS422]
    • 4 control outputs with push-pull characteristic, short-circuit-proof [5 ... 30 VDC]
    • 2 scalable 14-bit analog outputs for ±10 V or 0/4 ... 20 mA
    • Loop time approx. 250 µs
    • Power supply 18 ... 35 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • OnBoard interfaces: Ethernet / IP, RS232 / RS485, USB 2.0, CANopen, Modbus RTU
    • Optional Ethernet interfaces: EtherCAT, Ethernet / IP, Modbus TCP, Powerlink, PROFINET, SERCOS III
    • Optional Fieldbus interfaces (slave): CC-Link, DeviceNet, PROFIBUS
    • Operates with all 4-Q-drive systems, equipped with a standardized drive communication bus (e. g. SERCOS-II). Alternatively, ±10 V setpoint can be used
    • The controllers can be setup by an external operator terminal as well as HMI’s via standardized factory communication bus e.g. PROFINET
    • Setup via Windows operator software (free of charge)
    Details
  • Encoder Technology 15S Standard Shaft Incremental Encoder

    Encoder Technology 15S Standard Shaft Incremental Encoder

    Features

    • Very high-performance economical encoder
    • Low profile—less than 25.4 mm height and 38 mm diameter
    • Extended temperature operating ranges available
    • Up to 12-pole commutation optional (for brushless motor control)
    Details
  • Encoder Technology 25SF Standard Shaft Incremental Encoder

    Encoder Technology 25SF Standard Shaft Incremental Encoder

    Features

    • Standard Size 25 package (63.5mm x 63.5mm)
    • Optical technology for high accuracy
    • Resolutions from 1 to 65,536 PPR (262,144 quadrature counts)
    • Servo and flange mounting
    • IP67 sealing available
    Details
  • Encoder Technology 702 Standard Shaft Incremental Encoder

    Encoder Technology 702 Standard Shaft Incremental Encoder

    Features

    • Standard Size 20 package (50.8mm x 50.8mm)
    • Flange and servo mounting
    • Up to 30,000 PPR
    • 35Kg maximum axial and radial shaft loading
    • IP67 sealing available
    Details
  • Encoder Technology 711 716 Standard Shaft Incremental Encoder

    Encoder Technology 711 & 716 Standard Shaft Incremental Encoder

    Features

    • The original industry-standard cube
    • Five versatile housing styles
    • Single or Quadrature output
    • New resolutions available to 10,000 PPR
    Details
  • Encoder Technology 725 Standard Shaft Incremental Encoder

    Encoder Technology 725 Standard Shaft Incremental Encoder

    Features

    • Standard Size 25 package (63.5 x 63.5)
    • Up to 30,000 PPR
    • Standard and industrial housings
    • Servo and flange mounting
    • IP67 sealing available
    Details
  • Encoder Technology 744 Standard Shaft Incremental Encoder

    Encoder Technology 744 Standard Shaft Incremental Encoders

    Features

    • Standard "444" Style, 115mm Diameter
    • Up to 30,000 PPR
    • Choice of Shaft Sizes
    • IP64 Sealing Available
    Details
  • Encoder Technology 755RG Standard Shaft Incremental Encoder

    Encoder Technology 755RG Standard Shaft Incremental Encoders

    Features

    • Miniature size (38.1mm diameter)
    • Up to 30,000 PPR
    • Servo or flange mounting
    • 1 MHz frequency response available
    • Extended temperature operating range available
    Details
  • 758 Standard Shaft Incremental Encoder

    Encoder Technology 758 Standard Shaft Incremental Encoders

    Features

    • Standard Size 58 mounting (58 mm diameter)
    • Up to 30,000 PPR
    • 36 Kg max. Axial and radial shaft loading
    • High-temperature option (100° C)
    • IP65 sealing available
    Details
  • Encoder Technology 7RP Extra heavy Duty Standard Shaft Incremental

    Encoder Technology 7RP Standard Shaft Incremental Encoder

    Features

    • Extra Heavy Duty Mechanical Assembly
    • Single Ended or Double Ended Shaft
    • Reversible Face Fixing Option
    • Incorporates Opto-ASIC Technology
    Details
  • 86A Standard Shaft Incremental Encoder

