+44 (0)1903 788287
Filtered (11)
  • Encoder Technology 25T Through Hollow Shaft Incremental Encoder

    Encoder Technology 25H Blind Hollow Shaft Incremental Encoder

    Features

    • 5mm Opto-ASIC encoder with a low profile (50.8mm)
    • Imperial bore sizes range from 0.625” to 1.125”
    • Metric bore sizes ranging from 6 mm to 28 mm
    • Single replacement solution for 50.8mm to 88.9mm encoders
    • Resolutions to 10,000 PPR, frequencies to 1 MHz
    • Versatile flexible mounting options
    • RoHS compliant
    • Corrosion-Resistant Option
    Details
  • Encoder Technology 58TF Blind Hollow Shaft Encoder

    Encoder Technology 58TF Blind Hollow Shaft Incremental Encoder

    Features

    • 58 mm package available in thru-bore or hollow bore
    • Resolutions from 1 to 65,536 PPR
    • 6 different output types to choose from
    • 32 different waveforms available
    • Standard and Metric Bore Sizes up to 5/8” and 15 mm
    • Several Flexible Mounting Options
    • IP67 Sealing Available
    Details
  • Encoder Technology 755HS Blind Holow Shaft Encoder

    Encoder Technology 755HS Blind Hollow Shaft Incremental Encoder

    Features

    • Miniature size (38.1mm diameter)
    • Up to 30,000 PPR
    • Flex mounting & large hollow bore option (Up to 14mm)
    • High-temperature option
    Details
  • Encoder Technology 760 Through Hollow Shaft Incremental Encoder

    Encoder Technology 760 Blind Hollow Shaft Incremental Encoder

    Features

    • Size 25 / 63.5mm Diameter (Hollow Shaft)
    • Up to 12 Pole Commutation Available
    • Thru Bore and Blind Bore Options
    • Simple, Innovative Flexible Mounting System
    • Incorporates Opto-ASIC Technology
     
    Details
  • Encoder Technology A58HE1 Through Hollow Shaft Incremental Encoder

    Encoder Technology A58HE1 Blind Hollow Shaft Incremental Encoder

    Features

    • Number of output pulses per revolution 100-108000 ppr
    • Maximum shaft speed 10000 rpm
    • Permissible motion of shaft - axial: ± 0.5 mm- radial: ± 0.05 mm
    • Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
    • Starting torque at 20°C ≤ 0.025 Nm
    • Rotor moment of inertia < 1.5x10-4 kgm2
    • Protection (housing) (IEC 529) IP64
    • Protection (shaft side) (IEC 529) IP64
    • Maximum weight without cable 0.3 kg
    • Operating temperature -10...+70°C
    • Storage temperature -30...+80°C
    • Maximum humidity (non-condensing) 98%
    • Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
    • Permissible shock (5 ms) ≤ 1000 m/s²
    Details

  • Motrona BY340: Synchronous Controller for 1 Follower Axis

    Features

    • 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
    • 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 300 kHz
    • 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
    • 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
    • Loop time approx. 250 µs
    • Power supply 24 VAC and 17 … 40 VDC
    • Compact norm panel housing (according to EN 60715)
    • Top hat rail mounting by using SM300 support brackets (option)
    • Setup via keys or via PC by serial RS232 interface
    • PROFIBUS connection via Motrona gateway PB251
    Details

  • Motrona BY641: Master / Slave Synchronizers with 4 Relays

    Features

    • 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
    • 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
    • Input frequency up to 300 kHz
    • 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
    • 4 potential-free changeover relay outputs
    • 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
    • Loop time approx. 250 µs
    • Power supply 24 VAC and 17 … 40 VDC
    • Compact norm panel housing (according to EN 60715)
    • Top hat rail mounting by using SM600 support brackets (option)
    • Setup via keys or via PC by serial RS232 interface
    • PROFIBUS connection via Motrona gateway PB251
    Details

  • Motrona BY701-Firmware: Synchronization of Drives

    Features

    • MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
    • The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
    • Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
    • The number of successive axes can be extended arbitrarily via a cascading output.
    • MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
    • PROFIBUS connection possible via gateway PB251 (see accessories)
    Details

  • Motrona MC700: Intermittent Printing, Label Printing, Rotary Punching

    Features

    • 4 pulse inputs with format  A, /A, B, /B [RS422]
    • 4 scalable 12-bit analog inputs for ±10 V or 0/4 ... 20 mA
    • 8 control inputs for PNP signals [10 ... 30 VDC]
    • 4 scalable 12-bit analog outputs for ±10 V or 0/4 ... 20 mA
    • Short loop time (depending on application)
    • Power supply 18 ... 35 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • Setup via Windows operator software (free of charge)
    • OnBoard interfaces: RS232 and CANopen
    Details
  • Tamagawa Seiki TS5208N305 Hollowshaft Encoder OIH48 Series

    Tamagawa Hollowshaft Encoder OIH48 Series TS5208N305

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details
  • Tamagawa Seiki TS5208N530 Hollowshaft Encoder OIH48 Series

    Tamagawa Seiki TS5208N530 Hollowshaft Encoder OIH48 Series

    Features

    • Hollow Shaft Small Size
    • Resolution (Counts/Turn): 1,000∼12,000C/T
    • Output Phase: A, B, Z, EU, EV, EW Phase
    • Max Response Frequency: 200kHz
    • Supply Voltage: DC+5V
    • Consumption Current: 200mA Max
    • Output Form: Line Driver
    • Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
    • Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
    • Protection: IP=40
    • Operating Temp. Range: -20∼+85°C
    • Vibration: 49m/s2(5G)
    • Shock: 980m/s2(100G)
    • Mass: 0.3kg Max
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top