+44 (0)1903 788287
Filtered (75)

  • CT701-Firmware: Eccentric Material Processing

    Features

    • MC700 is a universal motion controller for 1 to 4 axis, programmable for multiple motion applications by simple download of the corresponding function firmware
    • With the use of Matona's CT701 firmware, this unit provides excellent solutions with all kinds of guillotine cutters and rotary eccentric shears needing a cosine-compensated speed profile during the penetration of the tool
    • Extremely smooth motion  to protect  mechanical solution, by self-optimizing polynomial speed transitions
    • High cutting accuracy, even during line acceleration and at high speeds
    • Programmable cosine-compensated speed profile
    • Special torque control features to master the impact load when cutting hard materials like stainless steel etc.
    • Special profile features to avoid deadlock between tool and material
    • Embedded virtual master axis (selectable)
    • Black-box unit for cabinet mounting
    • Remote control and communication facilities via external operator terminal, serial PC communication, PROFIBUS or optional via CANBUS (MC700/CI) etc.
    Details

  • CT803-Firmware: Rotating Cross Cutters

    Features

    • 2 pulse inputs with format  A, /A, B, /B, Z, /Z [HTL, RS422]
    • With an input frequency of up to 2 MHz
    • 2 control inputs with format  SIN+, SIN-, COS+, COS- [1 Vss] with an input frequency of up to 400 kHz
    • 2 SSI inputs with format  DATA+, DATA-, CLOCK+, CLOCK- up to 25 Bit, with SSI switching frequency of 100 Hz ... 1 MHz
    • 2 scalable 14-bit analog inputs for ±10 V or 0/4 ... 20 mA
    • 4 control inputs for PNP / NPN signals [10 ... 30 VDC]
    • 4 fast interrupt inputs for PNP / NPN signals [10 ... 30 VDC]
    • 1 pulse output with format  A, /A, B, /B, Z, /Z [RS422]
    • 4 control outputs with push-pull characteristic, short-circuit-proof [5 ... 30 VDC]
    • 2 scalable 14-bit analog outputs for ±10 V or 0/4 ... 20 mA
    • Loop time approx. 250 µs
    • Power supply 18 ... 35 VDC
    • Snap-on housing for top-hat rail (according to EN 60715)
    • OnBoard interfaces: Ethernet / IP, RS232 / RS485, USB 2.0, CANopen, Modbus RTU
    • Optional Ethernet interfaces: EtherCAT, Ethernet / IP, Modbus TCP, Powerlink, PROFINET, SERCOS III
    • Optional Fieldbus interfaces (slave): CC-Link, DeviceNet, PROFIBUS
    • Operates with all 4-Q-drive systems, equipped with a standardized drive communication bus (e. g. SERCOS-II). Alternatively, ±10 V setpoint can be used
    • The controllers can be setup by an external operator terminal as well as HMI’s via standardized factory communication bus e.g. PROFINET
    • Setup via Windows operator software (free of charge)
    Details
  • 011-3INC-PCI 3 Axis PCI Incremental Encoder Interface

    Deva Electronic Controls 3 Axis PCI Incremental Encoder Interface

    Features

    • 3 x 32-bit 10MHz position registers
    • Marker input for each channel
    • Fully featured, Renishaw probe input
    • Synchronisation and triggering facilities
    • 48 configurable digital IO
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • ±5v& ±12v fused encoder supplies
    • 32-bit PCI 2.2 Plug 'n' Play compatible
    • Support & demonstration software
    **We can offer same day delivery within the UK. Next day delivery to many European countries and the USA.
    Details
  • 037-3INC-REN-USB 3 Axis USB Incremental Encoder Interface

    Deva Electronic Controls 3 Axis USB Incremental Encoder Interface

    Features

    • 3 x 32 bit 10Mhz position registers
    • Marker input for each channel
    • Fully featured Renishaw probe input
    • Dual input optical edge detector system
    • Differential or single ended inputs
    • 3 stage digital input filters
    • USB 2.0 plug and play compatible
    • Comprehensive user manual
    • Support & demonstration software on USB
    • Windows XP/7/8/10 32 and 64 bit
    **We can offer same day delivery within the UK. Next day delivery to many European countries and the USA.
    Details
  • Deva Electronics 037-3INC-REN-USB-E1 3 Axis USB Incremental Encoder Interface with power supply

    Deva Electronic Controls 3 Axis USB Incremental Encoder Interface with power supply

    Features

    • 3 x 32 bit 10Mhz position registers
    • Marker input for each channel
    • Fully featured Renishaw probe input
    • Dual input optical edge detector system
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • USB 2.0 plug-and-play compatible
    • Comprehensive user manual
    • Support & demonstration software on USB
    • Windows XP/7/8/10 32 and 64-bit
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
    Details

  • Deva Electronic Controls 3 Axis USB Incremental Encoder Interface without power supply