    Encoder Technology 86A Standard Shaft Incremental Encoder

    Features

    • Standard 68mm Diameter Package
    • Up to 30000 PPR, Opto-Asic Technology
    • Square Flange Mounting
    • IP65 Double O-ring Sealed
    Details
  • Encoder Technology 86F Extra Heavy Duty Standard Shaft Incremental

    Encoder Technology 86F Standard Shaft Incremental Encoder

    Features

    • Transverse Slotted Shaft
    • Up to 30000 PPR, Opto-Asic Technology
    • 90mm Round Flange with 3 x 4.5mm Dia Fixing Holes at 120° Apart on a 82mm PCD
    • Double O-ring Sealed
    Details
  • Encoder Technology A28 Standard Shaft Encoder

    Encoder Technology A28 Standard Shaft Incremental Encoder

    Features

    • Type: Photoelectric rotary encoder (converts rotational movement into electrical signals)
    • Function: Incremental (tracks changes in rotation rather than absolute position)
    • Diameter: Compact size of 28 mm
    • High resolution: Up to 25,000 output pulses per revolution (providing detailed rotational information)
    • Benefit: Well-suited for applications with limited space due to its small size
    Details
  • Encoder Technology 755RG Standard Shaft Incremental Encoder

    Encoder Technology E546 Standard Shaft Incremental Encoders

    Features

    • Miniature size (38.1mm diameter)
    • Up to 30,000 PPR
    • Servo or flange mounting
    • 1 MHz frequency response available
    • Extended temperature operating range available
    Details
  • 758 Standard Shaft Incremental Encoder

    Encoder Technology EB58 Standard Shaft Incremental Encoders

    Features

    • Standard Size 58 mounting (58 mm diameter)
    • Up to 30,000 PPR
    • 36 Kg max. Axial and radial shaft loading
    • High-temperature option (100° C)
    • IP65 sealing available
    Details
  • 758 Standard Shaft Incremental Encoder

    Encoder Technology EC58 Standard Shaft Incremental Encoders

    Features

    • Standard Size 58 mounting (58 mm diameter)
    • Up to 30,000 PPR
    • 36 Kg max. Axial and radial shaft loading
    • High temperature option (100° C)
    • IP65 sealing available
    Details

  • Motrona AX020: Process Indicator for Analog Signals

    Features

    • Scalable 14-bit analog input for 0 ... 10 V or 0/4 ... 20 mA
    • Power supply 24 VDC
    • Miniature norm panel housing
    • 5 digits LED display with 8 mm height
    • Display range -19999 ... 99999, adjustable zero and full-scale value
    • Latch input to freeze the display, minimum/maximum record memory
    • Easy to set up with only two front keys and menu support
    • Delivery includes adapter frame for 50 x 25 mm cut out and label set with dimensions
    • Front dimension 48 x 24 x 59 mm (1.89 x 0.945 x 2.322")
    Details
  • Motrona TouchMatrix AX350 process display

    Motrona AX350: touchMATRIX® Process Indicator with two 16 bit Analog Inputs

    Features

    • 2 universal 16-bit analogue inputs for ±10 V or 0/4 … 20 mA
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • 24 V auxiliary output for encoder supply
    • High accuracy reference output 10 V for potentiometers > 1 kOhm
    • 3.78 x 1.89-inch norm panel housing and IP65 protection
    • Bright and high-contrast display with event-dependent color variations
    • Emulation of a 7-segment display inclusively icons and units
    • Intuitive and easy parameterization by plain text and touchscreen
    • Operating modes for visualization of INPUT 1, INPUT 2 or combinations of IN1 + IN2, IN1 - IN2, IN1 x IN2, IN1: IN2
    • Numerous features, e. g. tara, filters, averaging
    • Linearization with 24 control points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    • Option IO: IO-Link Device V1.1
    Details