    Features

    • 3 x 32 bit 10Mhz position registers
    • Marker input for each channel
    • Fully featured Renishaw probe input
    • Dual input optical edge detector system
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • USB 2.0 plug-and-play compatible
    • Comprehensive user manual
    • Support & demonstration software on USB
    • Windows XP/7/8/10 32 and 64-bit
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
    Details
  • 001-4SSI-IO-PCIE 4 Axis PCI Express Absolute SSI Encoder Interface

    Deva Electronic Controls 4 Axis PCI Express Absolute SSI Encoder Interface

    Features

    • 4 x 32-bit position registers
    • Programmable data & scan rates
    • Programmable bit length
    • Synchronisation and triggering facilities
    • 48 configurable digital IO
    • Power fail/parity detection
    • Gray/binary formats
    • ±5v & ±12v fused encoder supplies
    • x1 PCIe 2.0 Plug 'n' Play compatible
    • Support & demonstration software USB
    **We can offer same day delivery within the UK. Next day delivery to many European countries and the USA.
    Details
  • 001-3SSI-PCI 3 Axis PCI Absolute SSI Encoder Interface

    Deva Electronic Controls 4 Axis PCI Express Incremental Encoder Interface

    Features

    • 4 x 32 40Mhz position registers
    • Marker input for each channel
    • Fully featured, Renishaw probe input
    • Synchronisation and triggering facilities
    • 48 configurable digital IO
    • Differential or single-ended inputs
    • 3 stage digital input filters
    • ±5v& ±12v fused encoder supplies
    • x1 PCIe 2.0 plug-and-play compatible
    • Comprehensive user manual
    • Support & demonstration software
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
    Details
  • 018-1SIN Single Axis Sinewave Interpolator

    Deva Electronic Controls Single Axis Sinewave Interpolator

    Features:

    • Selectable interpolation factor 10, 25, 50, 100
    • Accepts 11µA or 1vpp or 2Vpp signals
    • Handles marker/index channel
    • Maximum input frequency 125kHz
    • Maximum output frequency 5MHz
    • Extremely small form factor
    • RS422 line driver output
    • Fully synchronous operation
    • +5v operation
    **We can offer same-day delivery within the UK. Next-day delivery to many European countries and the USA.
    Details
  • Encoder Technology 925 Single Turn Standard Shaft Absoulte Encoder

    Encoder Technology 925 Single Turn Standard Shaft Absolute Encoder

    Features

    • Standard Size 25 package (2.5")
    • Resolutions up to 12-bit (4096 counts)
    • Incorporates Opto-ASIC technology
    • Industrial-grade, heavy-duty housing
    • Optional IP67 seal
    Details
  • Encoder Technology 960 Single Turn Hollow Shaft Absolute Encoder

    Encoder Technology 960 Single Turn Hollow Shaft Absolute Encoder

    Features

    • Low profile—40mm
    • Thru-bore or hollow-bore styles
    • Industrial-grade, heavy-duty housing
    • State-of-the-art Opto-ASIC circuitry
    Details
  • Encoder Technology MA36H Muti-turn Hollowshaft Encoder

    Encoder Technology MA36H

    Features

    • Standard Size 36mm package (1.42")
    • Durable magnetic technology
    • Multiturn absolute encoder (12-bit/39-bit)
    • SSI and CANopen communications
    • Proven new turns counting technology — no gears or batteries
    Details
  • Encoder Technology MA36S Muti-turn Standard Shaft Encoder

    Encoder Technology MA36S Muti-turn Standard Shaft Absolute Encoder

    Features

    • Standard Size 36mm package (1.42")
    • Durable magnetic technology
    • Multiturn absolute encoder (12-bit/39-bit)
    • SSI and CANopen communications
    • Proven new turns counting technology — no gears or batteries
    Details
  • Encoder Technology MA58H Series Multi Turn Hollowshaft Absolute

    Encoder Technology MA58H Series Multi Turn Hollowshaft Absolute Encoder

    Features

    • Multi-Turn Absolute Encoder (14 Bit/39 Bit)
    • SSI and CANopen Communications
    • 58 mm Diameter
    • Durable Magnetic Technology
    • Proven Turns Counting Technology – No Gears or Batteries
    • Retains Absolute Position After a Power Outage
    Details
  • Encoder Technology SA36H Single Turn Hollow Shaft Encoder

    Encoder Technology SA36H Single Turn Hollow Shaft Absolute Encoder

    Features

    • Standard Size 36mm package
    • Durable magnetic technology
    • Up to 14 bits of single-turn resolution
    • SSI and CANopen communications
    • Proven turns counting technology—no gears or batteries
    • Flex mount eliminates couplings and is ideal for motors or shafts
    Details
  • Encoder Technology SA36S Single Turn Standard Shaft Absolut

    Encoder Technology SA36S Single Turn Standard Shaft Absolute Encoder

    Features

    • Standard size 36 mm package (1.42")
    • Durable magnetic technology
    • Up to 14 bits of single-turn resolution
    • SSI and CANopen communications
    • Proven new turns counting technology — no gears or batteries
    Details
  • Encoder Technology SA58H Single Turn Hollow Shaft Absolute Encoder