  • Motrona AX350/IO: touchMATRIX® IO-Link Indicator

    Features

    • 2 universal 16-bit analog inputs for ±10 V or 0/4 … 20 mA
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • 24 V auxiliary output for encoder supply
    • High accuracy reference output 10 V for potentiometers > 1 kOhm
    • 3.78 x 1.89-inch norm panel housing and IP65 protection
    • Bright and high-contrast display with event-dependent color variations
    • Emulation of a 7-segment display inclusively icons and units
    • Intuitive and easy parameterization by plain text and touchscreen
    • Operating modes for visualization of INPUT 1, INPUT 2 or combinations of IN1 + IN2, IN1 - IN2, IN1 x IN2, IN1: IN2
    • Numerous features, e. g. Ttara, filters, averaging
    • Linearization with 24 control points

    Option IO (= IO-Link Device)

    • Data transfer via COM3 (230,4 kBaud)
    • Cycle times < 3 msec
    • Process data IN 32 Byte (6 x process values from AX350): - Analog value 1 (scaled / linearized) and unit - Analog value 2 (scaled / linearized) and unit - Analog value 1 (scaled / linearized) with totalisation and unit - Analog value 2 (scaled / linearized) with totalisation and unit - Shortcut analogue value 1 (scaled / linearized) with analogue value 2  (scaled / linearized) and unit - Shortcut totalisator analogue value 1 (scaled / linearized) with totalisator analogue value 2 (scaled / linearized) and unit
    • Process data Out 8 Byte (2 x IO-Link process values to AX350): - IOL process value Out 1 with scaling, adjustable decimal point and programmable units - IOL process values Out 2 with scaling, adjustable decimal point and programmable units

    Combinable with further options:

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    Details

  • Motrona BY701-Firmware: Synchronization of Drives

    Features

    • MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
    • The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
    • Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
    • The number of successive axes can be extended arbitrarily via a cascading output.
    • MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
    • PROFIBUS connection possible via gateway PB251 (see accessories)
    Details

  • Motrona CA306: Simple Preset Unit for CAN-Bus

    Features

    • Power supply 10 ... 30 VDC
    • Compact norm panel housing
    • Preset range: 6 digits or 5 digits with sign
    • DIL-switch for set up of the transmission parameters
    • Dimension H x B x T = 96 x 48 x 140 mm (3.78 x 1.89 x 5.51 ")
    Details

  • Motrona CA340: Fieldbus Indicator for CAN-Bus (SDO and PDO)

    Features

    •  Power supply 10 ... 30 VDC
    • Compact norm panel housing
    • 6 digits LED display with 15 mm height
    • Display range -199999 ... 999999
    • DIL-switch for setup of the transmission parameters
    • Dimension H x B x T = 96 x 48 x 140 mm (3.78 x 1.89 x 5.12 ")
    Details

  • Motrona DM350: touchMATRIX® Strain Gauge Indicator for force sensors (full bridge)

    Features

    • Strain gauge input, 6-wire connection
    • Input pt100 and thermocouples (J and K)
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • Adjustable bridge voltage 3 VDC to 10 VDC
    • 1 … 10 mV sensitivity
    • Standard installation housing with 96 x 48 mm and protection class IP65
    • Bright and high-contrast graphic display with event-dependent color variants
    • Emulation of a 7-segment display with symbols and units
    • Intuitive and simple parameterization through plain text and touchscreen
    • Numerous functions such as tare, filter, averaging
    • Linearization with 24 support points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    • Option IO: IO-Link Device V1.1
    Options can be combined.
    Details

  • Motrona DP350: touchMATRIX® Indicator for transonic distance measurement

    Features

    • Start-stop interface for absolute transducers and magnetostrictive sensors
    • Adjustable frequency of the init pulses from 62.5 Hz to 5 kHz
    • 3 control inputs for HTL / PNP signals
    • Power supply 18 ... 30 VDC
    • Auxiliary voltage output 24 VDC or 5 VDC for encoder supply
    • 8-decade LCD display (colour: red, green, yellow)
    • Resistive touchscreen
    • Standard housing with 96 x 48 mm and IP65 protection
    • Intuitive and easy parameterization by plain text and touchscreen
    • Numerous functions such as scaling, filter, zero offset, counting direction etc.
    • Linearization with 24 interpolation points

    Options

    • Option AC: Power supply 115 ... 230 VAC
    • Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
    • Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
    • Option CO: 4 control outputs, serial RS232 interface
    • Option CR: 4 control outputs, serial RS485 interface
    • Option RL: 2 relay outputs
    Options can be combined.
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top