    Encoder Technology SA58H Single Turn Hollow Shaft Absolute Encoder

    Features

    • Up to 14 Bits of Single-Turn Resolution
    • SSI and CANopen Communications
    • 58 mm Diameter
    • Durable Magnetic Technology
    • Retains Absolute Position After a Power Outage
    Details
  • Encoder Technology TBX36 Standard Shaft Absolute Encoder

    Encoder Technology TBX36 Single Turn Standard Shaft Absolute Encoders

    Features

    • Robust aluminium or stainless steel housing (wall thicknesses up to 5 mm)
    • Stainless steel shaft and ball bearing - ball bearing with Simmer ring
    • Rotor with shaft and permanent magnet mounted in pre-chamber
    • Sensor circuit consisting of ASIC
    • Hall elements and interface electronics in enclosed main chamber
    • Housing protection type IP 69K additionally cast
    • Electrical connection via cable (open cable ends)
    Details
  • Encoder Technology SA36S Single Turn Standard Shaft Absolut

    Encoder Technology TBX42 Single Turn Standard Shaft Absolute Encoder

    Features

    • Interface: SSI
    • Design: 42mm
    • Housing Material: Aluminium, stainless steel
    • Flange & Shaft: Synchroniser flange
    • Resolution: 4096 steps/360°<)
    • Code type: Binary, Gray (optional)
    • Electrical connection: Cable 1m
    • Electrical and/or mechanical variant: Basic version
    Details

  • Encoder Technology TBX50 Single Turn Standard Shaft Absolute Encoder

    Features

    • Robust aluminium or stainless steel housing (wall thicknesses up to 5 mm)
    • Stainless steel shaft and ball bearing - ball bearing with Simmer ring
    • Rotor with shaft and permanent magnet mounted in pre-chamber
    • Sensor circuit consisting of ASIC
    • Hall elements and interface electronics in enclosed main chamber
    • Housing protection type IP 69K additionally cast
    • Electrical connection via cable (open cable ends)
    Details

  • Motrona BY701-Firmware: Synchronization of Drives

    Features

    • MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
    • The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
    • Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
    • The number of successive axes can be extended arbitrarily via a cascading output.
    • MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
    • PROFIBUS connection possible via gateway PB251 (see accessories)
    Details

  • Motrona CI700: CAN-Bus Interface

    Features

    Processor:
    • Siemens C515C operating at 10 MHz
    Power supply:
    • Using internal power of the motion controller
    CAN Communication:
    • DIN ISO 11898
    • CANopen (CiA DS301)
    Baud rates:
    • 10, 20, 50, 125, 250, 500, 1000 kBit/s (adjustable)
    Details

  • Motrona CI800: CANopen Interface Module

    Features

    • Internal power supply 3,3 V
    • Ambient temperature 0° C ... +60° C / 32° F ... 140° F (operating), -40° C ... +70° C / -40° F ... 158° F (storage)
    • 10, 20, 50, 100, 125, 250, 500, 800 und 1000 kbps Baud rates
    • SUB-D-9-pin male, galvanically isolated
    Details

  • Motrona DM221: Strain Gauge Amplifier >>> Analog

    Features

    • 6-wire connection for one strain gauge full bridge sensor
    • 4 control inputs [HTL/PNP]
    • 1 analog output ±10 V, 0/4 ... 20 mA, 16 bit
    • 4 control outputs for signalling different operation states
    • Power supply 18 ... 30 VDC
    • Functions for scaling and linking the sensor signals (e.g. A+B, A-B, ...)
    • Adjustable bridge voltage per sensor from 3 VDC ... 10 VDC
    • Sensitivity of the sensor inputs 1 ... 10 mV
    • Transmission of the sensor data via RS485
    • Programming via USB and the user interface OS (freeware)
    • Protection class IP20
    • Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
    Details

  • Motrona DM222: 2 channel Strain Gauge Amplifier >>> Analog

    Features

    • 6-wire connection for two independent strain gauge full bridge sensors
    • 4 control inputs [HTL/PNP]
    • 2 independent analog outputs ±10 V, 0/4 ... 20 mA, 16 bit
    • 4 control outputs for signalling different operation states
    • Power supply 18 ... 30 VDC
    • Functions for scaling and linking the sensor signals (e.g. A+B, A-B, ...)
    • Adjustable bridge voltage per sensor from 3 VDC ... 10 VDC
    • Sensitivity of the sensor inputs 1 ... 10 mV
    • Transmission of the sensor data via RS485
    • Programming via USB and the user interface OS (freeware)
    • Protection class IP20
    • Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
    Details

Title

Company reg # : 4359149
VAT Reg #: 860 5449 17

Copyright © 2018 Encoder Technology Ltd. All Rights Reserved.
Go to Top